| Message ID | 1405116252-53612-3-git-send-email-s-anna@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri 2014-07-11 17:04:09, Suman Anna wrote: > Logic has been added to the OMAP2+ mailbox code to parse the > mailbox dt nodes and construct the different sub-mailboxes > associated with the instance. The DT representation of the > sub-mailbox devices is different from legacy platform data > representation to allow flexibility of interrupt configuration > between Tx and Rx fifos (to also possibly allow simplex devices > in the future). The DT representation gathers similar information > that was being passed previously through the platform data, except > for the number of fifos, interrupts and interrupt type information, > which are gathered through driver compatible match data. > > The non-DT support has to be maintained for now to not break > OMAP3 legacy boot, and the legacy-style code will be cleaned > up once OMAP3 is also converted to DT-boot only. > > Cc: Jassi Brar <jassisinghbrar@gmail.com> > Cc: Rob Herring <robh+dt@kernel.org> > Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz>
If I may nit-pick here for a minute... On 11 July 2014 15:04, Suman Anna <s-anna@ti.com> wrote: > Logic has been added to the OMAP2+ mailbox code to parse the > mailbox dt nodes and construct the different sub-mailboxes > associated with the instance. The DT representation of the > sub-mailbox devices is different from legacy platform data > representation to allow flexibility of interrupt configuration > between Tx and Rx fifos (to also possibly allow simplex devices > in the future). The DT representation gathers similar information > that was being passed previously through the platform data, except > for the number of fifos, interrupts and interrupt type information, > which are gathered through driver compatible match data. > > The non-DT support has to be maintained for now to not break > OMAP3 legacy boot, and the legacy-style code will be cleaned > up once OMAP3 is also converted to DT-boot only. > > Cc: Jassi Brar <jassisinghbrar@gmail.com> > Cc: Rob Herring <robh+dt@kernel.org> > Signed-off-by: Suman Anna <s-anna@ti.com> > --- > drivers/mailbox/omap-mailbox.c | 156 ++++++++++++++++++++++++++++++++++------- > 1 file changed, 132 insertions(+), 24 deletions(-) > > diff --git a/drivers/mailbox/omap-mailbox.c b/drivers/mailbox/omap-mailbox.c [...] > static int omap_mbox_probe(struct platform_device *pdev) > { > struct resource *mem; > int ret; > struct omap_mbox **list, *mbox, *mboxblk; > struct omap_mbox_pdata *pdata = pdev->dev.platform_data; > - struct omap_mbox_dev_info *info; > + struct omap_mbox_dev_info *info = NULL; > + struct omap_mbox_fifo_info *finfo, *finfoblk; > struct omap_mbox_device *mdev; > struct omap_mbox_fifo *fifo; > - u32 intr_type; > + struct device_node *node = pdev->dev.of_node; > + struct device_node *child; > + const struct of_device_id *match; > + u32 intr_type, info_count; > + u32 num_users, num_fifos; > + u32 tmp[3]; > u32 l; > int i; > > - if (!pdata || !pdata->info_cnt || !pdata->info) { > + if (!node && (!pdata || !pdata->info_cnt || !pdata->info)) { > pr_err("%s: platform not supported\n", __func__); > return -ENODEV; > } > > + if (node) { I noticed here you are using if (node) /* DT stuff goes here */ else /* non-DT stuff goes here */ but below the logic is reversed. > + match = of_match_device(omap_mailbox_of_match, &pdev->dev); > + if (!match) > + return -ENODEV; > + intr_type = (u32)match->data; > + > + if (of_property_read_u32(node, "ti,mbox-num-users", > + &num_users)) > + return -ENODEV; > + > + if (of_property_read_u32(node, "ti,mbox-num-fifos", > + &num_fifos)) > + return -ENODEV; > + > + info_count = of_get_available_child_count(node); > + if (!info_count) { > + dev_err(&pdev->dev, "no available mbox devices found\n"); > + return -ENODEV; > + } > + } else { /* non-DT device creation */ > + info_count = pdata->info_cnt; > + info = pdata->info; > + intr_type = pdata->intr_type; > + num_users = pdata->num_users; > + num_fifos = pdata->num_fifos; > + } > + > + finfoblk = devm_kzalloc(&pdev->dev, info_count * sizeof(*finfoblk), > + GFP_KERNEL); > + if (!finfoblk) > + return -ENOMEM; > + > + finfo = finfoblk; > + child = NULL; > + for (i = 0; i < info_count; i++, finfo++) { > + if (!node) { Here it's if (!node) /* non-DT stuff */ else /* DT stuff */ I think the "if (node) ..." version is a bit cleaner. Besides it's nice if code is consistent. Do you mind changing the if statement here so it matches the logic used above? > + finfo->tx_id = info->tx_id; > + finfo->rx_id = info->rx_id; > + finfo->tx_usr = info->usr_id; > + finfo->tx_irq = info->irq_id; > + finfo->rx_usr = info->usr_id; > + finfo->rx_irq = info->irq_id; > + finfo->name = info->name; > + info++; > + } else { > + child = of_get_next_available_child(node, child); > + ret = of_property_read_u32_array(child, "ti,mbox-tx", > + tmp, ARRAY_SIZE(tmp)); > + if (ret) > + return ret; > + finfo->tx_id = tmp[0]; > + finfo->tx_irq = tmp[1]; > + finfo->tx_usr = tmp[2]; > + > + ret = of_property_read_u32_array(child, "ti,mbox-rx", > + tmp, ARRAY_SIZE(tmp)); > + if (ret) > + return ret; > + finfo->rx_id = tmp[0]; > + finfo->rx_irq = tmp[1]; > + finfo->rx_usr = tmp[2]; > + > + finfo->name = child->name; > + } > + if (finfo->tx_id >= num_fifos || finfo->rx_id >= num_fifos || > + finfo->tx_usr >= num_users || finfo->rx_usr >= num_users) > + return -EINVAL; > + } > + -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Markus, On 07/16/2014 03:50 PM, Markus Mayer wrote: > If I may nit-pick here for a minute... > > On 11 July 2014 15:04, Suman Anna <s-anna@ti.com> wrote: >> Logic has been added to the OMAP2+ mailbox code to parse the >> mailbox dt nodes and construct the different sub-mailboxes >> associated with the instance. The DT representation of the >> sub-mailbox devices is different from legacy platform data >> representation to allow flexibility of interrupt configuration >> between Tx and Rx fifos (to also possibly allow simplex devices >> in the future). The DT representation gathers similar information >> that was being passed previously through the platform data, except >> for the number of fifos, interrupts and interrupt type information, >> which are gathered through driver compatible match data. >> >> The non-DT support has to be maintained for now to not break >> OMAP3 legacy boot, and the legacy-style code will be cleaned >> up once OMAP3 is also converted to DT-boot only. >> >> Cc: Jassi Brar <jassisinghbrar@gmail.com> >> Cc: Rob Herring <robh+dt@kernel.org> >> Signed-off-by: Suman Anna <s-anna@ti.com> >> --- >> drivers/mailbox/omap-mailbox.c | 156 ++++++++++++++++++++++++++++++++++------- >> 1 file changed, 132 insertions(+), 24 deletions(-) >> >> diff --git a/drivers/mailbox/omap-mailbox.c b/drivers/mailbox/omap-mailbox.c > > [...] > >> static int omap_mbox_probe(struct platform_device *pdev) >> { >> struct resource *mem; >> int ret; >> struct omap_mbox **list, *mbox, *mboxblk; >> struct omap_mbox_pdata *pdata = pdev->dev.platform_data; >> - struct omap_mbox_dev_info *info; >> + struct omap_mbox_dev_info *info = NULL; >> + struct omap_mbox_fifo_info *finfo, *finfoblk; >> struct omap_mbox_device *mdev; >> struct omap_mbox_fifo *fifo; >> - u32 intr_type; >> + struct device_node *node = pdev->dev.of_node; >> + struct device_node *child; >> + const struct of_device_id *match; >> + u32 intr_type, info_count; >> + u32 num_users, num_fifos; >> + u32 tmp[3]; >> u32 l; >> int i; >> >> - if (!pdata || !pdata->info_cnt || !pdata->info) { >> + if (!node && (!pdata || !pdata->info_cnt || !pdata->info)) { >> pr_err("%s: platform not supported\n", __func__); >> return -ENODEV; >> } >> >> + if (node) { > > I noticed here you are using > > if (node) > /* DT stuff goes here */ > else > /* non-DT stuff goes here */ > > but below the logic is reversed. > >> + match = of_match_device(omap_mailbox_of_match, &pdev->dev); >> + if (!match) >> + return -ENODEV; >> + intr_type = (u32)match->data; >> + >> + if (of_property_read_u32(node, "ti,mbox-num-users", >> + &num_users)) >> + return -ENODEV; >> + >> + if (of_property_read_u32(node, "ti,mbox-num-fifos", >> + &num_fifos)) >> + return -ENODEV; >> + >> + info_count = of_get_available_child_count(node); >> + if (!info_count) { >> + dev_err(&pdev->dev, "no available mbox devices found\n"); >> + return -ENODEV; >> + } >> + } else { /* non-DT device creation */ >> + info_count = pdata->info_cnt; >> + info = pdata->info; >> + intr_type = pdata->intr_type; >> + num_users = pdata->num_users; >> + num_fifos = pdata->num_fifos; >> + } >> + >> + finfoblk = devm_kzalloc(&pdev->dev, info_count * sizeof(*finfoblk), >> + GFP_KERNEL); >> + if (!finfoblk) >> + return -ENOMEM; >> + >> + finfo = finfoblk; >> + child = NULL; >> + for (i = 0; i < info_count; i++, finfo++) { >> + if (!node) { > > Here it's > if (!node) > /* non-DT stuff */ > else > /* DT stuff */ > > I think the "if (node) ..." version is a bit cleaner. Besides it's > nice if code is consistent. Do you mind changing the if statement here > so it matches the logic used above? No, not at all, I will fix this up in the next version. I have to revise the framework adaptation patches anyway (remove tidspbridge changes as that driver is getting deleted and add a missing of_node_put). Do you prefer that I split up this series between DT conversion and framework adaptation or good with posting all the patches together? If latter, I will refresh it once the v9 version of the framework comes out. regards Suman > >> + finfo->tx_id = info->tx_id; >> + finfo->rx_id = info->rx_id; >> + finfo->tx_usr = info->usr_id; >> + finfo->tx_irq = info->irq_id; >> + finfo->rx_usr = info->usr_id; >> + finfo->rx_irq = info->irq_id; >> + finfo->name = info->name; >> + info++; >> + } else { >> + child = of_get_next_available_child(node, child); >> + ret = of_property_read_u32_array(child, "ti,mbox-tx", >> + tmp, ARRAY_SIZE(tmp)); >> + if (ret) >> + return ret; >> + finfo->tx_id = tmp[0]; >> + finfo->tx_irq = tmp[1]; >> + finfo->tx_usr = tmp[2]; >> + >> + ret = of_property_read_u32_array(child, "ti,mbox-rx", >> + tmp, ARRAY_SIZE(tmp)); >> + if (ret) >> + return ret; >> + finfo->rx_id = tmp[0]; >> + finfo->rx_irq = tmp[1]; >> + finfo->rx_usr = tmp[2]; >> + >> + finfo->name = child->name; >> + } >> + if (finfo->tx_id >= num_fifos || finfo->rx_id >= num_fifos || >> + finfo->tx_usr >= num_users || finfo->rx_usr >= num_users) >> + return -EINVAL; >> + } >> + -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mailbox/omap-mailbox.c b/drivers/mailbox/omap-mailbox.c index a27e00e..73eb0fb 100644 --- a/drivers/mailbox/omap-mailbox.c +++ b/drivers/mailbox/omap-mailbox.c @@ -31,6 +31,7 @@ #include <linux/err.h> #include <linux/notifier.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/platform_data/mailbox-omap.h> @@ -94,6 +95,18 @@ struct omap_mbox_device { struct list_head elem; }; +struct omap_mbox_fifo_info { + int tx_id; + int tx_usr; + int tx_irq; + + int rx_id; + int rx_usr; + int rx_irq; + + const char *name; +}; + struct omap_mbox { const char *name; int irq; @@ -587,24 +600,118 @@ static int omap_mbox_unregister(struct omap_mbox_device *mdev) return 0; } +static const struct of_device_id omap_mailbox_of_match[] = { + { + .compatible = "ti,omap2-mailbox", + .data = (void *)MBOX_INTR_CFG_TYPE1, + }, + { + .compatible = "ti,omap3-mailbox", + .data = (void *)MBOX_INTR_CFG_TYPE1, + }, + { + .compatible = "ti,omap4-mailbox", + .data = (void *)MBOX_INTR_CFG_TYPE2, + }, + { + /* end */ + }, +}; +MODULE_DEVICE_TABLE(of, omap_mailbox_of_match); + static int omap_mbox_probe(struct platform_device *pdev) { struct resource *mem; int ret; struct omap_mbox **list, *mbox, *mboxblk; struct omap_mbox_pdata *pdata = pdev->dev.platform_data; - struct omap_mbox_dev_info *info; + struct omap_mbox_dev_info *info = NULL; + struct omap_mbox_fifo_info *finfo, *finfoblk; struct omap_mbox_device *mdev; struct omap_mbox_fifo *fifo; - u32 intr_type; + struct device_node *node = pdev->dev.of_node; + struct device_node *child; + const struct of_device_id *match; + u32 intr_type, info_count; + u32 num_users, num_fifos; + u32 tmp[3]; u32 l; int i; - if (!pdata || !pdata->info_cnt || !pdata->info) { + if (!node && (!pdata || !pdata->info_cnt || !pdata->info)) { pr_err("%s: platform not supported\n", __func__); return -ENODEV; } + if (node) { + match = of_match_device(omap_mailbox_of_match, &pdev->dev); + if (!match) + return -ENODEV; + intr_type = (u32)match->data; + + if (of_property_read_u32(node, "ti,mbox-num-users", + &num_users)) + return -ENODEV; + + if (of_property_read_u32(node, "ti,mbox-num-fifos", + &num_fifos)) + return -ENODEV; + + info_count = of_get_available_child_count(node); + if (!info_count) { + dev_err(&pdev->dev, "no available mbox devices found\n"); + return -ENODEV; + } + } else { /* non-DT device creation */ + info_count = pdata->info_cnt; + info = pdata->info; + intr_type = pdata->intr_type; + num_users = pdata->num_users; + num_fifos = pdata->num_fifos; + } + + finfoblk = devm_kzalloc(&pdev->dev, info_count * sizeof(*finfoblk), + GFP_KERNEL); + if (!finfoblk) + return -ENOMEM; + + finfo = finfoblk; + child = NULL; + for (i = 0; i < info_count; i++, finfo++) { + if (!node) { + finfo->tx_id = info->tx_id; + finfo->rx_id = info->rx_id; + finfo->tx_usr = info->usr_id; + finfo->tx_irq = info->irq_id; + finfo->rx_usr = info->usr_id; + finfo->rx_irq = info->irq_id; + finfo->name = info->name; + info++; + } else { + child = of_get_next_available_child(node, child); + ret = of_property_read_u32_array(child, "ti,mbox-tx", + tmp, ARRAY_SIZE(tmp)); + if (ret) + return ret; + finfo->tx_id = tmp[0]; + finfo->tx_irq = tmp[1]; + finfo->tx_usr = tmp[2]; + + ret = of_property_read_u32_array(child, "ti,mbox-rx", + tmp, ARRAY_SIZE(tmp)); + if (ret) + return ret; + finfo->rx_id = tmp[0]; + finfo->rx_irq = tmp[1]; + finfo->rx_usr = tmp[2]; + + finfo->name = child->name; + } + if (finfo->tx_id >= num_fifos || finfo->rx_id >= num_fifos || + finfo->tx_usr >= num_users || finfo->rx_usr >= num_users) + return -EINVAL; + } + mdev = devm_kzalloc(&pdev->dev, sizeof(*mdev), GFP_KERNEL); if (!mdev) return -ENOMEM; @@ -615,41 +722,40 @@ static int omap_mbox_probe(struct platform_device *pdev) return PTR_ERR(mdev->mbox_base); /* allocate one extra for marking end of list */ - list = devm_kzalloc(&pdev->dev, (pdata->info_cnt + 1) * sizeof(*list), + list = devm_kzalloc(&pdev->dev, (info_count + 1) * sizeof(*list), GFP_KERNEL); if (!list) return -ENOMEM; - mboxblk = devm_kzalloc(&pdev->dev, pdata->info_cnt * sizeof(*mbox), + mboxblk = devm_kzalloc(&pdev->dev, info_count * sizeof(*mbox), GFP_KERNEL); if (!mboxblk) return -ENOMEM; - info = pdata->info; - intr_type = pdata->intr_type; mbox = mboxblk; - for (i = 0; i < pdata->info_cnt; i++, info++) { + finfo = finfoblk; + for (i = 0; i < info_count; i++, finfo++) { fifo = &mbox->tx_fifo; - fifo->msg = MAILBOX_MESSAGE(info->tx_id); - fifo->fifo_stat = MAILBOX_FIFOSTATUS(info->tx_id); - fifo->intr_bit = MAILBOX_IRQ_NOTFULL(info->tx_id); - fifo->irqenable = MAILBOX_IRQENABLE(intr_type, info->usr_id); - fifo->irqstatus = MAILBOX_IRQSTATUS(intr_type, info->usr_id); - fifo->irqdisable = MAILBOX_IRQDISABLE(intr_type, info->usr_id); + fifo->msg = MAILBOX_MESSAGE(finfo->tx_id); + fifo->fifo_stat = MAILBOX_FIFOSTATUS(finfo->tx_id); + fifo->intr_bit = MAILBOX_IRQ_NOTFULL(finfo->tx_id); + fifo->irqenable = MAILBOX_IRQENABLE(intr_type, finfo->tx_usr); + fifo->irqstatus = MAILBOX_IRQSTATUS(intr_type, finfo->tx_usr); + fifo->irqdisable = MAILBOX_IRQDISABLE(intr_type, finfo->tx_usr); fifo = &mbox->rx_fifo; - fifo->msg = MAILBOX_MESSAGE(info->rx_id); - fifo->msg_stat = MAILBOX_MSGSTATUS(info->rx_id); - fifo->intr_bit = MAILBOX_IRQ_NEWMSG(info->rx_id); - fifo->irqenable = MAILBOX_IRQENABLE(intr_type, info->usr_id); - fifo->irqstatus = MAILBOX_IRQSTATUS(intr_type, info->usr_id); - fifo->irqdisable = MAILBOX_IRQDISABLE(intr_type, info->usr_id); + fifo->msg = MAILBOX_MESSAGE(finfo->rx_id); + fifo->msg_stat = MAILBOX_MSGSTATUS(finfo->rx_id); + fifo->intr_bit = MAILBOX_IRQ_NEWMSG(finfo->rx_id); + fifo->irqenable = MAILBOX_IRQENABLE(intr_type, finfo->rx_usr); + fifo->irqstatus = MAILBOX_IRQSTATUS(intr_type, finfo->rx_usr); + fifo->irqdisable = MAILBOX_IRQDISABLE(intr_type, finfo->rx_usr); mbox->intr_type = intr_type; mbox->parent = mdev; - mbox->name = info->name; - mbox->irq = platform_get_irq(pdev, info->irq_id); + mbox->name = finfo->name; + mbox->irq = platform_get_irq(pdev, finfo->tx_irq); if (mbox->irq < 0) return mbox->irq; list[i] = mbox++; @@ -657,8 +763,8 @@ static int omap_mbox_probe(struct platform_device *pdev) mutex_init(&mdev->cfg_lock); mdev->dev = &pdev->dev; - mdev->num_users = pdata->num_users; - mdev->num_fifos = pdata->num_fifos; + mdev->num_users = num_users; + mdev->num_fifos = num_fifos; mdev->mboxes = list; ret = omap_mbox_register(mdev); if (ret) @@ -684,6 +790,7 @@ static int omap_mbox_probe(struct platform_device *pdev) if (ret < 0) goto unregister; + devm_kfree(&pdev->dev, finfoblk); return 0; unregister: @@ -708,6 +815,7 @@ static struct platform_driver omap_mbox_driver = { .driver = { .name = "omap-mailbox", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(omap_mailbox_of_match), }, };
Logic has been added to the OMAP2+ mailbox code to parse the mailbox dt nodes and construct the different sub-mailboxes associated with the instance. The DT representation of the sub-mailbox devices is different from legacy platform data representation to allow flexibility of interrupt configuration between Tx and Rx fifos (to also possibly allow simplex devices in the future). The DT representation gathers similar information that was being passed previously through the platform data, except for the number of fifos, interrupts and interrupt type information, which are gathered through driver compatible match data. The non-DT support has to be maintained for now to not break OMAP3 legacy boot, and the legacy-style code will be cleaned up once OMAP3 is also converted to DT-boot only. Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Suman Anna <s-anna@ti.com> --- drivers/mailbox/omap-mailbox.c | 156 ++++++++++++++++++++++++++++++++++------- 1 file changed, 132 insertions(+), 24 deletions(-)