[v5,1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY

Message ID	1403030008-20675-1-git-send-email-galak@codeaurora.org (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> sender: galak@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id 53B7A140754; Tue, 17 Jun 2014 18:33:29 +0000 (UTC) From: Kumar Gala <galak@codeaurora.org> To: Kishon Vijay Abraham I <kishon@ti.com> Subject: [PATCH v5 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY Date: Tue, 17 Jun 2014 13:33:28 -0500 Message-Id: <1403030008-20675-1-git-send-email-galak@codeaurora.org> Cc: devicetree@vger.kernel.org, b.zolnierkie@samsung.com, linux-arm-msm@vger.kernel.org, sboyd@codeaurora.org, linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, Kumar Gala <galak@codeaurora.org>, linux-arm-kernel@lists.infradead.org Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 16a2f06..b7b6bce 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -178,4 +178,11 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. +config PHY_QCOM_IPQ806X_SATA + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index b4f1d57..d950317 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -20,3 +20,4 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/phy-qcom-ipq806x-sata.c new file mode 100644 index 0000000..0716aa2 --- /dev/null +++ b/drivers/phy/phy-qcom-ipq806x-sata.c @@ -0,0 +1,206 @@ +/* + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/time.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> + +struct qcom_ipq806x_sata_phy { + void __iomem *mmio; + struct clk *cfg_clk; +}; + +#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) + +#define SATA_PHY_P0_PARAM0 0x200 +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0) + +#define SATA_PHY_P0_PARAM1 0x204 +#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0) + +#define SATA_PHY_P0_PARAM2 0x208 +#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18) +#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18) + +#define SATA_PHY_P0_PARAM3 0x20C +#define SATA_PHY_SSC_EN 0x8 +#define SATA_PHY_P0_PARAM4 0x210 +#define SATA_PHY_REF_SSP_EN 0x2 +#define SATA_PHY_RESET 0x1 + +static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy) +{ + struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); + u32 reg; + + /* Setting SSC_EN to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3); + reg = reg | SATA_PHY_SSC_EN; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3); + + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) & + ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK | + SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK | + SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK); + reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf); + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0); + + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) & + ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK); + reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55); + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1); + + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) & + ~SATA_PHY_P0_PARAM2_RX_EQ_MASK; + reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3); + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2); + + /* Setting PHY_RESET to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg | SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + /* Setting REF_SSP_EN to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + mb(); + /* sleep for max. 50us more to combine processor wakeups */ + usleep_range(20, 20 + 50); + + /* Clearing PHY_RESET to 0 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg & ~SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + return 0; +} + +static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy) +{ + struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); + u32 reg; + + /* Setting PHY_RESET to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg | SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + return 0; +} + +static struct phy_ops qcom_ipq806x_sata_phy_ops = { + .init = qcom_ipq806x_sata_phy_init, + .exit = qcom_ipq806x_sata_phy_exit, + .owner = THIS_MODULE, +}; + +static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev) +{ + struct qcom_ipq806x_sata_phy *phy; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + struct phy *generic_phy; + int ret; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(dev, "%s: failed to allocate phy\n", __func__); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->mmio)) + return PTR_ERR(phy->mmio); + + generic_phy = devm_phy_create(dev, &qcom_ipq806x_sata_phy_ops, NULL); + if (IS_ERR(generic_phy)) { + dev_err(dev, "%s: failed to create phy\n", __func__); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, phy); + + phy->cfg_clk = devm_clk_get(dev, "cfg"); + if (IS_ERR(phy->cfg_clk)) { + dev_err(dev, "Failed to get sata cfg clock\n"); + return PTR_ERR(phy->cfg_clk); + } + + ret = clk_prepare_enable(phy->cfg_clk); + if (ret) + return ret; + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + clk_disable_unprepare(phy->cfg_clk); + dev_err(dev, "%s: failed to register phy\n", __func__); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev) +{ + struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev); + + clk_disable_unprepare(phy->cfg_clk); + + return 0; +} + +static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = { + { .compatible = "qcom,ipq806x-sata-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match); + +static struct platform_driver qcom_ipq806x_sata_phy_driver = { + .probe = qcom_ipq806x_sata_phy_probe, + .remove = qcom_ipq806x_sata_phy_remove, + .driver = { + .name = "qcom-ipq806x-sata-phy", + .owner = THIS_MODULE, + .of_match_table = qcom_ipq806x_sata_phy_of_match, + } +}; +module_platform_driver(qcom_ipq806x_sata_phy_driver); + +MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver"); +MODULE_LICENSE("GPL v2");

[v5,1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY

Commit Message

Comments

Patch