Message ID | 1406528334-4415-2-git-send-email-j-keerthy@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Monday 28 July 2014 11:48 AM, Keerthy wrote: > From: Keerthy J <j-keerthy@ti.com> > > I2C1 bus is used for the following peripherals > P8 connector (MLB) > TLV320AIC3106 Audio codec > J15 LCD header > 24WC256 eeprom > TMP102AIDRLT temperature sensor > PCF8575 GPIO expander > PCA9306 i2c voltage translator -> Goes to P9 for comm interface > P2 expansion connector > TPS65917 PMIC > > The slowest speed of all the peripherals seems to be 400KHz. Correcting the 'to' list. > > Tested-by: Lokesh Vutla <lokeshvutla@ti.com> > Signed-off-by: Nishanth Menon <nm@ti.com> > Signed-off-by: Keerthy <j-keerthy@ti.com> > --- > arch/arm/boot/dts/dra72-evm.dts | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts > index 5147023..1e12862 100644 > --- a/arch/arm/boot/dts/dra72-evm.dts > +++ b/arch/arm/boot/dts/dra72-evm.dts > @@ -19,6 +19,22 @@ > }; > }; > > +&dra7_pmx_core { > + i2c1_pins: pinmux_i2c1_pins { > + pinctrl-single,pins = < > + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ > + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ > + >; > + }; > +}; > + > +&i2c1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins>; > + clock-frequency = <400000>; > +}; > + > &uart1 { > status = "okay"; > }; -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 5147023..1e12862 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -19,6 +19,22 @@ }; }; +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; +}; + &uart1 { status = "okay"; };