| Message ID | 53DB7EBA.3080004@renesas.com (mailing list archive) |
|---|---|
| State | Awaiting Upstream |
| Headers | show |
Hello. On 08/01/2014 03:49 PM, Yoshihiro Shimoda wrote: > Document the device tree bindings for the Renesas USBHS controller. > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > --- > .../devicetree/bindings/usb/renesas_usbhs.txt | 24 ++++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/renesas_usbhs.txt > diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt > new file mode 100644 > index 0000000..e9faa65 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt > @@ -0,0 +1,24 @@ > +Renesas Electronics USBHS driver > + > +Required properties: > + - compatible: Must contain one of the following: > + - "renesas,usbhs-r8a7790" > + - "renesas,usbhs-r8a7791" > + - reg: Base address and length of the register for the USBHS > + - interrupts: Interrupt specifier for the USBHS > + - clocks: A list of phandle + clock specifier pairs > + > +Optional properties: > + - buswait_bwait: Integer to use BUSWAIT register Should be named "renesas,buswait-bwait" or probably just "renesas,buswait". > + - enable-gpio: A gpio specifier to check GPIO determining if USB function Should also be prefixed with "renesas,". [...] WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, (2014/08/01 22:35), Sergei Shtylyov wrote: > Hello. > > On 08/01/2014 03:49 PM, Yoshihiro Shimoda wrote: > >> Document the device tree bindings for the Renesas USBHS controller. > >> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> >> --- >> .../devicetree/bindings/usb/renesas_usbhs.txt | 24 ++++++++++++++++++++ >> 1 file changed, 24 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/usb/renesas_usbhs.txt > >> diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt >> new file mode 100644 >> index 0000000..e9faa65 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt >> @@ -0,0 +1,24 @@ >> +Renesas Electronics USBHS driver >> + >> +Required properties: >> + - compatible: Must contain one of the following: >> + - "renesas,usbhs-r8a7790" >> + - "renesas,usbhs-r8a7791" >> + - reg: Base address and length of the register for the USBHS >> + - interrupts: Interrupt specifier for the USBHS >> + - clocks: A list of phandle + clock specifier pairs >> + >> +Optional properties: >> + - buswait_bwait: Integer to use BUSWAIT register > > Should be named "renesas,buswait-bwait" or probably just "renesas,buswait". Thank you for the point. I will fix this name to "renesas,buswait". >> + - enable-gpio: A gpio specifier to check GPIO determining if USB function > > Should also be prefixed with "renesas,". I will fix this name to "renesas,enable-gpio". Best regards, Yoshihiro Shimoda > [...] > > WBR, Sergei > -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt new file mode 100644 index 0000000..e9faa65 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -0,0 +1,24 @@ +Renesas Electronics USBHS driver + +Required properties: + - compatible: Must contain one of the following: + - "renesas,usbhs-r8a7790" + - "renesas,usbhs-r8a7791" + - reg: Base address and length of the register for the USBHS + - interrupts: Interrupt specifier for the USBHS + - clocks: A list of phandle + clock specifier pairs + +Optional properties: + - buswait_bwait: Integer to use BUSWAIT register + - enable-gpio: A gpio specifier to check GPIO determining if USB function + should be enabled + - phys: phandle + phy specifier pair + - phy-names: must be "usb" + +Example: + usbhs: usb@e6590000 { + compatible = "renesas,usbhs-r8a7790"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; + };
Document the device tree bindings for the Renesas USBHS controller. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- .../devicetree/bindings/usb/renesas_usbhs.txt | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/renesas_usbhs.txt