| Message ID | 1406250448-470-5-git-send-email-skannan@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 25 July 2014 06:37, Saravana Kannan <skannan@codeaurora.org> wrote: > When CPUs are physically added/removed, its cpuX sysfs directory is > dynamically added/removed. To handle this correctly, the cpufreq sysfs > nodes also need to be added/removed dynamically. Hmm, in that case why should we take this thread? I mean, if we do need to add/remove sysfs links or move kobjects around, what would we achieve with this patchset? > Signed-off-by: Saravana Kannan <skannan@codeaurora.org> > --- > drivers/cpufreq/cpufreq.c | 46 +++++++++++++++++++++++++++++++++------------- > 1 file changed, 33 insertions(+), 13 deletions(-) > > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c > index d9fc6e5..97edf05 100644 > --- a/drivers/cpufreq/cpufreq.c > +++ b/drivers/cpufreq/cpufreq.c > @@ -41,6 +41,7 @@ static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data_fallback); > static DEFINE_RWLOCK(cpufreq_driver_lock); > DEFINE_MUTEX(cpufreq_governor_lock); > static LIST_HEAD(cpufreq_policy_list); > +static cpumask_t has_symlink; > > /* This one keeps track of the previously set governor of a removed CPU */ > static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); > @@ -865,7 +866,10 @@ static int cpufreq_add_dev_symlink(struct cpufreq_policy *policy) > unsigned int j; > int ret = 0; > > - for_each_cpu(j, policy->related_cpus) { > + /* Only some of the related CPUs might be present. So, create > + * symlinks only for those. > + */ Proper styles please. > + for_each_cpu_and(j, policy->related_cpus, cpu_present_mask) { > struct device *cpu_dev; > > if (j == policy->kobj_cpu) > @@ -877,6 +881,7 @@ static int cpufreq_add_dev_symlink(struct cpufreq_policy *policy) > "cpufreq"); > if (ret) > break; > + cpumask_set_cpu(j, &has_symlink); > } > return ret; > } > @@ -1101,9 +1106,6 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) > unsigned long flags; > bool recover_policy = cpufreq_suspended; > > - if (cpu_is_offline(cpu)) > - return 0; > - Why? > pr_debug("adding CPU %u\n", cpu); > > #ifdef CONFIG_SMP > @@ -1111,7 +1113,19 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) > * CPU because it is in the same boat. */ > policy = cpufreq_cpu_get(cpu); > if (policy) { > - if (!cpumask_test_cpu(cpu, policy->cpus)) > + /* If a CPU gets physically plugged in after one or more of > + * its related CPUs are ONLINE, we need to create a symlink > + * for it since it wouldn't have been created when the policy > + * was initialized. Do this as soon as it's plugged in. > + */ > + if (sif && !cpumask_test_cpu(cpu, &has_symlink)) { Why check for sif? > + ret = sysfs_create_link(&dev->kobj, &policy->kobj, > + "cpufreq"); > + if (!ret) > + cpumask_set_cpu(cpu, &has_symlink); > + } > + Move all this to cpufreq_add_policy_cpu().. > + if (!cpumask_test_cpu(cpu, policy->cpus) && cpu_online(cpu)) > ret = cpufreq_add_policy_cpu(policy, cpu, dev); > else > ret = 0; > @@ -1120,6 +1134,9 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) > } > #endif > > + if (cpu_is_offline(cpu)) > + return 0; > + Don't know why we moved it here.. cpufreq_add_dev will only be called for online CPUs.. > if (!down_read_trylock(&cpufreq_rwsem)) > return 0; > > @@ -1303,25 +1320,24 @@ static int cpufreq_nominate_new_policy_cpu(struct cpufreq_policy *policy, > unsigned int old_cpu) > { > struct device *cpu_dev; > + unsigned int new_cpu; > int ret; > > /* first sibling now owns the new sysfs dir */ > - cpu_dev = get_cpu_device(cpumask_any_but(policy->cpus, old_cpu)); > + for_each_cpu_and(new_cpu, policy->related_cpus, cpu_present_mask) > + if (new_cpu != old_cpu) > + break; > + cpu_dev = get_cpu_device(new_cpu); > > sysfs_remove_link(&cpu_dev->kobj, "cpufreq"); > ret = kobject_move(&policy->kobj, &cpu_dev->kobj); > if (ret) { > pr_err("%s: Failed to move kobj: %d\n", __func__, ret); > - > - down_write(&policy->rwsem); > - cpumask_set_cpu(old_cpu, policy->cpus); > - up_write(&policy->rwsem); > - > ret = sysfs_create_link(&cpu_dev->kobj, &policy->kobj, > "cpufreq"); > - > return -EINVAL; > } > + cpumask_clear_cpu(new_cpu, &has_symlink); > policy->kobj_cpu = cpu_dev->id; > > return cpu_dev->id; > @@ -1407,8 +1423,12 @@ static int __cpufreq_remove_dev_finish(struct device *dev, > cpus = cpumask_weight(policy->cpus); > up_read(&policy->rwsem); > > - if (cpu != policy->kobj_cpu) > + if (cpu != policy->kobj_cpu) { > sysfs_remove_link(&dev->kobj, "cpufreq"); > + cpumask_clear_cpu(cpu, &has_symlink); > + } else { > + cpufreq_nominate_new_policy_cpu(policy, cpu); > + } This has_symlink thing has made it much more complicated.. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/07/2014 04:02 AM, Viresh Kumar wrote: > On 25 July 2014 06:37, Saravana Kannan <skannan@codeaurora.org> wrote: >> When CPUs are physically added/removed, its cpuX sysfs directory is >> dynamically added/removed. To handle this correctly, the cpufreq sysfs >> nodes also need to be added/removed dynamically. > > Hmm, in that case why should we take this thread? I mean, if we do need > to add/remove sysfs links or move kobjects around, what would we achieve > with this patchset? For the reasons mentioned in 3/5. * Faster suspend/resume * Faster hotplug * Sysfs file permissions maintained across hotplug * Policy settings and governor tunables maintained across hotplug * Cpufreq stats would be maintained across hotplug for all CPUs and can be queried even after CPU goes OFFLINE Also, logical hotplug happens way more often than physical hot-remove. Just because we need to do this during physical hot-remove doesn't mean we should do this all the time. Btw, v5 will have another patch that should allow a lot of code reuse that won't be easy with symlink manipulation. > >> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> >> --- >> drivers/cpufreq/cpufreq.c | 46 +++++++++++++++++++++++++++++++++------------- >> 1 file changed, 33 insertions(+), 13 deletions(-) >> >> diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c >> index d9fc6e5..97edf05 100644 >> --- a/drivers/cpufreq/cpufreq.c >> +++ b/drivers/cpufreq/cpufreq.c >> @@ -41,6 +41,7 @@ static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data_fallback); >> static DEFINE_RWLOCK(cpufreq_driver_lock); >> DEFINE_MUTEX(cpufreq_governor_lock); >> static LIST_HEAD(cpufreq_policy_list); >> +static cpumask_t has_symlink; >> >> /* This one keeps track of the previously set governor of a removed CPU */ >> static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); >> @@ -865,7 +866,10 @@ static int cpufreq_add_dev_symlink(struct cpufreq_policy *policy) >> unsigned int j; >> int ret = 0; >> >> - for_each_cpu(j, policy->related_cpus) { >> + /* Only some of the related CPUs might be present. So, create >> + * symlinks only for those. >> + */ > > Proper styles please. > >> + for_each_cpu_and(j, policy->related_cpus, cpu_present_mask) { >> struct device *cpu_dev; >> >> if (j == policy->kobj_cpu) >> @@ -877,6 +881,7 @@ static int cpufreq_add_dev_symlink(struct cpufreq_policy *policy) >> "cpufreq"); >> if (ret) >> break; >> + cpumask_set_cpu(j, &has_symlink); >> } >> return ret; >> } >> @@ -1101,9 +1106,6 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) >> unsigned long flags; >> bool recover_policy = cpufreq_suspended; >> >> - if (cpu_is_offline(cpu)) >> - return 0; >> - > > Why? So that when a CPU is physically hot-added again, we create the symlinks again. > >> pr_debug("adding CPU %u\n", cpu); >> >> #ifdef CONFIG_SMP >> @@ -1111,7 +1113,19 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) >> * CPU because it is in the same boat. */ >> policy = cpufreq_cpu_get(cpu); >> if (policy) { >> - if (!cpumask_test_cpu(cpu, policy->cpus)) >> + /* If a CPU gets physically plugged in after one or more of >> + * its related CPUs are ONLINE, we need to create a symlink >> + * for it since it wouldn't have been created when the policy >> + * was initialized. Do this as soon as it's plugged in. >> + */ >> + if (sif && !cpumask_test_cpu(cpu, &has_symlink)) { > > Why check for sif? sif is only set when this is called from hot-add/hot-remove context or cpufreq is registered for the first time. > >> + ret = sysfs_create_link(&dev->kobj, &policy->kobj, >> + "cpufreq"); >> + if (!ret) >> + cpumask_set_cpu(cpu, &has_symlink); >> + } >> + > > Move all this to cpufreq_add_policy_cpu().. The code above is not for online CPUs. So, this can't be added to cpufreq_add_policy_cpu(). > >> + if (!cpumask_test_cpu(cpu, policy->cpus) && cpu_online(cpu)) >> ret = cpufreq_add_policy_cpu(policy, cpu, dev); >> else >> ret = 0; >> @@ -1120,6 +1134,9 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) >> } >> #endif >> >> + if (cpu_is_offline(cpu)) >> + return 0; >> + > > Don't know why we moved it here.. cpufreq_add_dev will only be called for > online CPUs.. As you said, I just moved it down here. If what you say was true, we wouldn't have needed this in the first place. It's needed because __cpufreq_add_dev() is also called for a present, but offline CPU during cpufreq driver register. > >> if (!down_read_trylock(&cpufreq_rwsem)) >> return 0; >> >> @@ -1303,25 +1320,24 @@ static int cpufreq_nominate_new_policy_cpu(struct cpufreq_policy *policy, >> unsigned int old_cpu) >> { >> struct device *cpu_dev; >> + unsigned int new_cpu; >> int ret; >> >> /* first sibling now owns the new sysfs dir */ >> - cpu_dev = get_cpu_device(cpumask_any_but(policy->cpus, old_cpu)); >> + for_each_cpu_and(new_cpu, policy->related_cpus, cpu_present_mask) >> + if (new_cpu != old_cpu) >> + break; >> + cpu_dev = get_cpu_device(new_cpu); >> >> sysfs_remove_link(&cpu_dev->kobj, "cpufreq"); >> ret = kobject_move(&policy->kobj, &cpu_dev->kobj); >> if (ret) { >> pr_err("%s: Failed to move kobj: %d\n", __func__, ret); >> - >> - down_write(&policy->rwsem); >> - cpumask_set_cpu(old_cpu, policy->cpus); >> - up_write(&policy->rwsem); >> - >> ret = sysfs_create_link(&cpu_dev->kobj, &policy->kobj, >> "cpufreq"); >> - >> return -EINVAL; >> } >> + cpumask_clear_cpu(new_cpu, &has_symlink); >> policy->kobj_cpu = cpu_dev->id; >> >> return cpu_dev->id; >> @@ -1407,8 +1423,12 @@ static int __cpufreq_remove_dev_finish(struct device *dev, >> cpus = cpumask_weight(policy->cpus); >> up_read(&policy->rwsem); >> >> - if (cpu != policy->kobj_cpu) >> + if (cpu != policy->kobj_cpu) { >> sysfs_remove_link(&dev->kobj, "cpufreq"); >> + cpumask_clear_cpu(cpu, &has_symlink); >> + } else { >> + cpufreq_nominate_new_policy_cpu(policy, cpu); >> + } > > This has_symlink thing has made it much more complicated.. Actually, I disagree. No, convoluted deduction of what condition this is getting called under, etc. It's pretty simple -- if symlink is present, the bit is set; else, it's not set. Btw, I could have make this similar to policy->related_cpus and policy->cpus and it might have looked "simpler". But no point in having multiple cpumasks when we are just tracking the global presence of symlinks. Also, whether it's convoluted or not, it's definitely an improvement over removing and adding these all the time. -Saravana
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index d9fc6e5..97edf05 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -41,6 +41,7 @@ static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data_fallback); static DEFINE_RWLOCK(cpufreq_driver_lock); DEFINE_MUTEX(cpufreq_governor_lock); static LIST_HEAD(cpufreq_policy_list); +static cpumask_t has_symlink; /* This one keeps track of the previously set governor of a removed CPU */ static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); @@ -865,7 +866,10 @@ static int cpufreq_add_dev_symlink(struct cpufreq_policy *policy) unsigned int j; int ret = 0; - for_each_cpu(j, policy->related_cpus) { + /* Only some of the related CPUs might be present. So, create + * symlinks only for those. + */ + for_each_cpu_and(j, policy->related_cpus, cpu_present_mask) { struct device *cpu_dev; if (j == policy->kobj_cpu) @@ -877,6 +881,7 @@ static int cpufreq_add_dev_symlink(struct cpufreq_policy *policy) "cpufreq"); if (ret) break; + cpumask_set_cpu(j, &has_symlink); } return ret; } @@ -1101,9 +1106,6 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) unsigned long flags; bool recover_policy = cpufreq_suspended; - if (cpu_is_offline(cpu)) - return 0; - pr_debug("adding CPU %u\n", cpu); #ifdef CONFIG_SMP @@ -1111,7 +1113,19 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) * CPU because it is in the same boat. */ policy = cpufreq_cpu_get(cpu); if (policy) { - if (!cpumask_test_cpu(cpu, policy->cpus)) + /* If a CPU gets physically plugged in after one or more of + * its related CPUs are ONLINE, we need to create a symlink + * for it since it wouldn't have been created when the policy + * was initialized. Do this as soon as it's plugged in. + */ + if (sif && !cpumask_test_cpu(cpu, &has_symlink)) { + ret = sysfs_create_link(&dev->kobj, &policy->kobj, + "cpufreq"); + if (!ret) + cpumask_set_cpu(cpu, &has_symlink); + } + + if (!cpumask_test_cpu(cpu, policy->cpus) && cpu_online(cpu)) ret = cpufreq_add_policy_cpu(policy, cpu, dev); else ret = 0; @@ -1120,6 +1134,9 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) } #endif + if (cpu_is_offline(cpu)) + return 0; + if (!down_read_trylock(&cpufreq_rwsem)) return 0; @@ -1303,25 +1320,24 @@ static int cpufreq_nominate_new_policy_cpu(struct cpufreq_policy *policy, unsigned int old_cpu) { struct device *cpu_dev; + unsigned int new_cpu; int ret; /* first sibling now owns the new sysfs dir */ - cpu_dev = get_cpu_device(cpumask_any_but(policy->cpus, old_cpu)); + for_each_cpu_and(new_cpu, policy->related_cpus, cpu_present_mask) + if (new_cpu != old_cpu) + break; + cpu_dev = get_cpu_device(new_cpu); sysfs_remove_link(&cpu_dev->kobj, "cpufreq"); ret = kobject_move(&policy->kobj, &cpu_dev->kobj); if (ret) { pr_err("%s: Failed to move kobj: %d\n", __func__, ret); - - down_write(&policy->rwsem); - cpumask_set_cpu(old_cpu, policy->cpus); - up_write(&policy->rwsem); - ret = sysfs_create_link(&cpu_dev->kobj, &policy->kobj, "cpufreq"); - return -EINVAL; } + cpumask_clear_cpu(new_cpu, &has_symlink); policy->kobj_cpu = cpu_dev->id; return cpu_dev->id; @@ -1407,8 +1423,12 @@ static int __cpufreq_remove_dev_finish(struct device *dev, cpus = cpumask_weight(policy->cpus); up_read(&policy->rwsem); - if (cpu != policy->kobj_cpu) + if (cpu != policy->kobj_cpu) { sysfs_remove_link(&dev->kobj, "cpufreq"); + cpumask_clear_cpu(cpu, &has_symlink); + } else { + cpufreq_nominate_new_policy_cpu(policy, cpu); + } /* If cpu is last user of policy, free policy */ if (cpus == 0) {
When CPUs are physically added/removed, its cpuX sysfs directory is dynamically added/removed. To handle this correctly, the cpufreq sysfs nodes also need to be added/removed dynamically. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> --- drivers/cpufreq/cpufreq.c | 46 +++++++++++++++++++++++++++++++++------------- 1 file changed, 33 insertions(+), 13 deletions(-)