mbox series

[v3,0/2] ASoC: codecs: add support for everest-semi es8311 codec

Message ID 20240522164722.954656-1-matteomartelli3@gmail.com (mailing list archive)
Headers show
Series ASoC: codecs: add support for everest-semi es8311 codec | expand

Message

Matteo Martelli May 22, 2024, 4:46 p.m. UTC 
This patch set adds support for the Everest-semi ES8311 codec.

Everest-semi ES8311 codec is a low-power mono audio codec with I2S audio
interface and I2C control.

Implemented and tested most of the codec features, with few limitations
listed in the driver commit message. The test setup was composed of a
ESP32-LyraT-Mini board, which embeds the codec, connected via I2C and
I2S to a Raspberry Pi Zero W host board. Some tests were also performed
on a Pine64 A64 host board (e.g. to test the suspend/resume not
supported by the rpi). The codec driver was bound with the simple-card
driver running on kernel v6.9-rc7.
---
Changes in v3:
- Rebased on for-next of broonie/sound.git
- Link to v2: https://lore.kernel.org/all/20240516154800.125284-1-matteomartelli3@gmail.com/
Changes in v2:
- dt-bindings: removed wrong es8311 schema file
- dt-bindings: added es8311 into existing es8316 schema file
- Link to v1: https://lore.kernel.org/all/20240510131238.1319333-1-matteomartelli3@gmail.com/
---
Matteo Martelli (2):
  ASoC: es8311: dt-bindings: add everest es8311 codec
  ASoC: codecs: es8311: add everest es8311 codec support

 .../bindings/sound/everest,es8316.yaml        |   7 +-
 sound/soc/codecs/Kconfig                      |   4 +
 sound/soc/codecs/Makefile                     |   2 +
 sound/soc/codecs/es8311.c                     | 970 ++++++++++++++++++
 sound/soc/codecs/es8311.h                     | 162 +++
 5 files changed, 1143 insertions(+), 2 deletions(-)
 create mode 100644 sound/soc/codecs/es8311.c
 create mode 100644 sound/soc/codecs/es8311.h
---
base-commit: 47d09270d7776e46858a161f94b735640b2fb056
--

Comments

Matteo Martelli June 6, 2024, 2:31 p.m. UTC | #1 
Matteo Martelli wrote:
> This patch set adds support for the Everest-semi ES8311 codec.
> 
> Everest-semi ES8311 codec is a low-power mono audio codec with I2S audio
> interface and I2C control.

Hello Mark,
I've just noticed that this patch series has been applied to asoc/for-next and
linux-next/master but I hadn't receive any "applied" reply mail. Is this
expected? Just wondering if I missed anything in the process.

Thanks,
Matteo Martelli