diff mbox

ASoC: snappercl15: Convert to table based DAPM setup

Message ID 1393830635-17279-1-git-send-email-lars@metafoo.de (mailing list archive)
State New, archived
Delegated to: Mark Brown
Headers show

Commit Message

Lars-Peter Clausen March 3, 2014, 7:10 a.m. UTC 
Use table based setup to register the DAPM widgets and routes.  This on one hand
makes the code a bit shorter and cleaner and on the other hand the board level
DAPM elements get registered in the card's DAPM context rather than in the
CODEC's DAPM context.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 sound/soc/cirrus/snappercl15.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

Comments

Lars-Peter Clausen March 3, 2014, 7:13 a.m. UTC | #1 
Cc: Ryan's new e-mail address

On 03/03/2014 08:10 AM, Lars-Peter Clausen wrote:
> Use table based setup to register the DAPM widgets and routes.  This on one hand
> makes the code a bit shorter and cleaner and on the other hand the board level
> DAPM elements get registered in the card's DAPM context rather than in the
> CODEC's DAPM context.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
>   sound/soc/cirrus/snappercl15.c | 18 +++++-------------
>   1 file changed, 5 insertions(+), 13 deletions(-)
>
> diff --git a/sound/soc/cirrus/snappercl15.c b/sound/soc/cirrus/snappercl15.c
> index 29238a7..bdc88e5 100644
> --- a/sound/soc/cirrus/snappercl15.c
> +++ b/sound/soc/cirrus/snappercl15.c
> @@ -65,18 +65,6 @@ static const struct snd_soc_dapm_route audio_map[] = {
>   	{"MICIN", NULL, "Mic Jack"},
>   };
>
> -static int snappercl15_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd)
> -{
> -	struct snd_soc_codec *codec = rtd->codec;
> -	struct snd_soc_dapm_context *dapm = &codec->dapm;
> -
> -	snd_soc_dapm_new_controls(dapm, tlv320aic23_dapm_widgets,
> -				  ARRAY_SIZE(tlv320aic23_dapm_widgets));
> -
> -	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
> -	return 0;
> -}
> -
>   static struct snd_soc_dai_link snappercl15_dai = {
>   	.name		= "tlv320aic23",
>   	.stream_name	= "AIC23",
> @@ -84,7 +72,6 @@ static struct snd_soc_dai_link snappercl15_dai = {
>   	.codec_dai_name	= "tlv320aic23-hifi",
>   	.codec_name	= "tlv320aic23-codec.0-001a",
>   	.platform_name	= "ep93xx-i2s",
> -	.init		= snappercl15_tlv320aic23_init,
>   	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF |
>   			  SND_SOC_DAIFMT_CBS_CFS,
>   	.ops		= &snappercl15_ops,
> @@ -95,6 +82,11 @@ static struct snd_soc_card snd_soc_snappercl15 = {
>   	.owner		= THIS_MODULE,
>   	.dai_link	= &snappercl15_dai,
>   	.num_links	= 1,
> +
> +	.dapm_widgets = tlv320aic23_dapm_widgets,
> +	.num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets),
> +	.dapm_routes = audio_map,
> +	.num_dapm_routes = ARRAY_SIZE(audio_map),
>   };
>
>   static int snappercl15_probe(struct platform_device *pdev)
>
Ryan Mallon March 3, 2014, 9:43 p.m. UTC | #2 
On 03/03/14 18:13, Lars-Peter Clausen wrote:
> Cc: Ryan's new e-mail address
> 
> On 03/03/2014 08:10 AM, Lars-Peter Clausen wrote:
>> Use table based setup to register the DAPM widgets and routes.  This
>> on one hand
>> makes the code a bit shorter and cleaner and on the other hand the
>> board level
>> DAPM elements get registered in the card's DAPM context rather than in
>> the
>> CODEC's DAPM context.
>>
>> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
>> ---
>>   sound/soc/cirrus/snappercl15.c | 18 +++++-------------
>>   1 file changed, 5 insertions(+), 13 deletions(-)
>>
>> diff --git a/sound/soc/cirrus/snappercl15.c
>> b/sound/soc/cirrus/snappercl15.c
>> index 29238a7..bdc88e5 100644
>> --- a/sound/soc/cirrus/snappercl15.c
>> +++ b/sound/soc/cirrus/snappercl15.c
>> @@ -65,18 +65,6 @@ static const struct snd_soc_dapm_route audio_map[] = {
>>       {"MICIN", NULL, "Mic Jack"},
>>   };
>>
>> -static int snappercl15_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd)
>> -{
>> -    struct snd_soc_codec *codec = rtd->codec;
>> -    struct snd_soc_dapm_context *dapm = &codec->dapm;
>> -
>> -    snd_soc_dapm_new_controls(dapm, tlv320aic23_dapm_widgets,
>> -                  ARRAY_SIZE(tlv320aic23_dapm_widgets));
>> -
>> -    snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
>> -    return 0;
>> -}
>> -
>>   static struct snd_soc_dai_link snappercl15_dai = {
>>       .name        = "tlv320aic23",
>>       .stream_name    = "AIC23",
>> @@ -84,7 +72,6 @@ static struct snd_soc_dai_link snappercl15_dai = {
>>       .codec_dai_name    = "tlv320aic23-hifi",
>>       .codec_name    = "tlv320aic23-codec.0-001a",
>>       .platform_name    = "ep93xx-i2s",
>> -    .init        = snappercl15_tlv320aic23_init,
>>       .dai_fmt    = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF |
>>                 SND_SOC_DAIFMT_CBS_CFS,
>>       .ops        = &snappercl15_ops,
>> @@ -95,6 +82,11 @@ static struct snd_soc_card snd_soc_snappercl15 = {
>>       .owner        = THIS_MODULE,
>>       .dai_link    = &snappercl15_dai,
>>       .num_links    = 1,
>> +
>> +    .dapm_widgets = tlv320aic23_dapm_widgets,
>> +    .num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets),
>> +    .dapm_routes = audio_map,
>> +    .num_dapm_routes = ARRAY_SIZE(audio_map),

One really minor nit. The rest of this file has tab aligned structure
initialisers. Can we keep this consistent please.

~Ryan
diff mbox

Patch

diff --git a/sound/soc/cirrus/snappercl15.c b/sound/soc/cirrus/snappercl15.c
index 29238a7..bdc88e5 100644
--- a/sound/soc/cirrus/snappercl15.c
+++ b/sound/soc/cirrus/snappercl15.c
@@ -65,18 +65,6 @@  static const struct snd_soc_dapm_route audio_map[] = {
 	{"MICIN", NULL, "Mic Jack"},
 };
 
-static int snappercl15_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
-
-	snd_soc_dapm_new_controls(dapm, tlv320aic23_dapm_widgets,
-				  ARRAY_SIZE(tlv320aic23_dapm_widgets));
-
-	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-	return 0;
-}
-
 static struct snd_soc_dai_link snappercl15_dai = {
 	.name		= "tlv320aic23",
 	.stream_name	= "AIC23",
@@ -84,7 +72,6 @@  static struct snd_soc_dai_link snappercl15_dai = {
 	.codec_dai_name	= "tlv320aic23-hifi",
 	.codec_name	= "tlv320aic23-codec.0-001a",
 	.platform_name	= "ep93xx-i2s",
-	.init		= snappercl15_tlv320aic23_init,
 	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF |
 			  SND_SOC_DAIFMT_CBS_CFS,
 	.ops		= &snappercl15_ops,
@@ -95,6 +82,11 @@  static struct snd_soc_card snd_soc_snappercl15 = {
 	.owner		= THIS_MODULE,
 	.dai_link	= &snappercl15_dai,
 	.num_links	= 1,
+
+	.dapm_widgets = tlv320aic23_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets),
+	.dapm_routes = audio_map,
+	.num_dapm_routes = ARRAY_SIZE(audio_map),
 };
 
 static int snappercl15_probe(struct platform_device *pdev)