@@ -1545,6 +1545,12 @@ static int arizona_validate_fll(struct arizona_fll *fll,
{
unsigned int Fvco_min;
+ if (fll->fout && Fout != fll->fout) {
+ arizona_fll_err(fll,
+ "Can't change output on active FLL\n");
+ return -EINVAL;
+ }
+
if (Fref / ARIZONA_FLL_MAX_REFDIV > ARIZONA_FLL_MAX_FREF) {
arizona_fll_err(fll,
"Can't scale %dMHz in to <=13.5MHz\n",
@@ -1788,6 +1794,15 @@ static int arizona_enable_fll(struct arizona_fll *fll)
if (already_enabled < 0)
return already_enabled;
+ if (already_enabled) {
+ /* Facilitate smooth refclk across the transition */
+ regmap_update_bits_async(fll->arizona->regmap, fll->base + 0x7,
+ ARIZONA_FLL1_GAIN_MASK, 0);
+ regmap_update_bits_async(fll->arizona->regmap, fll->base + 1,
+ ARIZONA_FLL1_FREERUN,
+ ARIZONA_FLL1_FREERUN);
+ }
+
/*
* If we have both REFCLK and SYNCCLK then enable both,
* otherwise apply the SYNCCLK settings to REFCLK.
@@ -1843,6 +1858,10 @@ static int arizona_enable_fll(struct arizona_fll *fll)
ARIZONA_FLL1_SYNC_ENA,
ARIZONA_FLL1_SYNC_ENA);
+ if (already_enabled)
+ regmap_update_bits_async(arizona->regmap, fll->base + 1,
+ ARIZONA_FLL1_FREERUN, 0);
+
ret = wait_for_completion_timeout(&fll->ok,
msecs_to_jiffies(250));
if (ret == 0)
Currently, the driver places no restrictions on changes that can be applied to an active FLL. However, it is only possible to change the input for an active FLL, to change the output the FLL should be stopped and then recofigured. This patch disallows changes in output frequency and adds some additional handling to ensure the output remains consistent across an input transition. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> --- sound/soc/codecs/arizona.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-)