@@ -18,9 +18,8 @@ Required properties:
- pinctrl-names: Must contain a "default" entry.
- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
See ../pinctrl/pinctrl-bindings.txt for details of the property values.
-- big-endian-regs: If this property is absent, the little endian mode will
- be in use as default, or the big endian mode will be in use for all the
- device registers.
+- big-endian: Boolean property, required if all the SAI device registers
+ are big-endian rather than little-endian.
- big-endian-data: If this property is absent, the little endian mode will
be in use as default, or the big endian mode will be in use for all the
fifo data.
@@ -53,6 +52,6 @@ sai2: sai@40031000 {
dma-names = "tx", "rx";
dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
<&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
- big-endian-regs;
+ big-endian;
big-endian-data;
};
@@ -544,7 +544,7 @@ static bool fsl_sai_writeable_reg(struct device *dev, unsigned int reg)
}
}
-static struct regmap_config fsl_sai_regmap_config = {
+static const struct regmap_config fsl_sai_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
@@ -573,10 +573,6 @@ static int fsl_sai_probe(struct platform_device *pdev)
if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx6sx-sai"))
sai->sai_on_imx = true;
- sai->big_endian_regs = of_property_read_bool(np, "big-endian-regs");
- if (sai->big_endian_regs)
- fsl_sai_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
-
sai->big_endian_data = of_property_read_bool(np, "big-endian-data");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -132,7 +132,6 @@ struct fsl_sai {
struct clk *bus_clk;
struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
- bool big_endian_regs;
bool big_endian_data;
bool is_dsp_mode;
bool sai_on_imx;
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- Documentation/devicetree/bindings/sound/fsl-sai.txt | 7 +++---- sound/soc/fsl/fsl_sai.c | 6 +----- sound/soc/fsl/fsl_sai.h | 1 - 3 files changed, 4 insertions(+), 10 deletions(-)