@@ -27,6 +27,10 @@ Optional properties:
Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential,
rather than single-ended.
+- realtek,pdm_clk_div
+ Select 0/1/2/3 as PDM clock divider 1/2/4/3 respectively.
+ PDM clock = system clock / PDM clock divider
+
- realtek,gpio-config
Array of six 8bit elements that configures GPIO.
0 - floating (reset value)
@@ -71,6 +75,7 @@ rt5677 {
realtek,pow-ldo2-gpio =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
realtek,in1-differential = "true";
+ realtek,pdm_clk_div = <1> /* PDM clock = system clock / 2 */
realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */
realtek,jd2-gpio = <3>; /* Enables Jack detection for GPIO6 */
};
@@ -17,6 +17,12 @@ enum rt5677_dmic2_clk {
RT5677_DMIC_CLK2 = 1,
};
+enum rt5677_pdm_clk_div {
+ RT5677_PDM_CLK_DIV1 = 0,
+ RT5677_PDM_CLK_DIV2 = 1,
+ RT5677_PDM_CLK_DIV4 = 2,
+ RT5677_PDM_CLK_DIV3 = 3,
+};
struct rt5677_platform_data {
/* IN1/IN2/LOUT1/LOUT2/LOUT3 can optionally be differential */
@@ -27,6 +33,8 @@ struct rt5677_platform_data {
bool lout3_diff;
/* DMIC2 clock source selection */
enum rt5677_dmic2_clk dmic2_clk_pin;
+ /* System clock to PDM filter divider */
+ enum rt5677_pdm_clk_div pdm_clk_div;
/* configures GPIO, 0 - floating, 1 - pulldown, 2 - pullup */
u8 gpio_config[6];
@@ -4502,6 +4502,8 @@ static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np)
"realtek,lout2-differential");
rt5677->pdata.lout3_diff = of_property_read_bool(np,
"realtek,lout3-differential");
+ of_property_read_u32(np, "realtek,pdm_clk_div",
+ &rt5677->pdata.pdm_clk_div);
rt5677->pow_ldo2 = of_get_named_gpio(np,
"realtek,pow-ldo2-gpio", 0);
@@ -4548,6 +4550,8 @@ static void rt5677_parse_acpi(struct rt5677_priv *rt5677, struct device *dev)
{
rt5677->pdata.dmic2_clk_pin = (enum rt5677_dmic2_clk)
rt5677_parse_acpi_entry(dev, "DCLK");
+ rt5677->pdata.pdm_clk_div = (enum rt5677_pdm_clk_div)
+ rt5677_parse_acpi_entry(dev, "PCLK");
rt5677->pdata.in1_diff = (bool)rt5677_parse_acpi_entry(dev, "IN1");
rt5677->pdata.in2_diff = (bool)rt5677_parse_acpi_entry(dev, "IN2");
rt5677->pdata.lout1_diff = (bool)rt5677_parse_acpi_entry(dev, "OUT1");
@@ -4730,6 +4734,9 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
RT5677_GPIO5_DIR_OUT);
}
+ regmap_update_bits(rt5677->regmap, RT5677_PDM_DATA_CTRL1,
+ RT5677_PDM_DIV_MASK, rt5677->pdata.pdm_clk_div);
+
rt5677_init_gpio(i2c);
rt5677_irq_init(i2c);
The PDM output clock can use a divider of 1/2/3/4 based on the system clock Signed-off-by: Ben Zhang <benzh@chromium.org> --- Documentation/devicetree/bindings/sound/rt5677.txt | 5 +++++ include/sound/rt5677.h | 8 ++++++++ sound/soc/codecs/rt5677.c | 7 +++++++ 3 files changed, 20 insertions(+)