@@ -83,22 +83,6 @@ static struct snd_soc_ops jive_ops = {
.hw_params = jive_hw_params,
};
-static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- /* These endpoints are not being used. */
- snd_soc_dapm_nc_pin(dapm, "LINPUT2");
- snd_soc_dapm_nc_pin(dapm, "RINPUT2");
- snd_soc_dapm_nc_pin(dapm, "LINPUT3");
- snd_soc_dapm_nc_pin(dapm, "RINPUT3");
- snd_soc_dapm_nc_pin(dapm, "OUT3");
- snd_soc_dapm_nc_pin(dapm, "MONO");
-
- return 0;
-}
-
static struct snd_soc_dai_link jive_dai = {
.name = "wm8750",
.stream_name = "WM8750",
@@ -106,7 +90,6 @@ static struct snd_soc_dai_link jive_dai = {
.codec_dai_name = "wm8750-hifi",
.platform_name = "s3c2412-i2s",
.codec_name = "wm8750.0-001a",
- .init = jive_wm8750_init,
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ops = &jive_ops,
@@ -123,6 +106,7 @@ static struct snd_soc_card snd_soc_machine_jive = {
.num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets),
.dapm_routes = audio_map,
.num_dapm_routes = ARRAY_SIZE(audio_map),
+ .fully_routed = true,
};
static struct platform_device *jive_snd_device;
All DAPM input and output pins of the wm8750 are either used in the card's DAPM routing table or are marked as not connected. Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> --- sound/soc/samsung/jive_wm8750.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)