[v3,11/17] ARM: sa1100: make collie use new locomo drivers

Message ID	1431880077-26321-12-git-send-email-dbaryshkov@gmail.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <alsa-devel-bounces@alsa-project.org> From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> To: Russell King <linux@arm.linux.org.uk>, Daniel Mack <daniel@zonque.org>, Robert Jarzmik <robert.jarzmik@free.fr>, Linus Walleij <linus.walleij@linaro.org>, Alexandre Courbot <gnurou@gmail.com>, Wolfram Sang <wsa@the-dreams.de>, Dmitry Torokhov <dmitry.torokhov@gmail.com>, Bryan Wu <cooloney@gmail.com>, Richard Purdie <rpurdie@rpsys.net>, Samuel Ortiz <sameo@linux.intel.com>, Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>, Jingoo Han <jg1.han@samsung.com>, Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>, Tomi Valkeinen <tomi.valkeinen@ti.com>, Liam Girdwood <lgirdwood@gmail.com>, Andrea Adami <andrea.adami@gmail.com> Date: Sun, 17 May 2015 19:27:51 +0300 Message-Id: <1431880077-26321-12-git-send-email-dbaryshkov@gmail.com> In-Reply-To: <1431880077-26321-1-git-send-email-dbaryshkov@gmail.com> References: <1431880077-26321-1-git-send-email-dbaryshkov@gmail.com> Cc: linux-fbdev@vger.kernel.org, alsa-devel@alsa-project.org, linux-spi@vger.kernel.org, linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org Subject: [alsa-devel] [PATCH v3 11/17] ARM: sa1100: make collie use new locomo drivers Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org

diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index c6f6ed1..37af126 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -48,7 +48,6 @@ endchoice config SA1100_COLLIE bool "Sharp Zaurus SL5500" # FIXME: select ARM_SA11x0_CPUFREQ - select SHARP_LOCOMO select SHARP_PARAM select SHARP_SCOOP help diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 3cc2b71..b6dda7a 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -24,13 +24,21 @@ #include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/mfd/ucb1x00.h> +#include <linux/mfd/locomo.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/timer.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/i2c.h> #include <linux/gpio.h> #include <linux/power/gpio-charger.h> +#include <linux/gpio/machine.h> +#include <linux/iio/machine.h> +#include <linux/mmc/host.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/spi/mmc_spi.h> #include <video/sa1100fb.h> @@ -47,7 +55,6 @@ #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> -#include <asm/hardware/locomo.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/irqs.h> @@ -151,36 +158,54 @@ static struct platform_device collie_power_device = { .dev.platform_data = &collie_power_data, }; -#ifdef CONFIG_SHARP_LOCOMO /* * low-level UART features. */ -struct platform_device collie_locomo_device; +static struct gpio collie_uart_gpio[] = { + { COLLIE_GPIO_CTS, GPIOF_IN, "CTS" }, + { COLLIE_GPIO_RTS, GPIOF_OUT_INIT_LOW, "RTS" }, + { COLLIE_GPIO_DTR, GPIOF_OUT_INIT_LOW, "DTR" }, + { COLLIE_GPIO_DSR, GPIOF_IN, "DSR" }, +}; + +static bool collie_uart_gpio_ok; static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl) { - if (mctrl & TIOCM_RTS) - locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0); - else - locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1); - - if (mctrl & TIOCM_DTR) - locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0); - else - locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1); + if (!collie_uart_gpio_ok) { + int rc = gpio_request_array(collie_uart_gpio, + ARRAY_SIZE(collie_uart_gpio)); + if (rc) + pr_err("collie_uart_set_mctrl: gpio request %d\n", rc); + else + collie_uart_gpio_ok = true; + } + + if (collie_uart_gpio_ok) { + gpio_set_value(COLLIE_GPIO_RTS, !(mctrl & TIOCM_RTS)); + gpio_set_value(COLLIE_GPIO_DTR, !(mctrl & TIOCM_DTR)); + } } static u_int collie_uart_get_mctrl(struct uart_port *port) { int ret = TIOCM_CD; - unsigned int r; - r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR); - if (r == -ENODEV) + if (!collie_uart_gpio_ok) { + int rc = gpio_request_array(collie_uart_gpio, + ARRAY_SIZE(collie_uart_gpio)); + if (rc) + pr_err("collie_uart_get_mctrl: gpio request %d\n", rc); + else + collie_uart_gpio_ok = true; + } + + if (!collie_uart_gpio_ok) return ret; - if (r & LOCOMO_GPIO_CTS) + + if (gpio_get_value(COLLIE_GPIO_CTS)) ret |= TIOCM_CTS; - if (r & LOCOMO_GPIO_DSR) + if (gpio_get_value(COLLIE_GPIO_DSR)) ret |= TIOCM_DSR; return ret; @@ -191,33 +216,35 @@ static struct sa1100_port_fns collie_port_fns __initdata = { .get_mctrl = collie_uart_get_mctrl, }; -static int collie_uart_probe(struct locomo_dev *dev) -{ - return 0; -} - -static int collie_uart_remove(struct locomo_dev *dev) -{ - return 0; -} +static struct regulator_consumer_supply collie_amp_on_consumer_supplies[] = { + REGULATOR_SUPPLY("VCC", "1-004e"), +}; -static struct locomo_driver collie_uart_driver = { - .drv = { - .name = "collie_uart", +static struct regulator_init_data collie_amp_on_init_data = { + .constraints = { + .name = "AMP_ON", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .devid = LOCOMO_DEVID_UART, - .probe = collie_uart_probe, - .remove = collie_uart_remove, + .consumer_supplies = collie_amp_on_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(collie_amp_on_consumer_supplies), }; -static int __init collie_uart_init(void) -{ - return locomo_driver_register(&collie_uart_driver); -} -device_initcall(collie_uart_init); - -#endif +static struct fixed_voltage_config collie_amp_on_data = { + .supply_name = "amp_on", + .microvolts = 3300000, + .gpio = COLLIE_GPIO_AMP2_ON, + .startup_delay = 5, + .enable_high = 1, + .init_data = &collie_amp_on_init_data, +}; +static struct platform_device collie_amp_on_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &collie_amp_on_data, + }, +}; static struct resource locomo_resources[] = { [0] = DEFINE_RES_MEM(0x40000000, SZ_8K), @@ -225,14 +252,15 @@ static struct resource locomo_resources[] = { }; static struct locomo_platform_data locomo_info = { - .irq_base = IRQ_BOARD_START, + .gpio_base = COLLIE_LOCOMO_GPIO_BASE, + .comadj = 128, }; -struct platform_device collie_locomo_device = { +static struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, .dev = { - .platform_data = &locomo_info, + .platform_data = &locomo_info, }, .num_resources = ARRAY_SIZE(locomo_resources), .resource = locomo_resources, @@ -270,7 +298,55 @@ static struct platform_device collie_gpio_keys_device = { }, }; +static int collie_mmc_init(struct device *dev, + irqreturn_t (*isr)(int, void*), void *mmc) +{ + int ret; + + ret = gpio_request(COLLIE_GPIO_CARD_POWER, "MMC power"); + if (!ret) + ret = gpio_direction_output(COLLIE_GPIO_CARD_POWER, 0); + if (ret) + gpio_free(COLLIE_GPIO_CARD_POWER); + return ret; +} + +static void collie_mmc_exit(struct device *dev, void *mmc) +{ + gpio_free(COLLIE_GPIO_CARD_POWER); +} + +static void collie_mmc_setpower(struct device *dev, unsigned int mask) +{ + gpio_set_value(COLLIE_GPIO_CARD_POWER, !!mask); +} + +static struct mmc_spi_platform_data collie_mmc_data = { + .init = collie_mmc_init, + .exit = collie_mmc_exit, + .setpower = collie_mmc_setpower, + .detect_delay = 200, + .powerup_msecs = 200, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO, + .cd_gpio = COLLIE_GPIO_CARD_DETECT, + .ro_gpio = COLLIE_GPIO_CARD_RO, + .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, +}; + +static struct spi_board_info collie_spi_board_info[] __initdata = { + { + .modalias = "mmc_spi", + .platform_data = &collie_mmc_data, + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + static struct platform_device *devices[] __initdata = { + &collie_amp_on_device, &collie_locomo_device, &colliescoop_device, &collie_power_device, @@ -347,10 +423,39 @@ static struct sa1100fb_mach_info collie_lcd_info = { .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), +}; -#ifdef CONFIG_BACKLIGHT_LOCOMO - .lcd_power = locomolcd_power -#endif +static struct iio_map locomo_iio_map[] = { + { + .consumer_dev_name = "locomo-lcd.0", + .consumer_channel = "comadj", + .adc_channel_label = "CH0", + }, + { } +}; + +static struct i2c_board_info locomo_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("m62332", 0x4e), + .platform_data = locomo_iio_map, + }, +}; + +static struct gpiod_lookup_table collie_bl_gpios_table = { + .dev_id = "locomo-backlight.0", + .table = { + GPIO_LOOKUP("locomo-gpio", 9, "flvr", GPIO_ACTIVE_HIGH), + { }, + }, +}, collie_lcd_gpios_table = { + .dev_id = "locomo-lcd.0", + .table = { + GPIO_LOOKUP("locomo-gpio", 4, "VSHA", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("locomo-gpio", 5, "VSHD", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("locomo-gpio", 6, "Vee", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("locomo-gpio", 7, "MOD", GPIO_ACTIVE_HIGH), + { }, + }, }; static void __init collie_init(void) @@ -381,11 +486,19 @@ static void __init collie_init(void) GPSR |= _COLLIE_GPIO_UCB1x00_RESET; + sharpsl_save_param(); + sa11x0_ppc_configure_mcp(); platform_scoop_config = &collie_pcmcia_config; + if (sharpsl_param.comadj != -1) + locomo_info.comadj = sharpsl_param.comadj; + + gpiod_add_lookup_table(&collie_bl_gpios_table); + gpiod_add_lookup_table(&collie_lcd_gpios_table); + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); @@ -397,7 +510,13 @@ static void __init collie_init(void) sa11x0_register_mcp(&collie_mcp_data); sa11x0_register_irda(&collie_ir_data); - sharpsl_save_param(); + i2c_register_board_info(1, + locomo_i2c_devs, ARRAY_SIZE(locomo_i2c_devs)); + + spi_register_board_info(collie_spi_board_info, + ARRAY_SIZE(collie_spi_board_info)); + + regulator_has_full_constraints(); } static struct map_desc collie_io_desc[] __initdata = { @@ -419,9 +538,7 @@ static void __init collie_map_io(void) sa1100_map_io(); iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc)); -#ifdef CONFIG_SHARP_LOCOMO sa1100_register_uart_fns(&collie_port_fns); -#endif sa1100_register_uart(0, 3); sa1100_register_uart(1, 1); } diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h index b478ca1..2e3bf80 100644 --- a/arch/arm/mach-sa1100/include/mach/collie.h +++ b/arch/arm/mach-sa1100/include/mach/collie.h @@ -24,12 +24,12 @@ extern void locomolcd_power(int on); #define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14 #define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15 #define COLLIE_SCP_5VON SCOOP_GPCR_PA16 -#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17 +#define COLLIE_GPIO_AMP2_ON (COLLIE_SCOOP_GPIO_BASE + 6) #define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7) #define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19 #define COLLIE_SCOOP_IO_DIR (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ - COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \ + COLLIE_SCP_5VON | \ COLLIE_SCP_LB_VOL_CHG) #define COLLIE_SCOOP_IO_OUT (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R) @@ -81,7 +81,7 @@ extern void locomolcd_power(int on); #define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 #define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 #define COLLIE_GPIO_IR_ON (COLLIE_TC35143_GPIO_BASE + 3) -#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 +#define COLLIE_GPIO_AMP1_ON (COLLIE_TC35143_GPIO_BASE + 4) #define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 #define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 #define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 @@ -92,4 +92,14 @@ extern void locomolcd_power(int on); #define COLLIE_TC35143_GPIO_OUT (UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \ | UCB_IO_6) +/* GPIOs on LoCoMo GA */ +#define COLLIE_LOCOMO_GPIO_BASE (GPIO_MAX + 13 + 10) +#define COLLIE_GPIO_RTS (COLLIE_LOCOMO_GPIO_BASE + 0) +#define COLLIE_GPIO_CTS (COLLIE_LOCOMO_GPIO_BASE + 1) +#define COLLIE_GPIO_DSR (COLLIE_LOCOMO_GPIO_BASE + 2) +#define COLLIE_GPIO_DTR (COLLIE_LOCOMO_GPIO_BASE + 3) +#define COLLIE_GPIO_CARD_DETECT (COLLIE_LOCOMO_GPIO_BASE + 13) +#define COLLIE_GPIO_CARD_RO (COLLIE_LOCOMO_GPIO_BASE + 14) +#define COLLIE_GPIO_CARD_POWER (COLLIE_LOCOMO_GPIO_BASE + 15) + #endif

[v3,11/17] ARM: sa1100: make collie use new locomo drivers

Commit Message

Patch