deleted file mode 100644
@@ -1,255 +0,0 @@
-/*
- * Backlight control code for Sharp Zaurus SL-5500
- *
- * Copyright 2005 John Lenz <lenz@cs.wisc.edu>
- * Maintainer: Pavel Machek <pavel@ucw.cz> (unless John wants to :-)
- * GPL v2
- *
- * This driver assumes single CPU. That's okay, because collie is
- * slightly old hardware, and no one is going to retrofit second CPU to
- * old PDA.
- */
-
-/* LCD power functions */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/backlight.h>
-
-#include <asm/hardware/locomo.h>
-#include <asm/irq.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/mach-types.h>
-
-#include "../../../arch/arm/mach-sa1100/generic.h"
-
-static struct backlight_device *locomolcd_bl_device;
-static struct locomo_dev *locomolcd_dev;
-static unsigned long locomolcd_flags;
-#define LOCOMOLCD_SUSPENDED 0x01
-
-static void locomolcd_on(int comadj)
-{
- locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0);
- locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 1);
- mdelay(2);
-
- locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0);
- locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 1);
- mdelay(2);
-
- locomo_m62332_senddata(locomolcd_dev, comadj, 0);
- mdelay(5);
-
- locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0);
- locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 1);
- mdelay(10);
-
- /* TFTCRST | CPSOUT=0 | CPSEN */
- locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC);
-
- /* Set CPSD */
- locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD);
-
- /* TFTCRST | CPSOUT=0 | CPSEN */
- locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC);
- mdelay(10);
-
- locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0);
- locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 1);
-}
-
-static void locomolcd_off(int comadj)
-{
- /* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */
- locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC);
- mdelay(1);
-
- locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0);
- mdelay(110);
-
- locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0);
- mdelay(700);
-
- /* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */
- locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC);
- locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0);
- locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0);
-}
-
-void locomolcd_power(int on)
-{
- int comadj = sharpsl_param.comadj;
- unsigned long flags;
-
- local_irq_save(flags);
-
- if (!locomolcd_dev) {
- local_irq_restore(flags);
- return;
- }
-
- /* read comadj */
- if (comadj == -1 && machine_is_collie())
- comadj = 128;
- if (comadj == -1 && machine_is_poodle())
- comadj = 118;
-
- if (on)
- locomolcd_on(comadj);
- else
- locomolcd_off(comadj);
-
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(locomolcd_power);
-
-static int current_intensity;
-
-static int locomolcd_set_intensity(struct backlight_device *bd)
-{
- int intensity = bd->props.brightness;
-
- if (bd->props.power != FB_BLANK_UNBLANK)
- intensity = 0;
- if (bd->props.fb_blank != FB_BLANK_UNBLANK)
- intensity = 0;
- if (locomolcd_flags & LOCOMOLCD_SUSPENDED)
- intensity = 0;
-
- switch (intensity) {
- /*
- * AC and non-AC are handled differently,
- * but produce same results in sharp code?
- */
- case 0:
- locomo_frontlight_set(locomolcd_dev, 0, 0, 161);
- break;
- case 1:
- locomo_frontlight_set(locomolcd_dev, 117, 0, 161);
- break;
- case 2:
- locomo_frontlight_set(locomolcd_dev, 163, 0, 148);
- break;
- case 3:
- locomo_frontlight_set(locomolcd_dev, 194, 0, 161);
- break;
- case 4:
- locomo_frontlight_set(locomolcd_dev, 194, 1, 161);
- break;
- default:
- return -ENODEV;
- }
- current_intensity = intensity;
- return 0;
-}
-
-static int locomolcd_get_intensity(struct backlight_device *bd)
-{
- return current_intensity;
-}
-
-static const struct backlight_ops locomobl_data = {
- .get_brightness = locomolcd_get_intensity,
- .update_status = locomolcd_set_intensity,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int locomolcd_suspend(struct device *dev)
-{
- locomolcd_flags |= LOCOMOLCD_SUSPENDED;
- locomolcd_set_intensity(locomolcd_bl_device);
- return 0;
-}
-
-static int locomolcd_resume(struct device *dev)
-{
- locomolcd_flags &= ~LOCOMOLCD_SUSPENDED;
- locomolcd_set_intensity(locomolcd_bl_device);
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(locomolcd_pm_ops, locomolcd_suspend, locomolcd_resume);
-
-static int locomolcd_probe(struct locomo_dev *ldev)
-{
- struct backlight_properties props;
- unsigned long flags;
-
- local_irq_save(flags);
- locomolcd_dev = ldev;
-
- locomo_gpio_set_dir(ldev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
-
- /*
- * the poodle_lcd_power function is called for the first time
- * from fs_initcall, which is before locomo is activated.
- * We need to recall poodle_lcd_power here
- */
- if (machine_is_poodle())
- locomolcd_power(1);
-
- local_irq_restore(flags);
-
- memset(&props, 0, sizeof(struct backlight_properties));
- props.type = BACKLIGHT_RAW;
- props.max_brightness = 4;
- locomolcd_bl_device = backlight_device_register("locomo-bl",
- &ldev->dev, NULL,
- &locomobl_data, &props);
-
- if (IS_ERR(locomolcd_bl_device))
- return PTR_ERR(locomolcd_bl_device);
-
- /* Set up frontlight so that screen is readable */
- locomolcd_bl_device->props.brightness = 2;
- locomolcd_set_intensity(locomolcd_bl_device);
-
- return 0;
-}
-
-static int locomolcd_remove(struct locomo_dev *dev)
-{
- unsigned long flags;
-
- locomolcd_bl_device->props.brightness = 0;
- locomolcd_bl_device->props.power = 0;
- locomolcd_set_intensity(locomolcd_bl_device);
-
- backlight_device_unregister(locomolcd_bl_device);
- local_irq_save(flags);
- locomolcd_dev = NULL;
- local_irq_restore(flags);
- return 0;
-}
-
-static struct locomo_driver poodle_lcd_driver = {
- .drv = {
- .name = "locomo-backlight",
- .pm = &locomolcd_pm_ops,
- },
- .devid = LOCOMO_DEVID_BACKLIGHT,
- .probe = locomolcd_probe,
- .remove = locomolcd_remove,
-};
-
-static int __init locomolcd_init(void)
-{
- return locomo_driver_register(&poodle_lcd_driver);
-}
-
-static void __exit locomolcd_exit(void)
-{
- locomo_driver_unregister(&poodle_lcd_driver);
-}
-
-module_init(locomolcd_init);
-module_exit(locomolcd_exit);
-
-MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@ucw.cz>");
-MODULE_DESCRIPTION("Collie LCD driver");
-MODULE_LICENSE("GPL");
Old locomolcd driver is now completely obsolete by new locomo_bl and locomo_lcd drivers, so let's drop it. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> --- drivers/video/backlight/locomolcd.c | 255 ------------------------------------ 1 file changed, 255 deletions(-) delete mode 100644 drivers/video/backlight/locomolcd.c