diff mbox

[12/13,media] omap3isp: Support for deferred probing when requesting DMA channel

Message ID 1432646768-12532-13-git-send-email-peter.ujfalusi@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Ujfalusi May 26, 2015, 1:26 p.m. UTC
Switch to use ma_request_slave_channel_compat_reason() to request the DMA
channel. Only fall back to pio mode if the error code returned is not
-EPROBE_DEFER, otherwise return from the probe with the -EPROBE_DEFER.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
CC: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
---
 drivers/media/platform/omap3isp/isphist.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

Comments

Laurent Pinchart Nov. 9, 2015, 7:50 p.m. UTC | #1
Hi Peter,

Thank you for the patch.

What happened to this patch series ? It looks like 
dma_request_slave_channel_compat_reason() isn't in mainline, so I can't apply 
this patch.

I'll mark this patch as deferred in patchwork, please resubmit it if you 
resubmit the series (and by the look of it the issue you're trying to fix 
still exists, so it would be nice if you could get it eventually fixed).

On Tuesday 26 May 2015 16:26:07 Peter Ujfalusi wrote:
> Switch to use ma_request_slave_channel_compat_reason() to request the DMA
> channel. Only fall back to pio mode if the error code returned is not
> -EPROBE_DEFER, otherwise return from the probe with the -EPROBE_DEFER.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> CC: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
> ---
>  drivers/media/platform/omap3isp/isphist.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/platform/omap3isp/isphist.c
> b/drivers/media/platform/omap3isp/isphist.c index
> 7138b043a4aa..e690ca13af0e 100644
> --- a/drivers/media/platform/omap3isp/isphist.c
> +++ b/drivers/media/platform/omap3isp/isphist.c
> @@ -499,14 +499,20 @@ int omap3isp_hist_init(struct isp_device *isp)
>  		if (res)
>  			sig = res->start;
> 
> -		hist->dma_ch = dma_request_slave_channel_compat(mask,
> +		hist->dma_ch = dma_request_slave_channel_compat_reason(mask,
>  				omap_dma_filter_fn, &sig, isp->dev, "hist");
> -		if (!hist->dma_ch)
> +		if (IS_ERR(hist->dma_ch)) {
> +			ret = PTR_ERR(hist->dma_ch);
> +			if (ret == -EPROBE_DEFER)
> +				return ret;
> +
> +			hist->dma_ch = NULL;
>  			dev_warn(isp->dev,
>  				 "hist: DMA channel request failed, using PIO\n");
> -		else
> +		} else {
>  			dev_dbg(isp->dev, "hist: using DMA channel %s\n",
>  				dma_chan_name(hist->dma_ch));
> +		}
>  	}
> 
>  	hist->ops = &hist_ops;
Peter Ujfalusi Nov. 10, 2015, 7:56 a.m. UTC | #2
Hi Laurent,

On 11/09/2015 09:50 PM, Laurent Pinchart wrote:
> Hi Peter,
> 
> Thank you for the patch.
> 
> What happened to this patch series ? It looks like 
> dma_request_slave_channel_compat_reason() isn't in mainline, so I can't apply 
> this patch.
> 
> I'll mark this patch as deferred in patchwork, please resubmit it if you 
> resubmit the series

The original series - containing this patch - generated a bit of discussion
and it seams that I will need to do bigger change in the dmaengine API
compared to this.
I think this patch can be dropped as the dmaengine changes will not go in as
they were.

(and by the look of it the issue you're trying to fix
> still exists, so it would be nice if you could get it eventually fixed).

Yes, the issue still valid for the OMAP/DaVinci driver the series was touching.

I will try to send a new series in the coming weeks.

Thanks,
Péter
> 
> On Tuesday 26 May 2015 16:26:07 Peter Ujfalusi wrote:
>> Switch to use ma_request_slave_channel_compat_reason() to request the DMA
>> channel. Only fall back to pio mode if the error code returned is not
>> -EPROBE_DEFER, otherwise return from the probe with the -EPROBE_DEFER.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> CC: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
>> ---
>>  drivers/media/platform/omap3isp/isphist.c | 12 +++++++++---
>>  1 file changed, 9 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/platform/omap3isp/isphist.c
>> b/drivers/media/platform/omap3isp/isphist.c index
>> 7138b043a4aa..e690ca13af0e 100644
>> --- a/drivers/media/platform/omap3isp/isphist.c
>> +++ b/drivers/media/platform/omap3isp/isphist.c
>> @@ -499,14 +499,20 @@ int omap3isp_hist_init(struct isp_device *isp)
>>  		if (res)
>>  			sig = res->start;
>>
>> -		hist->dma_ch = dma_request_slave_channel_compat(mask,
>> +		hist->dma_ch = dma_request_slave_channel_compat_reason(mask,
>>  				omap_dma_filter_fn, &sig, isp->dev, "hist");
>> -		if (!hist->dma_ch)
>> +		if (IS_ERR(hist->dma_ch)) {
>> +			ret = PTR_ERR(hist->dma_ch);
>> +			if (ret == -EPROBE_DEFER)
>> +				return ret;
>> +
>> +			hist->dma_ch = NULL;
>>  			dev_warn(isp->dev,
>>  				 "hist: DMA channel request failed, using PIO\n");
>> -		else
>> +		} else {
>>  			dev_dbg(isp->dev, "hist: using DMA channel %s\n",
>>  				dma_chan_name(hist->dma_ch));
>> +		}
>>  	}
>>
>>  	hist->ops = &hist_ops;
>
diff mbox

Patch

diff --git a/drivers/media/platform/omap3isp/isphist.c b/drivers/media/platform/omap3isp/isphist.c
index 7138b043a4aa..e690ca13af0e 100644
--- a/drivers/media/platform/omap3isp/isphist.c
+++ b/drivers/media/platform/omap3isp/isphist.c
@@ -499,14 +499,20 @@  int omap3isp_hist_init(struct isp_device *isp)
 		if (res)
 			sig = res->start;
 
-		hist->dma_ch = dma_request_slave_channel_compat(mask,
+		hist->dma_ch = dma_request_slave_channel_compat_reason(mask,
 				omap_dma_filter_fn, &sig, isp->dev, "hist");
-		if (!hist->dma_ch)
+		if (IS_ERR(hist->dma_ch)) {
+			ret = PTR_ERR(hist->dma_ch);
+			if (ret == -EPROBE_DEFER)
+				return ret;
+
+			hist->dma_ch = NULL;
 			dev_warn(isp->dev,
 				 "hist: DMA channel request failed, using PIO\n");
-		else
+		} else {
 			dev_dbg(isp->dev, "hist: using DMA channel %s\n",
 				dma_chan_name(hist->dma_ch));
+		}
 	}
 
 	hist->ops = &hist_ops;