@@ -31,7 +31,7 @@
#include "nau8825.h"
#define NAU_FREF_MAX 13500000
-#define NAU_FVCO_MAX 100000000
+#define NAU_FVCO_MAX 124000000
#define NAU_FVCO_MIN 90000000
struct nau8825_fll {
@@ -874,8 +874,8 @@ static int nau8825_codec_probe(struct snd_soc_codec *codec)
static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs,
struct nau8825_fll *fll_param)
{
- u64 fvco;
- unsigned int fref, i;
+ u64 fvco, fvco_max;
+ unsigned int fref, i, fvco_sel;
/* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing
* freq_in by 1, 2, 4, or 8 using FLL pre-scalar.
@@ -900,18 +900,23 @@ static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs,
fll_param->ratio = fll_ratio[i].val;
/* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs.
- * FDCO must be within the 90MHz - 100MHz or the FFL cannot be
+ * FDCO must be within the 90MHz - 124MHz or the FFL cannot be
* guaranteed across the full range of operation.
* FDCO = freq_out * 2 * mclk_src_scaling
*/
+ fvco_max = 0;
+ fvco_sel = ARRAY_SIZE(mclk_src_scaling);
for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) {
fvco = 256 * fs * 2 * mclk_src_scaling[i].param;
- if (NAU_FVCO_MIN < fvco && fvco < NAU_FVCO_MAX)
- break;
+ if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX &&
+ fvco_max < fvco) {
+ fvco_max = fvco;
+ fvco_sel = i;
+ }
}
- if (i == ARRAY_SIZE(mclk_src_scaling))
+ if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel)
return -EINVAL;
- fll_param->mclk_src = mclk_src_scaling[i].val;
+ fll_param->mclk_src = mclk_src_scaling[fvco_sel].val;
/* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional
* input based on FDCO, FREF and FLL ratio.
@@ -926,7 +931,8 @@ static void nau8825_fll_apply(struct nau8825 *nau8825,
struct nau8825_fll *fll_param)
{
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
- NAU8825_CLK_MCLK_SRC_MASK, fll_param->mclk_src);
+ NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK,
+ NAU8825_CLK_SRC_MCLK | fll_param->mclk_src);
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1,
NAU8825_FLL_RATIO_MASK, fll_param->ratio);
/* FLL 16-bit fractional input */
@@ -939,10 +945,25 @@ static void nau8825_fll_apply(struct nau8825 *nau8825,
NAU8825_FLL_REF_DIV_MASK, fll_param->clk_ref_div);
/* select divided VCO input */
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
- NAU8825_FLL_FILTER_SW_MASK, 0x0000);
- /* FLL sigma delta modulator enable */
- regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6,
- NAU8825_SDM_EN_MASK, NAU8825_SDM_EN);
+ NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF);
+ /* Disable free-running mode */
+ regmap_update_bits(nau8825->regmap,
+ NAU8825_REG_FLL6, NAU8825_DCO_EN, 0);
+ if (fll_param->fll_frac) {
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
+ NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
+ NAU8825_FLL_FTR_SW_MASK,
+ NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
+ NAU8825_FLL_FTR_SW_FILTER);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6,
+ NAU8825_SDM_EN, NAU8825_SDM_EN);
+ } else {
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
+ NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
+ NAU8825_FLL_FTR_SW_MASK, NAU8825_FLL_FTR_SW_ACCU);
+ regmap_update_bits(nau8825->regmap,
+ NAU8825_REG_FLL6, NAU8825_SDM_EN, 0);
+ }
}
/* freq_out must be 256*Fs in order to achieve the best performance */
@@ -970,6 +991,36 @@ static int nau8825_set_pll(struct snd_soc_codec *codec, int pll_id, int source,
return 0;
}
+static int nau8825_mclk_prepare(struct nau8825 *nau8825, unsigned int freq)
+{
+ int ret = 0;
+
+ /* We selected MCLK source but the clock itself managed externally */
+ if (!nau8825->mclk)
+ return 0;
+
+ if (!nau8825->mclk_freq) {
+ ret = clk_prepare_enable(nau8825->mclk);
+ if (ret) {
+ dev_err(nau8825->dev, "Unable to prepare codec mclk\n");
+ return ret;
+ }
+ }
+
+ if (nau8825->mclk_freq != freq) {
+ nau8825->mclk_freq = freq;
+
+ freq = clk_round_rate(nau8825->mclk, freq);
+ ret = clk_set_rate(nau8825->mclk, freq);
+ if (ret) {
+ dev_err(nau8825->dev, "Unable to set mclk rate\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id,
unsigned int freq)
{
@@ -981,29 +1032,9 @@ static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id,
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK);
regmap_update_bits(regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN, 0);
-
- /* We selected MCLK source but the clock itself managed externally */
- if (!nau8825->mclk)
- break;
-
- if (!nau8825->mclk_freq) {
- ret = clk_prepare_enable(nau8825->mclk);
- if (ret) {
- dev_err(nau8825->dev, "Unable to prepare codec mclk\n");
- return ret;
- }
- }
-
- if (nau8825->mclk_freq != freq) {
- nau8825->mclk_freq = freq;
-
- freq = clk_round_rate(nau8825->mclk, freq);
- ret = clk_set_rate(nau8825->mclk, freq);
- if (ret) {
- dev_err(nau8825->dev, "Unable to set mclk rate\n");
- return ret;
- }
- }
+ ret = nau8825_mclk_prepare(nau8825, freq);
+ if (ret)
+ return ret;
break;
case NAU8825_CLK_INTERNAL:
@@ -1011,7 +1042,32 @@ static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id,
NAU8825_DCO_EN);
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
+ if (nau8825->mclk_freq) {
+ clk_disable_unprepare(nau8825->mclk);
+ nau8825->mclk_freq = 0;
+ }
+
+ break;
+ case NAU8825_CLK_FLL_MCLK:
+ regmap_update_bits(regmap, NAU8825_REG_FLL3,
+ NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_MCLK);
+ ret = nau8825_mclk_prepare(nau8825, freq);
+ if (ret)
+ return ret;
+
+ break;
+ case NAU8825_CLK_FLL_BLK:
+ regmap_update_bits(regmap, NAU8825_REG_FLL3,
+ NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_BLK);
+ if (nau8825->mclk_freq) {
+ clk_disable_unprepare(nau8825->mclk);
+ nau8825->mclk_freq = 0;
+ }
+ break;
+ case NAU8825_CLK_FLL_FS:
+ regmap_update_bits(regmap, NAU8825_REG_FLL3,
+ NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_FS);
if (nau8825->mclk_freq) {
clk_disable_unprepare(nau8825->mclk);
nau8825->mclk_freq = 0;
@@ -112,20 +112,28 @@
/* FLL3 (0x06) */
#define NAU8825_FLL_INTEGER_MASK (0x3ff << 0)
+#define NAU8825_FLL_CLK_SRC_SFT 10
+#define NAU8825_FLL_CLK_SRC_MASK (0x3 << NAU8825_FLL_CLK_SRC_SFT)
+#define NAU8825_FLL_CLK_SRC_MCLK (0 << NAU8825_FLL_CLK_SRC_SFT)
+#define NAU8825_FLL_CLK_SRC_BLK (0x2 << NAU8825_FLL_CLK_SRC_SFT)
+#define NAU8825_FLL_CLK_SRC_FS (0x3 << NAU8825_FLL_CLK_SRC_SFT)
/* FLL4 (0x07) */
#define NAU8825_FLL_REF_DIV_MASK (0x3 << 10)
/* FLL5 (0x08) */
-#define NAU8825_FLL_FILTER_SW_MASK (0x1 << 14)
+#define NAU8825_FLL_PDB_DAC_EN (0x1 << 15)
+#define NAU8825_FLL_LOOP_FTR_EN (0x1 << 14)
+#define NAU8825_FLL_CLK_SW_MASK (0x1 << 13)
+#define NAU8825_FLL_CLK_SW_N2 (0x1 << 13)
+#define NAU8825_FLL_CLK_SW_REF (0x0 << 13)
+#define NAU8825_FLL_FTR_SW_MASK (0x1 << 12)
+#define NAU8825_FLL_FTR_SW_ACCU (0x1 << 12)
+#define NAU8825_FLL_FTR_SW_FILTER (0x0 << 12)
/* FLL6 (0x9) */
-#define NAU8825_DCO_EN_MASK (0x1 << 15)
#define NAU8825_DCO_EN (0x1 << 15)
-#define NAU8825_DCO_DIS (0x0 << 15)
-#define NAU8825_SDM_EN_MASK (0x1 << 14)
#define NAU8825_SDM_EN (0x1 << 14)
-#define NAU8825_SDM_DIS (0x0 << 14)
/* HSD_CTRL (0xc) */
#define NAU8825_HSD_AUTO_MODE (1 << 6)
@@ -306,6 +314,9 @@
enum {
NAU8825_CLK_MCLK = 0,
NAU8825_CLK_INTERNAL,
+ NAU8825_CLK_FLL_MCLK,
+ NAU8825_CLK_FLL_BLK,
+ NAU8825_CLK_FLL_FS,
};
struct nau8825 {
Extend FLL clock source from MCLK/BCLK/FS. Modify FLL calculation and parameter setting. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> --- sound/soc/codecs/nau8825.c | 128 ++++++++++++++++++++++++++++++++------------- sound/soc/codecs/nau8825.h | 21 ++++++-- 2 files changed, 108 insertions(+), 41 deletions(-)