From patchwork Fri Mar 25 23:10:39 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ben Zhang X-Patchwork-Id: 8673521 Return-Path: X-Original-To: patchwork-alsa-devel@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id E941FC0553 for ; Fri, 25 Mar 2016 23:12:16 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id C193E20340 for ; Fri, 25 Mar 2016 23:12:15 +0000 (UTC) Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) by mail.kernel.org (Postfix) with ESMTP id 3E00920270 for ; Fri, 25 Mar 2016 23:12:14 +0000 (UTC) Received: by alsa0.perex.cz (Postfix, from userid 1000) id 3F9D626172B; Sat, 26 Mar 2016 00:12:12 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-1.8 required=5.0 tests=BAYES_00,DKIM_SIGNED, RCVD_IN_DNSWL_NONE, T_DKIM_INVALID, UNPARSEABLE_RELAY autolearn=no version=3.3.1 Received: from alsa0.perex.cz (localhost [127.0.0.1]) by alsa0.perex.cz (Postfix) with ESMTP id 1D6AB261294; Sat, 26 Mar 2016 00:12:04 +0100 (CET) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa0.perex.cz (Postfix, from userid 1000) id 96507261295; Sat, 26 Mar 2016 00:12:02 +0100 (CET) Received: from mail-pa0-f48.google.com (mail-pa0-f48.google.com [209.85.220.48]) by alsa0.perex.cz (Postfix) with ESMTP id 59AAA2610A3 for ; Sat, 26 Mar 2016 00:11:57 +0100 (CET) Received: by mail-pa0-f48.google.com with SMTP id fe3so54826907pab.1 for ; Fri, 25 Mar 2016 16:11:57 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=from:to:cc:subject:date:message-id; bh=Fc2UGcUpjMBQJyrmn3p7zA6PcWQwl7VmalDueNcCK9Y=; b=Av6VLqt2+swNjailuf52+TWHzqXh+pCPhP+O9kHA4NZabpTUT7GvTjxmr2HeTjKiSF ct38ZG5RSKl10bCliTCM0sTChtIAWLoWdAfZouoGQaJHXfsdcMAnsdpKRzh2dhfk9unj 2Hb+eL9s902EyBFQ86o1IQRcVBWVnorL8DInA= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id; bh=Fc2UGcUpjMBQJyrmn3p7zA6PcWQwl7VmalDueNcCK9Y=; b=J0MX3vm05jwNove+yMlphwW6d5+D6Ieux1sxAGISGVYSTNbu1gq8rafk8o+jlqA/XU Iiwl+jjNwUNFINQ2n/y0ZZKuniGfxUGSQxT69rc4lWJJbLzrBBxps6jG44onA1DGbU4f RSv7EHIDnEvbHvwiIwT2rXW8pIb+LmdaWx+YUdosCY/2ZBSP8BDNylKE6pz7ORi1xOh2 1g+HNn8lhxnjI7fs0iYUObuBdln/ZcMs9P4h6U6tj70hTRbs4f34oO7pCJ+PQpvVKF/b 0FTS2AITZY2YE2OVPJIWGrUP3Zd87XBtNhXwl5ED0z0igOkjsfaim0A/9ytHlAgDyORE 8l2w== X-Gm-Message-State: AD7BkJJZcISr0+X//ZyzCz9Ah973pNGfhbCNmpI4YJWIUgcYdsQYra5aalOOTbfRaQcjcYA4 X-Received: by 10.66.118.108 with SMTP id kl12mr24706282pab.151.1458947516078; Fri, 25 Mar 2016 16:11:56 -0700 (PDT) Received: from benzh.mtv.corp.google.com ([172.22.65.67]) by smtp.gmail.com with ESMTPSA id ul7sm479525pac.41.2016.03.25.16.11.55 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Fri, 25 Mar 2016 16:11:55 -0700 (PDT) From: Ben Zhang To: Mark Brown Date: Fri, 25 Mar 2016 16:10:39 -0700 Message-Id: <1458947439-21936-1-git-send-email-benzh@chromium.org> X-Mailer: git-send-email 2.8.0.rc3.226.g39d4020 Cc: alsa-devel@alsa-project.org, Ben Zhang , John Hsu , Liam Girdwood , YHCHuang@nuvoton.com, Anatol Pomozov , CTLIN0@nuvoton.com, Dylan Reid , yong.zhi@intel.com, mhkuo@nuvoton.com Subject: [alsa-devel] [PATCH] ASoC: nau8825: Fix jack detection across suspend X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org X-Virus-Scanned: ClamAV using ClamSMTP Jack plug status is rechecked at resume to handle plug/unplug in S3 when the chip has no power. Suspend/resume callbacks are moved from the i2c dev_pm_ops to snd_soc_codec_driver. soc_resume_deferred is a delayed work which may trigger nau8825_set_bias_level. The bias change races against dev_pm_ops, causing jack detection issues. soc_resume_deferred ensures bias change and snd_soc_codec_driver suspend/resume are sequenced correctly. Signed-off-by: Ben Zhang --- sound/soc/codecs/nau8825.c | 126 +++++++++++++++++++++++++-------------------- 1 file changed, 71 insertions(+), 55 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 3e7bee2..cb08a35 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -343,9 +343,12 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL, 0), - /* ADC for button press detection */ - SND_SOC_DAPM_ADC("SAR", NULL, NAU8825_REG_SAR_CTRL, - NAU8825_SAR_ADC_EN_SFT, 0), + /* ADC for button press detection. A dapm supply widget is used to + * prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON + * during suspend. + */ + SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL, + NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0), SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0), SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0), @@ -607,6 +610,16 @@ static bool nau8825_is_jack_inserted(struct regmap *regmap) static void nau8825_restart_jack_detection(struct regmap *regmap) { + /* Chip needs one FSCLK cycle in order to generate interrupts, + * as we cannot guarantee one will be provided by the system. Turning + * master mode on then off enables us to generate that FSCLK cycle + * with a minimum of contention on the clock bus. + */ + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); + /* this will restart the entire jack detection process including MIC/GND * switching and create interrupts. We have to go from 0 to 1 and back * to 0 to restart. @@ -728,7 +741,10 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) struct regmap *regmap = nau8825->regmap; int active_irq, clear_irq = 0, event = 0, event_mask = 0; - regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq); + if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) { + dev_err(nau8825->dev, "failed to read irq status\n"); + return IRQ_NONE; + } if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) == NAU8825_JACK_EJECTION_DETECTED) { @@ -1198,33 +1214,74 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec, return ret; } } - - ret = regcache_sync(nau8825->regmap); - if (ret) { - dev_err(codec->dev, - "Failed to sync cache: %d\n", ret); - return ret; - } } - break; case SND_SOC_BIAS_OFF: if (nau8825->mclk_freq) clk_disable_unprepare(nau8825->mclk); - - regcache_mark_dirty(nau8825->regmap); break; } return 0; } +#ifdef CONFIG_PM +static int nau8825_suspend(struct snd_soc_codec *codec) +{ + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + + disable_irq(nau8825->irq); + regcache_cache_only(nau8825->regmap, true); + regcache_mark_dirty(nau8825->regmap); + + return 0; +} + +static int nau8825_resume(struct snd_soc_codec *codec) +{ + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + + /* The chip may lose power and reset in S3. regcache_sync restores + * register values including configurations for sysclk, irq, and + * jack/button detection. + */ + regcache_cache_only(nau8825->regmap, false); + regcache_sync(nau8825->regmap); + + /* Check the jack plug status directly. If the headset is unplugged + * during S3 when the chip has no power, there will be no jack + * detection irq even after the nau8825_restart_jack_detection below, + * because the chip just thinks no headset has ever been plugged in. + */ + if (!nau8825_is_jack_inserted(nau8825->regmap)) { + nau8825_eject_jack(nau8825); + snd_soc_jack_report(nau8825->jack, 0, SND_JACK_HEADSET); + } + + enable_irq(nau8825->irq); + + /* Run jack detection to check the type (OMTP or CTIA) of the headset + * if there is one. This handles the case where a different type of + * headset is plugged in during S3. This triggers an IRQ iff a headset + * is already plugged in. + */ + nau8825_restart_jack_detection(nau8825->regmap); + + return 0; +} +#else +#define nau8825_suspend NULL +#define nau8825_resume NULL +#endif + static struct snd_soc_codec_driver nau8825_codec_driver = { .probe = nau8825_codec_probe, .set_sysclk = nau8825_set_sysclk, .set_pll = nau8825_set_pll, .set_bias_level = nau8825_set_bias_level, .suspend_bias_off = true, + .suspend = nau8825_suspend, + .resume = nau8825_resume, .controls = nau8825_controls, .num_controls = ARRAY_SIZE(nau8825_controls), @@ -1334,16 +1391,6 @@ static int nau8825_setup_irq(struct nau8825 *nau8825) regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR); - /* Chip needs one FSCLK cycle in order to generate interrupts, - * as we cannot guarantee one will be provided by the system. Turning - * master mode on then off enables us to generate that FSCLK cycle - * with a minimum of contention on the clock bus. - */ - regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, - NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); - regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, - NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); - ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL, nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT, "nau8825", nau8825); @@ -1411,36 +1458,6 @@ static int nau8825_i2c_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM_SLEEP -static int nau8825_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct nau8825 *nau8825 = dev_get_drvdata(dev); - - disable_irq(client->irq); - regcache_cache_only(nau8825->regmap, true); - regcache_mark_dirty(nau8825->regmap); - - return 0; -} - -static int nau8825_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct nau8825 *nau8825 = dev_get_drvdata(dev); - - regcache_cache_only(nau8825->regmap, false); - regcache_sync(nau8825->regmap); - enable_irq(client->irq); - - return 0; -} -#endif - -static const struct dev_pm_ops nau8825_pm = { - SET_SYSTEM_SLEEP_PM_OPS(nau8825_suspend, nau8825_resume) -}; - static const struct i2c_device_id nau8825_i2c_ids[] = { { "nau8825", 0 }, { } @@ -1467,7 +1484,6 @@ static struct i2c_driver nau8825_driver = { .name = "nau8825", .of_match_table = of_match_ptr(nau8825_of_ids), .acpi_match_table = ACPI_PTR(nau8825_acpi_match), - .pm = &nau8825_pm, }, .probe = nau8825_i2c_probe, .remove = nau8825_i2c_remove,