[1/2] ASoC: Add ADAU7002 Stereo PDM-to-I2S/TDM Converter DT bindings

Commit Message

Lars-Peter Clausen June 2, 2016, 12:19 p.m. UTC

The ADAU7002 takes a stereo PDM signal (e.g. from two digital microphones)
and converts it into a I2S/TDM PCM stream. The chip does not have a
control interface and has a single power supply that is modeled in the
devicetree.

Signed-off-by: Lars-Peter Clausen <[e-mail]>
---
 .../devicetree/bindings/sound/adi,adau7002.txt        | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/adi,adau7002.txt

Patch

diff --git a/Documentation/devicetree/bindings/sound/adi,adau7002.txt b/Documentation/devicetree/bindings/sound/adi,adau7002.txt
new file mode 100644
index 0000000..f144ee1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau7002.txt
@@ -0,0 +1,19 @@ 
+Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter
+
+Required properties:
+
+ - compatible: Must be "adi,adau7002"
+
+Optional properties:
+
+ - IOVDD-supply: Phandle and specifier for the power supply providing the IOVDD
+	supply as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+
+	If this property is not present it is assumed that the supply pin is
+	hardwired to always on.
+
+Example:
+	adau7002: pdm-to-i2s {
+		compatible = "adi,adau7002";
+		IOVDD-supply = <&supply>;
+	};