[v2,5/8] regulator: helpers: Add regmap set_pull_down helper

Commit Message

Charles Keepax March 28, 2017, 2:14 p.m. UTC

Add a helper function regulator_set_pull_down_regmap to allow regmap
based regulators to easily enable pull down.

Signed-off-by: Charles Keepax <[e-mail]>
---

Turns out I don't actually need this patch for the series, but since I
had gone to the effort of writing the code anyway, thought I might as
well keep it in. Will be useful if someone does want to use a pull down
on a regmap regulators and it is has been pretty well tested here.

Changes since v1:
 - Added documentation for the new regulator_desc fields to the kernel doc.

 drivers/regulator/helpers.c      | 18 ++++++++++++++++++
 include/linux/regulator/driver.h |  8 ++++++++
 2 files changed, 26 insertions(+)

Patch

diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index a75e7da..2ae7c3a 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -464,6 +464,24 @@  int regulator_set_soft_start_regmap(struct regulator_dev *rdev)
 EXPORT_SYMBOL_GPL(regulator_set_soft_start_regmap);
 
 /**
+ * regulator_set_pull_down_regmap - Default set_pull_down() using regmap
+ *
+ * @rdev: device to operate on.
+ */
+int regulator_set_pull_down_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+
+	val = rdev->desc->pull_down_val_on;
+	if (!val)
+		val = rdev->desc->pull_down_mask;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->pull_down_reg,
+				  rdev->desc->pull_down_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_pull_down_regmap);
+
+/**
  * regulator_get_bypass_regmap - Default get_bypass() using regmap
  *
  * @rdev: device to operate on.
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 1054c03..8a9078d 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -296,6 +296,10 @@  enum regulator_type {
  * @soft_start_mask: Mask for control when using regmap set_soft_start
  * @soft_start_val_on: Enabling value for control when using regmap
  *                     set_soft_start
+ * @pull_down_reg: Register for control when using regmap set_pull_down
+ * @pull_down_mask: Mask for control when using regmap set_pull_down
+ * @pull_down_val_on: Enabling value for control when using regmap
+ *                     set_pull_down
  *
  * @enable_time: Time taken for initial enable of regulator (in uS).
  * @off_on_delay: guard time (in uS), before re-enabling a regulator
@@ -352,6 +356,9 @@  struct regulator_desc {
 	unsigned int soft_start_reg;
 	unsigned int soft_start_mask;
 	unsigned int soft_start_val_on;
+	unsigned int pull_down_reg;
+	unsigned int pull_down_mask;
+	unsigned int pull_down_val_on;
 
 	unsigned int enable_time;
 
@@ -484,6 +491,7 @@  int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable);
 int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable);
 int regulator_set_soft_start_regmap(struct regulator_dev *rdev);
+int regulator_set_pull_down_regmap(struct regulator_dev *rdev);
 
 int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
 					  bool enable);