@@ -14,6 +14,8 @@
struct rt5514_platform_data {
unsigned int dmic_init_delay;
+ const char *dsp_calib_clk_name;
+ unsigned int dsp_calib_clk_rate;
};
#endif
@@ -370,6 +370,7 @@ int rt5514_spi_burst_read(unsigned int addr, u8 *rxbuf, size_t len)
return true;
}
+EXPORT_SYMBOL_GPL(rt5514_spi_burst_read);
/**
* rt5514_spi_burst_write - Write data to SPI by rt5514 address.
@@ -295,6 +295,33 @@ static int rt5514_dsp_voice_wake_up_get(struct snd_kcontrol *kcontrol,
return 0;
}
+static int rt5514_calibration(struct rt5514_priv *rt5514, bool on)
+{
+ if (on) {
+ regmap_write(rt5514->regmap, RT5514_ANA_CTRL_PLL3, 0x0000000a);
+ regmap_update_bits(rt5514->regmap, RT5514_PLL_SOURCE_CTRL, 0xf,
+ 0xa);
+ regmap_update_bits(rt5514->regmap, RT5514_PWR_ANA1, 0x301,
+ 0x301);
+ regmap_write(rt5514->regmap, RT5514_PLL3_CALIB_CTRL4,
+ 0x80000000 | rt5514->pll3_cal_value);
+ regmap_write(rt5514->regmap, RT5514_PLL3_CALIB_CTRL1,
+ 0x8bb80800);
+ regmap_update_bits(rt5514->regmap, RT5514_PLL3_CALIB_CTRL5,
+ 0xc0000000, 0x80000000);
+ regmap_update_bits(rt5514->regmap, RT5514_PLL3_CALIB_CTRL5,
+ 0xc0000000, 0xc0000000);
+ } else {
+ regmap_update_bits(rt5514->regmap, RT5514_PLL3_CALIB_CTRL5,
+ 0xc0000000, 0x40000000);
+ regmap_update_bits(rt5514->regmap, RT5514_PWR_ANA1, 0x301, 0);
+ regmap_update_bits(rt5514->regmap, RT5514_PLL_SOURCE_CTRL, 0xf,
+ 0x4);
+ }
+
+ return 0;
+}
+
static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -302,6 +329,7 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol,
struct rt5514_priv *rt5514 = snd_soc_component_get_drvdata(component);
struct snd_soc_codec *codec = rt5514->codec;
const struct firmware *fw = NULL;
+ u8 buf[8];
if (ucontrol->value.integer.value[0] == rt5514->dsp_enabled)
return 0;
@@ -310,6 +338,35 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol,
rt5514->dsp_enabled = ucontrol->value.integer.value[0];
if (rt5514->dsp_enabled) {
+ if (rt5514->pdata.dsp_calib_clk_name &&
+ !IS_ERR(rt5514->dsp_calib_clk)) {
+ if (clk_set_rate(rt5514->dsp_calib_clk,
+ rt5514->pdata.dsp_calib_clk_rate))
+ dev_err(codec->dev,
+ "Can't set rate for mclk");
+
+ if (clk_prepare_enable(rt5514->dsp_calib_clk))
+ dev_err(codec->dev,
+ "Can't enable dsp_calib_clk");
+
+ rt5514_calibration(rt5514, true);
+
+ msleep(20);
+#if IS_ENABLED(CONFIG_SND_SOC_RT5514_SPI)
+ rt5514_spi_burst_read(RT5514_PLL3_CALIB_CTRL6 |
+ RT5514_DSP_MAPPING,
+ (u8 *)&buf, sizeof(buf));
+#else
+ dev_err(codec->dev, "There is no SPI driver for"
+ " loading the firmware\n");
+#endif
+ rt5514->pll3_cal_value = buf[0] | buf[1] << 8 |
+ buf[2] << 16 | buf[3] << 24;
+
+ rt5514_calibration(rt5514, false);
+ clk_disable_unprepare(rt5514->dsp_calib_clk);
+ }
+
rt5514_enable_dsp_prepare(rt5514);
request_firmware(&fw, RT5514_FIRMWARE1, codec->dev);
@@ -341,6 +398,20 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol,
/* DSP run */
regmap_write(rt5514->i2c_regmap, 0x18002f00,
0x00055148);
+
+ if (rt5514->pdata.dsp_calib_clk_name &&
+ !IS_ERR(rt5514->dsp_calib_clk)) {
+ msleep(20);
+
+ regmap_write(rt5514->i2c_regmap, 0x1800211c,
+ rt5514->pll3_cal_value);
+ regmap_write(rt5514->i2c_regmap, 0x18002124,
+ 0x00220012);
+ regmap_write(rt5514->i2c_regmap, 0x18002124,
+ 0x80220042);
+ regmap_write(rt5514->i2c_regmap, 0x18002124,
+ 0xe0220042);
+ }
} else {
regmap_multi_reg_write(rt5514->i2c_regmap,
rt5514_i2c_patch, ARRAY_SIZE(rt5514_i2c_patch));
@@ -1024,12 +1095,22 @@ static int rt5514_set_bias_level(struct snd_soc_codec *codec,
static int rt5514_probe(struct snd_soc_codec *codec)
{
struct rt5514_priv *rt5514 = snd_soc_codec_get_drvdata(codec);
+ struct platform_device *pdev = container_of(codec->dev,
+ struct platform_device, dev);
rt5514->mclk = devm_clk_get(codec->dev, "mclk");
if (PTR_ERR(rt5514->mclk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
+ if (rt5514->pdata.dsp_calib_clk_name) {
+ rt5514->dsp_calib_clk = devm_clk_get(&pdev->dev,
+ rt5514->pdata.dsp_calib_clk_name);
+ if (PTR_ERR(rt5514->dsp_calib_clk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ }
+
rt5514->codec = codec;
+ rt5514->pll3_cal_value = 0x0078b000;
return 0;
}
@@ -1147,6 +1228,10 @@ static int rt5514_parse_dp(struct rt5514_priv *rt5514, struct device *dev)
{
device_property_read_u32(dev, "realtek,dmic-init-delay-ms",
&rt5514->pdata.dmic_init_delay);
+ device_property_read_string(dev, "realtek,dsp-calib-clk-name",
+ &rt5514->pdata.dsp_calib_clk_name);
+ device_property_read_u32(dev, "realtek,dsp-calib-clk-rate",
+ &rt5514->pdata.dsp_calib_clk_rate);
return 0;
}
@@ -34,7 +34,9 @@
#define RT5514_CLK_CTRL1 0x2104
#define RT5514_CLK_CTRL2 0x2108
#define RT5514_PLL3_CALIB_CTRL1 0x2110
+#define RT5514_PLL3_CALIB_CTRL4 0x2120
#define RT5514_PLL3_CALIB_CTRL5 0x2124
+#define RT5514_PLL3_CALIB_CTRL6 0x2128
#define RT5514_DELAY_BUF_CTRL1 0x2140
#define RT5514_DELAY_BUF_CTRL3 0x2148
#define RT5514_ASRC_IN_CTRL1 0x2180
@@ -272,7 +274,7 @@ struct rt5514_priv {
struct rt5514_platform_data pdata;
struct snd_soc_codec *codec;
struct regmap *i2c_regmap, *regmap;
- struct clk *mclk;
+ struct clk *mclk, *dsp_calib_clk;
int sysclk;
int sysclk_src;
int lrck;
@@ -281,6 +283,7 @@ struct rt5514_priv {
int pll_in;
int pll_out;
int dsp_enabled;
+ unsigned int pll3_cal_value;
};
#endif /* __RT5514_H__ */
Add the option for the DSP clock that can be calibrated by the other clock source. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> --- include/sound/rt5514.h | 2 + sound/soc/codecs/rt5514-spi.c | 1 + sound/soc/codecs/rt5514.c | 85 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt5514.h | 5 ++- 4 files changed, 92 insertions(+), 1 deletion(-)