@@ -650,3 +650,354 @@ static int sdw_initialize_slave(struct sdw_slave *slave)
return 0;
}
+
+static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status)
+{
+ u8 clear = 0, impl_int_mask;
+ int status, ret, count = 0;
+
+ status = sdw_read(slave, SDW_DP0_INT);
+ if (status < 0) {
+ dev_err(slave->bus->dev,
+ "SDW_DP0_INT read failed:%d", status);
+ return status;
+ }
+
+ do {
+
+ if (status & SDW_DP0_INT_TEST_FAIL) {
+ dev_err(&slave->dev, "Test fail for port 0");
+ clear |= SDW_DP0_INT_TEST_FAIL;
+ }
+
+ /*
+ * Assumption: PORT_READY interrupt will be received only for
+ * ports implementing Channel Prepare state machine (CP_SM)
+ */
+
+ if (status & SDW_DP0_INT_PORT_READY) {
+ complete(&slave->port_ready[0]);
+ clear |= SDW_DP0_INT_PORT_READY;
+ }
+
+ if (status & SDW_DP0_INT_BRA_FAILURE) {
+ dev_err(&slave->dev, "BRA failed");
+ clear |= SDW_DP0_INT_BRA_FAILURE;
+ }
+
+ impl_int_mask = SDW_DP0_INT_IMPDEF1 |
+ SDW_DP0_INT_IMPDEF2 | SDW_DP0_INT_IMPDEF3;
+
+ if (status & impl_int_mask) {
+ clear |= impl_int_mask;
+ *slave_status = clear;
+ }
+
+ /* clear the interrupt */
+ ret = sdw_write(slave, SDW_DP0_INT, clear);
+ if (ret < 0) {
+ dev_err(slave->bus->dev,
+ "SDW_DP0_INT write failed:%d", ret);
+ return ret;
+ }
+
+ /* Read DP0 interrupt again */
+ status = sdw_read(slave, SDW_DP0_INT);
+ if (status < 0) {
+ dev_err(slave->bus->dev,
+ "SDW_DP0_INT read failed:%d", status);
+ return status;
+ }
+
+ count++;
+
+ /* we can get alerts while processing so keep retrying */
+ } while (status != 0 && count < SDW_READ_INTR_CLEAR_RETRY);
+
+ if (count == SDW_READ_INTR_CLEAR_RETRY)
+ dev_warn(slave->bus->dev, "Reached MAX_RETRY on DP0 read");
+
+ return ret;
+}
+
+static int sdw_handle_port_interrupt(struct sdw_slave *slave,
+ int port, u8 *slave_status)
+{
+ u8 clear = 0, impl_int_mask;
+ int status, ret, count = 0;
+ u32 addr;
+
+ if (port == 0)
+ return sdw_handle_dp0_interrupt(slave, slave_status);
+
+ addr = SDW_DPN_INT(port);
+ status = sdw_read(slave, addr);
+ if (status < 0) {
+ dev_err(slave->bus->dev,
+ "SDW_DPN_INT read failed:%d", status);
+
+ return status;
+ }
+
+ do {
+
+ if (status & SDW_DPN_INT_TEST_FAIL) {
+ dev_err(&slave->dev, "Test fail for port:%d", port);
+ clear |= SDW_DPN_INT_TEST_FAIL;
+ }
+
+ /*
+ * Assumption: PORT_READY interrupt will be received only
+ * for ports implementing CP_SM.
+ */
+ if (status & SDW_DPN_INT_PORT_READY) {
+ complete(&slave->port_ready[port]);
+ clear |= SDW_DPN_INT_PORT_READY;
+ }
+
+ impl_int_mask = SDW_DPN_INT_IMPDEF1 |
+ SDW_DPN_INT_IMPDEF2 | SDW_DPN_INT_IMPDEF3;
+
+
+ if (status & impl_int_mask) {
+ clear |= impl_int_mask;
+ *slave_status = clear;
+ }
+
+ /* clear the interrupt */
+ ret = sdw_write(slave, addr, clear);
+ if (ret < 0) {
+ dev_err(slave->bus->dev,
+ "SDW_DPN_INT write failed:%d", ret);
+ return ret;
+ }
+
+ /* Read DPN interrupt again */
+ status = sdw_read(slave, addr);
+ if (status < 0) {
+ dev_err(slave->bus->dev,
+ "SDW_DPN_INT read failed:%d", status);
+ return status;
+ }
+
+ count++;
+
+ /* we can get alerts while processing so keep retrying */
+ } while (status != 0 && count < SDW_READ_INTR_CLEAR_RETRY);
+
+ if (count == SDW_READ_INTR_CLEAR_RETRY)
+ dev_warn(slave->bus->dev, "Reached MAX_RETRY on port read");
+
+ return ret;
+}
+
+static int sdw_handle_slave_alerts(struct sdw_slave *slave)
+{
+ u8 clear = 0, bit, port_status[15];
+ int port_num, stat, ret, count = 0;
+ unsigned long port;
+ bool slave_notify = false;
+ u8 buf[3];
+
+ sdw_modify_slave_status(slave, SDW_SLAVE_ALERT);
+
+ /* Read Instat 1, Instat 2 and Instat 3 registers */
+ ret = sdw_nread(slave, SDW_SCP_INT1, 3, buf);
+ if (ret < 0) {
+ dev_err(slave->bus->dev,
+ "SDW_SCP_INT1 read failed:%d", ret);
+ return ret;
+ }
+
+ do {
+ /*
+ * Check parity, bus clash and Slave (impl defined)
+ * interrupt
+ */
+ if (buf[0] & SDW_SCP_INT1_PARITY) {
+ dev_err(&slave->dev, "Parity error detected");
+ clear |= SDW_SCP_INT1_PARITY;
+ }
+
+ if (buf[0] & SDW_SCP_INT1_BUS_CLASH) {
+ dev_err(&slave->dev, "Bus clash error detected");
+ clear |= SDW_SCP_INT1_BUS_CLASH;
+ }
+
+ /*
+ * When bus clash or parity errors are detected, such errors
+ * are unlikely to be recoverable errors.
+ * TODO: In such scenario, reset bus. Make this configurable
+ * via sysfs property with bus reset being the default.
+ */
+
+ if (buf[0] & SDW_SCP_INT1_IMPL_DEF) {
+ dev_dbg(&slave->dev, "Slave impl defined interrupt\n");
+ clear |= SDW_SCP_INT1_IMPL_DEF;
+ slave_notify = true;
+ }
+
+ /* Check port 0 - 4 interrupts */
+ port = buf[0] & SDW_SCP_INT1_PORT0_3;
+
+ /* To get port number corresponding to bits, shift it */
+ port = port >> SDW_REG_SHIFT(SDW_SCP_INT1_PORT0_3);
+ for_each_set_bit(bit, &port, 8) {
+ sdw_handle_port_interrupt(slave, bit,
+ &port_status[bit]);
+
+ }
+
+ /* Check if cascade 2 interrupt is present */
+ if (buf[0] & SDW_SCP_INT1_SCP2_CASCADE) {
+ port = buf[1] & SDW_SCP_INTSTAT2_PORT4_10;
+ for_each_set_bit(bit, &port, 8) {
+ /* scp2 ports start from 4 */
+ port_num = bit + 3;
+ sdw_handle_port_interrupt(slave,
+ port_num,
+ &port_status[port_num]);
+ }
+ }
+
+ /* now check last cascade */
+ if (buf[1] & SDW_SCP_INTSTAT2_SCP3_CASCADE) {
+ port = buf[2] & SDW_SCP_INTSTAT3_PORT11_14;
+ for_each_set_bit(bit, &port, 8) {
+ /* scp3 ports start from 11 */
+ port_num = bit + 10;
+ sdw_handle_port_interrupt(slave,
+ port_num,
+ &port_status[port_num]);
+ }
+ }
+
+ /* Update the Slave driver */
+ if (slave_notify && (slave->ops) &&
+ (slave->ops->interrupt_callback)) {
+ struct sdw_slave_intr_status slave_intr;
+
+ slave_intr.control_port = clear;
+ memcpy(slave_intr.port, &port_status,
+ sizeof(slave_intr.port));
+
+ slave->ops->interrupt_callback(slave, &slave_intr);
+ }
+
+ /* Ack interrupt */
+ ret = sdw_write(slave, SDW_SCP_INT1, clear);
+ if (ret < 0) {
+ dev_err(slave->bus->dev,
+ "SDW_SCP_INT1 write failed:%d", ret);
+ return ret;
+ }
+
+ /*
+ * Read status again to ensure no new interrupts arrived
+ * while servicing interrupts
+ */
+ ret = sdw_nread(slave, SDW_SCP_INT1, 3, buf);
+ if (ret < 0) {
+ dev_err(slave->bus->dev,
+ "SDW_SCP_INT1 read failed:%d", ret);
+ return ret;
+ }
+
+ /* Make sure no interrupts are pending */
+ stat = buf[0] || buf[1] || buf[2];
+
+ /*
+ * Exit loop if Slave is continuously in ALERT state even
+ * after servicing the interrupt multiple times.
+ */
+ count++;
+
+ /* we can get alerts while processing so keep retrying */
+ } while (stat != 0 && count < SDW_READ_INTR_CLEAR_RETRY);
+
+ if (count == SDW_READ_INTR_CLEAR_RETRY)
+ dev_warn(slave->bus->dev, "Reached MAX_RETRY on alert read");
+
+ return ret;
+}
+
+static int sdw_update_slave_status(struct sdw_slave *slave,
+ enum sdw_slave_status status)
+{
+ if ((slave->ops) && (slave->ops->update_status))
+ return slave->ops->update_status(slave, status);
+
+ return 0;
+}
+
+/**
+ * sdw_handle_slave_status() - Handle Slave status
+ * @bus: SDW bus instance
+ * @status: Status for all Slave(s)
+ */
+int sdw_handle_slave_status(struct sdw_bus *bus,
+ enum sdw_slave_status status[])
+{
+ struct sdw_slave *slave;
+ int i, ret = 0;
+
+ if (status[0] == SDW_SLAVE_ATTACHED) {
+ ret = sdw_program_device_num(bus);
+ if (ret)
+ dev_err(bus->dev, "Slave attach failed: %d", ret);
+ }
+
+ /* Continue to check other slave statuses */
+ for (i = 1; i <= SDW_MAX_DEVICES; i++) {
+ mutex_lock(&bus->bus_lock);
+ if (test_bit(i, bus->assigned) == false) {
+ mutex_unlock(&bus->bus_lock);
+ continue;
+ }
+ mutex_unlock(&bus->bus_lock);
+
+ slave = sdw_get_slave(bus, i);
+ if (!slave)
+ continue;
+
+ switch (status[i]) {
+ case SDW_SLAVE_UNATTACHED:
+ if (slave->status == SDW_SLAVE_UNATTACHED)
+ break;
+
+ sdw_modify_slave_status(slave, SDW_SLAVE_UNATTACHED);
+ break;
+
+ case SDW_SLAVE_ALERT:
+ ret = sdw_handle_slave_alerts(slave);
+ if (ret)
+ dev_err(bus->dev,
+ "Slave %d alert handling failed: %d",
+ i, ret);
+ break;
+
+ case SDW_SLAVE_ATTACHED:
+ if (slave->status == SDW_SLAVE_ATTACHED)
+ break;
+
+ sdw_initialize_slave(slave);
+ sdw_modify_slave_status(slave, SDW_SLAVE_ATTACHED);
+
+ break;
+
+ default:
+ dev_err(bus->dev, "Invalid slave %d status:%d",
+ i, status[i]);
+ break;
+ }
+
+ ret = sdw_update_slave_status(slave, status[i]);
+ if (ret)
+ dev_err(slave->bus->dev,
+ "Update Slave status failed:%d", ret);
+
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(sdw_handle_slave_status);
@@ -94,6 +94,8 @@ struct sdw_msg {
bool page;
};
+#define SDW_READ_INTR_CLEAR_RETRY 10
+
int sdw_transfer(struct sdw_bus *bus, struct sdw_slave *slave,
struct sdw_msg *msg);
int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_slave *slave,
@@ -371,11 +371,28 @@ struct sdw_slave_id {
};
/**
+ * struct sdw_slave_intr_status - Slave interrupt status
+ * @control_port: control port status
+ * @port: data port status
+ */
+struct sdw_slave_intr_status {
+ u8 control_port;
+ u8 port[14];
+};
+
+/**
* struct sdw_slave_ops - Slave driver callback ops
* @read_prop: Read Slave properties
+ * @interrupt_callback: Device interrupt notification (invoked in thread
+ * context)
+ * @update_status: Update Slave status
*/
struct sdw_slave_ops {
int (*read_prop)(struct sdw_slave *sdw);
+ int (*interrupt_callback)(struct sdw_slave *slave,
+ struct sdw_slave_intr_status *status);
+ int (*update_status)(struct sdw_slave *slave,
+ enum sdw_slave_status status);
};
/**
@@ -432,6 +449,9 @@ struct sdw_driver {
int __sdw_register_driver(struct sdw_driver *drv, struct module *);
void sdw_unregister_driver(struct sdw_driver *drv);
+int sdw_handle_slave_status(struct sdw_bus *bus,
+ enum sdw_slave_status status[]);
+
/*
* SDW master structures and APIs
*/