From patchwork Wed Dec 13 06:34:26 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolin Chen X-Patchwork-Id: 10109311 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id A1F36602C2 for ; Wed, 13 Dec 2017 06:36:51 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 9A53B28CEF for ; Wed, 13 Dec 2017 06:36:51 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 8ECF228D36; Wed, 13 Dec 2017 06:36:51 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.8 required=2.0 tests=BAYES_00, DKIM_ADSP_CUSTOM_MED, DKIM_SIGNED, FREEMAIL_FROM, RCVD_IN_DNSWL_NONE, T_DKIM_INVALID autolearn=no version=3.3.1 Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 4453228CEF for ; Wed, 13 Dec 2017 06:36:49 +0000 (UTC) Received: from alsa0.perex.cz (localhost [127.0.0.1]) by alsa0.perex.cz (Postfix) with ESMTP id A3C23267843; Wed, 13 Dec 2017 07:35:45 +0100 (CET) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa0.perex.cz (Postfix, from userid 1000) id 4E922267841; Wed, 13 Dec 2017 07:35:44 +0100 (CET) Received: from mail-pf0-f179.google.com (mail-pf0-f179.google.com [209.85.192.179]) by alsa0.perex.cz (Postfix) with ESMTP id 40CF726781A for ; Wed, 13 Dec 2017 07:35:36 +0100 (CET) Received: by mail-pf0-f179.google.com with SMTP id j28so927489pfk.8 for ; Tue, 12 Dec 2017 22:35:36 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=+mWgnz957iUuNJSztDuEWHEkdPOIK6rCq8Zg5fW1eV4=; b=E9R5bISQNc1JjluaTdtOGQ7W2bEyobb+CNxr49Ihfh/hYaKKysvmW78K2spO50Yu7x tq5hUWNKYR+ZxPDI2L9TsUdoM08uCRnyAuCee8DUurvgcO7Vh1caf3FJTSLgU/EtQgAJ rguz3o1/VkdaBsOFGz1AN0U+wWnsYFKZzfh8mrfgxEMP2FDOerwIRYymCWLLo4rMLTwC 6PPwJu0G+rOBfI+pMLHUP7lZnqJloEeJx8Z7f9SXu8xl6ofttIhJ5g5udq/CtDB86hAi 6HVhlB0HQO+sVtjV7ZRi9kTljDGJATsZk9SDXjN+i2NLmpUD1WU6ajP7di77/3B4ygXl wrjA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=+mWgnz957iUuNJSztDuEWHEkdPOIK6rCq8Zg5fW1eV4=; b=dmAnWjNulMGzdb2zPlmvlhcULxbs7EgK2loXDgichhJAQoDClmh8RsNzNb+/lzzRmH VeDPhUzL8eOyUJiEzXLBG3N0jN1VuxJwz4O35qd8YPM3CUBVmvZu1IHsuWBeveFiiquh etXcANjtKwb5p5/rEwMFXsyaHhaDv5qkLHm6T59rrQdI8U9gj/KcuTtQdcOMafc+KW+T D9pDdSkO5xK+7/NE6gd9wacVSb3CStWnTSb9is5adWriQz2ZImX/Fk31T7L02VYL8VwF OJIAYGPya27MNLkDv0oB7+dUMUiH1qQ33dIw1iJX4mL/ijYZ9B+EEuCRX8YLbQUBdxsI CFhA== X-Gm-Message-State: AKGB3mKnzUERT3KyTzEBZ7oweBGAbyzxzRcop94kSGzvTWw/RJGXAAuo SvqqPTIfhdvmQaKZSbEIepI= X-Google-Smtp-Source: ACJfBovWcwqC0iFjD6c1tRKn0un0t4nfQKoJuDCYYnfk3+9TfHMZPpOkiHN6i7bpMAFxvfZB71dDEw== X-Received: by 10.98.80.208 with SMTP id g77mr4977253pfj.201.1513146934961; Tue, 12 Dec 2017 22:35:34 -0800 (PST) Received: from Asurada-CZ80.localdomain (c-73-231-2-134.hsd1.ca.comcast.net. [73.231.2.134]) by smtp.gmail.com with ESMTPSA id m63sm1574900pfj.80.2017.12.12.22.35.33 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Tue, 12 Dec 2017 22:35:34 -0800 (PST) From: Nicolin Chen To: broonie@kernel.org Date: Tue, 12 Dec 2017 22:34:26 -0800 Message-Id: <1513146874-25476-4-git-send-email-nicoleotsuka@gmail.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1513146874-25476-1-git-send-email-nicoleotsuka@gmail.com> References: <1513146874-25476-1-git-send-email-nicoleotsuka@gmail.com> Cc: alsa-devel@alsa-project.org, kernel@pengutronix.de, lgirdwood@gmail.com, timur@tabi.org, caleb@crome.org, linux-kernel@vger.kernel.org, arnaud.mouiche@invoxia.com, lukma@denx.de, fabio.estevam@nxp.com, mail@maciej.szmigiero.name, linuxppc-dev@lists.ozlabs.org Subject: [alsa-devel] [PATCH v2 03/11] ASoC: fsl_ssi: Refine all comments X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org X-Virus-Scanned: ClamAV using ClamSMTP This patch refines the comments by: 1) Removing all out-of-date comments 2) Removing all not-so-useful comments 3) Unifying the styles of all comments 4) Simplifying over-descriptive comments 5) Adding comments to improve code readablity 6) Moving all register related comments to fsl_ssi.h 7) Adding comments to all register and field defines Signed-off-by: Nicolin Chen --- Changelog v1->v2 * Added some new comments at "SoC specific data" to be more precise. * Revised one comment in fsl_ssi_config(). * Revised the comment of fsl_ssi_setup_reg_vals(). * Added one comment for AC97 in fsl_ssi_setup_reg_vals(). * Revised the comment of fsl_ssi_hw_params() to be more precise. * Added some comments in _fsl_ssi_set_dai_fmt() to help understand the formats. * Added one comment in fsl_ssi_set_dai_fmt() to state why AC97 needs to bypass it. * Revised comments in fsl_ssi_set_dai_tdm_slot() to be more precise. * Revised comments around dual FIFO code in fsl_ssi_imx_probe() to be more precise. sound/soc/fsl/fsl_ssi.c | 376 ++++++++++++++------------------------------ sound/soc/fsl/fsl_ssi.h | 67 +++++++- sound/soc/fsl/fsl_ssi_dbg.c | 12 +- 3 files changed, 188 insertions(+), 267 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index e903c92..796a7ea 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -187,42 +187,48 @@ struct fsl_ssi_soc_data { /** * fsl_ssi: per-SSI private data * - * @reg: Pointer to the regmap registers + * @regs: Pointer to the regmap registers * @irq: IRQ of this SSI * @cpu_dai_drv: CPU DAI driver for this device * * @dai_fmt: DAI configuration this device is currently used with - * @i2s_mode: i2s and network mode configuration of the device. Is used to - * switch between normal and i2s/network mode - * mode depending on the number of channels + * @i2s_mode: I2S and Network mode configuration of SCR register * @use_dma: DMA is used or FIQ with stream filter - * @use_dual_fifo: DMA with support for both FIFOs used - * @fifo_deph: Depth of the SSI FIFOs - * @slot_width: width of each DAI slot - * @slots: number of slots - * @rxtx_reg_val: Specific register settings for receive/transmit configuration + * @use_dual_fifo: DMA with support for dual FIFO mode + * @has_ipg_clk_name: If "ipg" is in the clock name list of device tree + * @fifo_depth: Depth of the SSI FIFOs + * @slot_width: Width of each DAI slot + * @slots: Number of slots + * @rxtx_reg_val: Specific RX/TX register settings * - * @clk: SSI clock - * @baudclk: SSI baud clock for master mode + * @clk: Clock source to access register + * @baudclk: Clock source to generate bit and frame-sync clocks * @baudclk_streams: Active streams that are using baudclk * + * @regcache_sfcsr: Cache sfcsr register value during suspend and resume + * @regcache_sacnt: Cache sacnt register value during suspend and resume + * * @dma_params_tx: DMA transmit parameters * @dma_params_rx: DMA receive parameters * @ssi_phys: physical address of the SSI registers * * @fiq_params: FIQ stream filtering parameters * - * @pdev: Pointer to pdev used for deprecated fsl-ssi sound card + * @pdev: Pointer to pdev when using fsl-ssi as sound card (ppc only) + * TODO: Should be replaced with simple-sound-card * * @dbg_stats: Debugging statistics * * @soc: SoC specific data + * @dev: Pointer to &pdev->dev + * + * @fifo_watermark: The FIFO watermark setting. Notifies DMA when there are + * @fifo_watermark or fewer words in TX fifo or + * @fifo_watermark or more empty words in RX fifo. + * @dma_maxburst: Max number of words to transfer in one go. So far, + * this is always the same as fifo_watermark. * - * @fifo_watermark: the FIFO watermark setting. Notifies DMA when - * there are @fifo_watermark or fewer words in TX fifo or - * @fifo_watermark or more empty words in RX fifo. - * @dma_maxburst: max number of words to transfer in one go. So far, - * this is always the same as fifo_watermark. + * @ac97_reg_lock: Mutex lock to serialize AC97 register access operations */ struct fsl_ssi { struct regmap *regs; @@ -243,20 +249,15 @@ struct fsl_ssi { struct clk *baudclk; unsigned int baudclk_streams; - /* regcache for volatile regs */ u32 regcache_sfcsr; u32 regcache_sacnt; - /* DMA params */ struct snd_dmaengine_dai_dma_data dma_params_tx; struct snd_dmaengine_dai_dma_data dma_params_rx; dma_addr_t ssi_phys; - /* params for non-dma FIQ stream filtered mode */ struct imx_pcm_fiq_params fiq_params; - /* Used when using fsl-ssi as sound-card. This is only used by ppc and - * should be replaced with simple-sound-card. */ struct platform_device *pdev; struct fsl_ssi_dbg dbg_stats; @@ -271,19 +272,19 @@ struct fsl_ssi { }; /* - * imx51 and later SoCs have a slightly different IP that allows the - * SSI configuration while the SSI unit is running. - * - * More important, it is necessary on those SoCs to configure the - * sperate TX/RX DMA bits just before starting the stream - * (fsl_ssi_trigger). The SDMA unit has to be configured before fsl_ssi - * sends any DMA requests to the SDMA unit, otherwise it is not defined - * how the SDMA unit handles the DMA request. + * SoC specific data * - * SDMA units are present on devices starting at imx35 but the imx35 - * reference manual states that the DMA bits should not be changed - * while the SSI unit is running (SSIEN). So we support the necessary - * online configuration of fsl-ssi starting at imx51. + * Notes: + * 1) SSI in earlier SoCS has crtical bits in control registers that + * cannot be changed after SSI starts running -- a software reset + * (set SSIEN to 0) is required to change their values. So adding + * an offline_config flag for these SoCs. + * 2) SDMA is available since imx35. However, imx35 does not support + * DMA bits changing when SSI is running, so set offline_config. + * 3) imx51 and later versions support register configurations when + * SSI is running (SSIEN); For these versions, DMA needs to be + * configured before SSI sends DMA request to avoid an undefined + * DMA request on the SDMA side. */ static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = { @@ -342,18 +343,7 @@ static bool fsl_ssi_is_i2s_cbm_cfs(struct fsl_ssi *ssi) return (ssi->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) == SND_SOC_DAIFMT_CBM_CFS; } -/** - * fsl_ssi_isr: SSI interrupt handler - * - * Although it's possible to use the interrupt handler to send and receive - * data to/from the SSI, we use the DMA instead. Programming is more - * complicated, but the performance is much better. - * - * This interrupt handler is used only to gather statistics. - * - * @irq: IRQ of the SSI device - * @dev_id: pointer to the fsl_ssi structure for this SSI device - */ + static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) { struct fsl_ssi *ssi = dev_id; @@ -361,10 +351,6 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) __be32 sisr; __be32 sisr2; - /* We got an interrupt, so read the status register to see what we - were interrupted for. We mask it with the Interrupt Enable register - so that we only check for events that we're interested in. - */ regmap_read(regs, CCSR_SSI_SISR, &sisr); sisr2 = sisr & ssi->soc->sisr_write_mask; @@ -377,8 +363,8 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) return IRQ_HANDLED; } -/* - * Enable/Disable all rx/tx config flags at once. +/** + * Enable or disable all rx/tx config flags at once */ static void fsl_ssi_rxtx_config(struct fsl_ssi *ssi, bool enable) { @@ -405,13 +391,8 @@ static void fsl_ssi_rxtx_config(struct fsl_ssi *ssi, bool enable) } } -/* - * Clear RX or TX FIFO to remove samples from the previous - * stream session which may be still present in the FIFO and - * may introduce bad samples and/or channel slipping. - * - * Note: The SOR is not documented in recent IMX datasheet, but - * is described in IMX51 reference manual at section 56.3.3.15. +/** + * Clear remaining data in the FIFO to avoid dirty data or channel slipping */ static void fsl_ssi_fifo_clear(struct fsl_ssi *ssi, bool is_rx) { @@ -424,7 +405,7 @@ static void fsl_ssi_fifo_clear(struct fsl_ssi *ssi, bool is_rx) } } -/* +/** * Calculate the bits that have to be disabled for the current stream that is * getting disabled. This keeps the bits enabled that are necessary for the * second stream to work if 'stream_active' is true. @@ -444,9 +425,8 @@ static void fsl_ssi_fifo_clear(struct fsl_ssi *ssi, bool is_rx) ((vals_disable) & \ ((vals_disable) ^ ((vals_stream) * (u32)!!(stream_active)))) -/* - * Enable/Disable a ssi configuration. You have to pass either - * ssi->rxtx_reg_val.rx or tx as vals parameter. +/** + * Enable or disable SSI configuration. */ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable, struct fsl_ssi_reg_val *vals) @@ -467,24 +447,23 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable, else keep_active = 0; - /* Find the other direction values rx or tx which we do not want to - * modify */ + /* Get the opposite direction to keep its values untouched */ if (&ssi->rxtx_reg_val.rx == vals) avals = &ssi->rxtx_reg_val.tx; else avals = &ssi->rxtx_reg_val.rx; - /* If vals should be disabled, start with disabling the unit */ if (!enable) { + /* Exclude necessary bits for the opposite stream */ u32 scr = fsl_ssi_disable_val(vals->scr, avals->scr, keep_active); + /* Safely disable SCR register for the stream */ regmap_update_bits(regs, CCSR_SSI_SCR, scr, 0); } /* - * We are running on a SoC which does not support online SSI - * reconfiguration, so we have to enable all necessary flags at once - * even if we do not use them later (capture and playback configuration) + * Online configuration is not supported + * Enable or Disable all necessary bits at once */ if (ssi->soc->offline_config) { if ((enable && !nr_active_streams) || @@ -494,10 +473,7 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable, goto config_done; } - /* - * Configure single direction units while the SSI unit is running - * (online configuration) - */ + /* Online configure single direction while SSI is running */ if (enable) { fsl_ssi_fifo_clear(ssi, vals->scr & CCSR_SSI_SCR_RE); @@ -509,16 +485,7 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable, u32 srcr; u32 stcr; - /* - * Disabling the necessary flags for one of rx/tx while the - * other stream is active is a little bit more difficult. We - * have to disable only those flags that differ between both - * streams (rx XOR tx) and that are set in the stream that is - * disabled now. Otherwise we could alter flags of the other - * stream - */ - - /* These assignments are simply vals without bits set in avals*/ + /* Exclude necessary bits for the opposite stream */ sier = fsl_ssi_disable_val(vals->sier, avals->sier, keep_active); srcr = fsl_ssi_disable_val(vals->srcr, avals->srcr, @@ -526,6 +493,7 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable, stcr = fsl_ssi_disable_val(vals->stcr, avals->stcr, keep_active); + /* Safely disable other control registers for the stream */ regmap_update_bits(regs, CCSR_SSI_SRCR, srcr, 0); regmap_update_bits(regs, CCSR_SSI_STCR, stcr, 0); regmap_update_bits(regs, CCSR_SSI_SIER, sier, 0); @@ -534,26 +502,17 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable, config_done: /* Enabling of subunits is done after configuration */ if (enable) { + /* Start DMA before setting TE to avoid underrun */ + /* TODO: FIQ cases might also need this upon testing */ if (ssi->use_dma && (vals->scr & CCSR_SSI_SCR_TE)) { - /* - * Be sure the Tx FIFO is filled when TE is set. - * Otherwise, there are some chances to start the - * playback with some void samples inserted first, - * generating a channel slip. - * - * First, SSIEN must be set, to let the FIFO be filled. - * - * Notes: - * - Limit this fix to the DMA case until FIQ cases can - * be tested. - * - Limit the length of the busy loop to not lock the - * system too long, even if 1-2 loops are sufficient - * in general. - */ int i; int max_loop = 100; + + /* Enable SSI first to send TX DMA request */ regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN, CCSR_SSI_SCR_SSIEN); + + /* Wait until TX FIFO not empty -- DMA working */ for (i = 0; i < max_loop; i++) { u32 sfcsr; regmap_read(regs, CCSR_SSI_SFCSR, &sfcsr); @@ -565,6 +524,7 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable, "Timeout waiting TX FIFO filling\n"); } } + /* Enable all remaining bits */ regmap_update_bits(regs, CCSR_SSI_SCR, vals->scr, vals->scr); } } @@ -581,20 +541,9 @@ static void fsl_ssi_tx_ac97_saccst_setup(struct fsl_ssi *ssi) /* no SACC{ST,EN,DIS} regs on imx21-class SSI */ if (!ssi->soc->imx21regs) { - /* - * Note that these below aren't just normal registers. - * They are a way to disable or enable bits in SACCST - * register: - * - writing a '1' bit at some position in SACCEN sets the - * relevant bit in SACCST, - * - writing a '1' bit at some position in SACCDIS unsets - * the relevant bit in SACCST register. - * - * The two writes below first disable all channels slots, - * then enable just slots 3 & 4 ("PCM Playback Left Channel" - * and "PCM Playback Right Channel"). - */ + /* Disable all channel slots */ regmap_write(regs, CCSR_SSI_SACCDIS, 0xff); + /* Enable slots 3 & 4 -- PCM Playback Left & Right channels */ regmap_write(regs, CCSR_SSI_SACCEN, 0x300); } } @@ -602,23 +551,11 @@ static void fsl_ssi_tx_ac97_saccst_setup(struct fsl_ssi *ssi) static void fsl_ssi_tx_config(struct fsl_ssi *ssi, bool enable) { /* - * Why are we setting up SACCST everytime we are starting a - * playback? - * Some CODECs (like VT1613 CODEC on UDOO board) like to - * (sometimes) set extra bits in their SLOTREQ requests. - * When a bit is set in a SLOTREQ request then SSI sets the - * relevant bit in SACCST automatically (it is enough if a bit was - * set in a SLOTREQ just once, bits in SACCST are 'sticky'). - * If an extra slot gets enabled that's a disaster for playback - * because some of normal left or right channel samples are - * redirected instead to this extra slot. + * SACCST might be modified via AC Link by a CODEC if it sends + * extra bits in their SLOTREQ requests, which'll accidentally + * send valid data to slots other than normal playback slots. * - * A workaround implemented in fsl-asoc-card of setting an - * appropriate CODEC register so that slots 3 & 4 (the normal - * stereo playback slots) are used for S/PDIF seems to mostly fix - * this issue on the UDOO board but since this CODEC is so - * untrustworthy let's play safe here and make sure that no extra - * slots are enabled every time a playback is started. + * To be safe, configure SACCST right before TX starts. */ if (enable && fsl_ssi_is_ac97(ssi)) fsl_ssi_tx_ac97_saccst_setup(ssi); @@ -626,10 +563,8 @@ static void fsl_ssi_tx_config(struct fsl_ssi *ssi, bool enable) fsl_ssi_config(ssi, enable, &ssi->rxtx_reg_val.tx); } -/* - * Setup rx/tx register values used to enable/disable the streams. These will - * be used later in fsl_ssi_config to setup the streams without the need to - * check for all different SSI modes. +/** + * Cache critical bits of SIER, SRCR, STCR and SCR to later set them safely */ static void fsl_ssi_setup_reg_vals(struct fsl_ssi *ssi) { @@ -642,6 +577,7 @@ static void fsl_ssi_setup_reg_vals(struct fsl_ssi *ssi) reg->tx.stcr = CCSR_SSI_STCR_TFEN0; reg->tx.scr = 0; + /* AC97 has already enabled SSIEN, RE and TE, so ignore them */ if (!fsl_ssi_is_ac97(ssi)) { reg->rx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE; reg->tx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE; @@ -663,24 +599,17 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi *ssi) { struct regmap *regs = ssi->regs; - /* - * Setup the clock control register - */ + /* Setup the clock control register */ regmap_write(regs, CCSR_SSI_STCCR, CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13)); regmap_write(regs, CCSR_SSI_SRCCR, CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13)); - /* - * Enable AC97 mode and startup the SSI - */ + /* Enable AC97 mode and startup the SSI */ regmap_write(regs, CCSR_SSI_SACNT, CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV); - /* - * Enable SSI, Transmit and Receive. AC97 has to communicate with the - * codec before a stream is started. - */ + /* AC97 has to communicate with codec before starting a stream */ regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE); @@ -688,14 +617,6 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi *ssi) regmap_write(regs, CCSR_SSI_SOR, CCSR_SSI_SOR_WAIT(3)); } -/** - * fsl_ssi_startup: create a new substream - * - * This is the first function called when a stream is opened. - * - * If this is the first stream open, then grab the IRQ and program most of - * the SSI registers. - */ static int fsl_ssi_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -707,7 +628,8 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, if (ret) return ret; - /* When using dual fifo mode, it is safer to ensure an even period + /* + * When using dual fifo mode, it is safer to ensure an even period * size. If appearing to an odd number while DMA always starts its * task from fifo0, fifo1 would be neglected at the end of each * period. But SSI would still access fifo1 with an invalid data. @@ -719,10 +641,6 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, return 0; } -/** - * fsl_ssi_shutdown: shutdown the SSI - * - */ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -734,7 +652,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream, } /** - * fsl_ssi_set_bclk - configure Digital Audio Interface bit clock + * Configure Digital Audio Interface bit clock * * Note: This function can be only called when using SSI as DAI master * @@ -851,17 +769,15 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, } /** - * fsl_ssi_hw_params - program the sample size - * - * Most of the SSI registers have been programmed in the startup function, - * but the word length must be programmed here. Unfortunately, programming - * the SxCCR.WL bits requires the SSI to be temporarily disabled. This can - * cause a problem with supporting simultaneous playback and capture. If - * the SSI is already playing a stream, then that stream may be temporarily - * stopped when you start capture. + * Configure SSI based on PCM hardware parameters * - * Note: The SxCCR.DC and SxCCR.PM bits are only used if the SSI is the - * clock master. + * Notes: + * 1) SxCCR.WL bits are critical bits that require SSI to be temporarily + * disabled on offline_config SoCs. Even for online configurable SoCs + * running in synchronous mode (both TX and RX use STCCR), it is not + * safe to re-configure them when both two streams start running. + * 2) SxCCR.PM, SxCCR.DIV2 and SxCCR.PSR bits will be configured in the + * fsl_ssi_set_bclk() if SSI is the DAI clock master. */ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params, struct snd_soc_dai *cpu_dai) @@ -878,10 +794,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, regmap_read(regs, CCSR_SSI_SCR, &scr_val); enabled = scr_val & CCSR_SSI_SCR_SSIEN; - /* - * If we're in synchronous mode, and the SSI is already enabled, - * then STCCR is already set properly. - */ + /* To support simultaneous TX and RX, bypass it if SSI is enabled */ if (enabled && ssi->cpu_dai_drv.symmetric_rates) return 0; @@ -902,10 +815,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, if (!fsl_ssi_is_ac97(ssi)) { u8 i2smode; - /* - * Switch to normal net mode in order to have a frame sync - * signal every 32 bits instead of 16 bits - */ + /* Normal + Network mode to send 16-bit data in 32-bit frames */ if (fsl_ssi_is_i2s_cbm_cfs(ssi) && sample_size == 16) i2smode = CCSR_SSI_SCR_I2S_MODE_NORMAL | CCSR_SSI_SCR_NET; @@ -917,16 +827,6 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, channels == 1 ? 0 : i2smode); } - /* - * FIXME: The documentation says that SxCCR[WL] should not be - * modified while the SSI is enabled. The only time this can - * happen is if we're trying to do simultaneous playback and - * capture in asynchronous mode. Unfortunately, I have been enable - * to get that to work at all on the P1022DS. Therefore, we don't - * bother to disable/enable the SSI when setting SxCCR[WL], because - * the SSI will stop anyway. Maybe one day, this will get fixed. - */ - /* In synchronous mode, the SSI uses STCCR for capture */ if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) || ssi->cpu_dai_drv.symmetric_rates) @@ -972,6 +872,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, regmap_read(regs, CCSR_SSI_SCR, &scr); scr &= ~(CCSR_SSI_SCR_SYN | CCSR_SSI_SCR_I2S_MODE_MASK); + /* Synchronize frame sync clock for TE to avoid data slipping */ scr |= CCSR_SSI_SCR_SYNC_TX_FS; mask = CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFDIR | CCSR_SSI_STCR_TXDIR | @@ -982,6 +883,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, stcr &= ~mask; srcr &= ~mask; + /* Use Network mode as default */ ssi->i2s_mode = CCSR_SSI_SCR_NET; switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: @@ -1022,6 +924,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, CCSR_SSI_STCR_TXBIT0; break; case SND_SOC_DAIFMT_AC97: + /* Data on falling edge of bclk, frame high, 1clk before data */ ssi->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_NORMAL; break; default: @@ -1054,13 +957,16 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, /* DAI clock master masks */ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: + /* Output bit and frame sync clocks */ strcr |= CCSR_SSI_STCR_TFDIR | CCSR_SSI_STCR_TXDIR; scr |= CCSR_SSI_SCR_SYS_CLK_EN; break; case SND_SOC_DAIFMT_CBM_CFM: + /* Input bit or frame sync clocks */ scr &= ~CCSR_SSI_SCR_SYS_CLK_EN; break; case SND_SOC_DAIFMT_CBM_CFS: + /* Input bit clock but output frame sync clock */ strcr &= ~CCSR_SSI_STCR_TXDIR; strcr |= CCSR_SSI_STCR_TFDIR; scr &= ~CCSR_SSI_SCR_SYS_CLK_EN; @@ -1073,8 +979,8 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, stcr |= strcr; srcr |= strcr; + /* Set SYN mode and clear RXDIR bit when using SYN or AC97 mode */ if (ssi->cpu_dai_drv.symmetric_rates || fsl_ssi_is_ac97(ssi)) { - /* Need to clear RXDIR when using SYNC or AC97 mode */ srcr &= ~CCSR_SSI_SRCR_RXDIR; scr |= CCSR_SSI_SCR_SYN; } @@ -1106,12 +1012,13 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, } /** - * fsl_ssi_set_dai_fmt - configure Digital Audio Interface Format. + * Configure Digital Audio Interface (DAI) Format */ static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) { struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai); + /* AC97 configured DAIFMT earlier in the probe() */ if (fsl_ssi_is_ac97(ssi)) return 0; @@ -1119,9 +1026,7 @@ static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) } /** - * fsl_ssi_set_dai_tdm_slot - set TDM slot number - * - * Note: This function can be only called when using SSI as DAI master + * Set TDM slot number and slot width */ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, u32 rx_mask, int slots, int slot_width) @@ -1149,17 +1054,17 @@ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, regmap_update_bits(regs, CCSR_SSI_SRCCR, CCSR_SSI_SxCCR_DC_MASK, CCSR_SSI_SxCCR_DC(slots)); - /* The register SxMSKs needs SSI to provide essential clock due to - * hardware design. So we here temporarily enable SSI to set them. - */ + /* Save SSIEN bit of the SCR register */ regmap_read(regs, CCSR_SSI_SCR, &val); val &= CCSR_SSI_SCR_SSIEN; + /* Temporarily enable SSI to allow SxMSKs to be configurable */ regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN, CCSR_SSI_SCR_SSIEN); regmap_write(regs, CCSR_SSI_STMSK, ~tx_mask); regmap_write(regs, CCSR_SSI_SRMSK, ~rx_mask); + /* Restore the value of SSIEN bit */ regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN, val); ssi->slot_width = slot_width; @@ -1169,13 +1074,7 @@ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, } /** - * fsl_ssi_trigger: start and stop the DMA transfer. - * - * This function is called by ALSA to start, stop, pause, and resume the DMA - * transfer of data. - * - * The DMA channel is in external master start and pause mode, which - * means the SSI completely controls the flow of data. + * Start or stop SSI and corresponding DMA transaction. */ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai) @@ -1207,6 +1106,7 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, return -EINVAL; } + /* Clear corresponding FIFO */ if (fsl_ssi_is_ac97(ssi)) { if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) regmap_write(regs, CCSR_SSI_SOR, CCSR_SSI_SOR_TX_CLR); @@ -1239,7 +1139,6 @@ static const struct snd_soc_dai_ops fsl_ssi_dai_ops = { .trigger = fsl_ssi_trigger, }; -/* Template for the CPU dai driver structure */ static struct snd_soc_dai_driver fsl_ssi_dai_template = { .probe = fsl_ssi_dai_probe, .playback = { @@ -1383,6 +1282,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, u32 dmas[4]; int ret; + /* Backward compatible for a DT without ipg clock name assigned */ if (ssi->has_ipg_clk_name) ssi->clk = devm_clk_get(dev, "ipg"); else @@ -1393,6 +1293,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, return ret; } + /* Enable the clock since regmap will not handle it in this case */ if (!ssi->has_ipg_clk_name) { ret = clk_prepare_enable(ssi->clk); if (ret) { @@ -1401,9 +1302,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, } } - /* For those SLAVE implementations, we ignore non-baudclk cases - * and, instead, abandon MASTER mode that needs baud clock. - */ + /* Do not error out for slave cases that live without a baud clock */ ssi->baudclk = devm_clk_get(dev, "baud"); if (IS_ERR(ssi->baudclk)) dev_dbg(dev, "could not get baud clock: %ld\n", @@ -1414,25 +1313,20 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, ssi->dma_params_tx.addr = ssi->ssi_phys + CCSR_SSI_STX0; ssi->dma_params_rx.addr = ssi->ssi_phys + CCSR_SSI_SRX0; + /* Set to dual FIFO mode according to the SDMA sciprt */ ret = of_property_read_u32_array(np, "dmas", dmas, 4); if (ssi->use_dma && !ret && dmas[2] == IMX_DMATYPE_SSI_DUAL) { ssi->use_dual_fifo = true; - /* When using dual fifo mode, we need to keep watermark - * as even numbers due to dma script limitation. + /* + * Use even numbers to avoid channel swap due to SDMA + * script design */ ssi->dma_params_tx.maxburst &= ~0x1; ssi->dma_params_rx.maxburst &= ~0x1; } if (!ssi->use_dma) { - - /* - * Some boards use an incompatible codec. To get it - * working, we are using imx-fiq-pcm-audio, that - * can handle those codecs. DMA is not possible in this - * situation. - */ - + /* Use imx-fiq-pcm-audio for codec incompatible with DMA */ ssi->fiq_params.irq = ssi->irq; ssi->fiq_params.base = iomem; ssi->fiq_params.dma_params_rx = &ssi->dma_params_rx; @@ -1490,12 +1384,14 @@ static int fsl_ssi_probe(struct platform_device *pdev) ssi->soc = of_id->data; ssi->dev = dev; + /* Check if being used in AC97 mode */ sprop = of_get_property(np, "fsl,mode", NULL); if (sprop) { if (!strcmp(sprop, "ac97-slave")) ssi->dai_fmt = SND_SOC_DAIFMT_AC97; } + /* Select DMA or FIQ */ ssi->use_dma = !of_property_read_bool(np, "fsl,fiq-stream-filter"); if (fsl_ssi_is_ac97(ssi)) { @@ -1504,7 +1400,6 @@ static int fsl_ssi_probe(struct platform_device *pdev) fsl_ac97_data = ssi; } else { - /* Initialize this copy of the CPU DAI driver structure */ memcpy(&ssi->cpu_dai_drv, &fsl_ssi_dai_template, sizeof(fsl_ssi_dai_template)); } @@ -1517,10 +1412,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) ssi->ssi_phys = res->start; if (ssi->soc->imx21regs) { - /* - * According to datasheet imx21-class SSI - * don't have SACC{ST,EN,DIS} regs. - */ + /* No SACC{ST,EN,DIS} regs in imx21-class SSI */ regconfig.max_register = CCSR_SSI_SRMSK; regconfig.num_reg_defaults_raw = CCSR_SSI_SRMSK / sizeof(uint32_t) + 1; @@ -1546,7 +1438,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) return ssi->irq; } - /* Are the RX and the TX clocks locked? */ + /* Set software limitations for synchronous mode */ if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) { if (!fsl_ssi_is_ac97(ssi)) { ssi->cpu_dai_drv.symmetric_rates = 1; @@ -1556,50 +1448,28 @@ static int fsl_ssi_probe(struct platform_device *pdev) ssi->cpu_dai_drv.symmetric_channels = 1; } - /* Determine the FIFO depth. */ + /* Fetch FIFO depth; Set to 8 for older DT without this property */ iprop = of_get_property(np, "fsl,fifo-depth", NULL); if (iprop) ssi->fifo_depth = be32_to_cpup(iprop); else - /* Older 8610 DTs didn't have the fifo-depth property */ ssi->fifo_depth = 8; /* - * Set the watermark for transmit FIFO 0 and receive FIFO 0. We don't - * use FIFO 1 but set the watermark appropriately nontheless. - * We program the transmit water to signal a DMA transfer - * if there are N elements left in the FIFO. For chips with 15-deep - * FIFOs, set watermark to 8. This allows the SSI to operate at a - * high data rate without channel slipping. Behavior is unchanged - * for the older chips with a fifo depth of only 8. A value of 4 - * might be appropriate for the older chips, but is left at - * fifo_depth-2 until sombody has a chance to test. + * Configure TX and RX DMA watermarks. * - * We set the watermark on the same level as the DMA burstsize. For - * fiq it is probably better to use the biggest possible watermark - * size. + * Values should be tested to avoid FIFO under/over run. Set maxburst + * to fifo_watermark to maxiumize DMA transaction to reduce overhead. */ switch (ssi->fifo_depth) { case 15: - /* - * 2 samples is not enough when running at high data - * rates (like 48kHz @ 16 bits/channel, 16 channels) - * 8 seems to split things evenly and leave enough time - * for the DMA to fill the FIFO before it's over/under - * run. - */ + /* Tested with cases running at 48kHz @ 16 bits x 16 channels */ ssi->fifo_watermark = 8; ssi->dma_maxburst = 8; break; case 8: default: - /* - * maintain old behavior for older chips. - * Keeping it the same because I don't have an older - * board to test with. - * I suspect this could be changed to be something to - * leave some more space in the fifo. - */ + /* Use old watermark configurations for older chips */ ssi->fifo_watermark = ssi->fifo_depth - 2; ssi->dma_maxburst = ssi->fifo_depth - 2; break; @@ -1642,18 +1512,14 @@ static int fsl_ssi_probe(struct platform_device *pdev) if (ret) goto error_asoc_register; - /* - * If codec-handle property is missing from SSI node, we assume - * that the machine driver uses new binding which does not require - * SSI driver to trigger machine driver's probe. - */ + /* Bypass it if using newer DT bindings of ASoC machine drivers */ if (!of_get_property(np, "codec-handle", NULL)) goto done; - /* Trigger the machine driver's probe function. The platform driver - * name of the machine driver is taken from /compatible property of the - * device tree. We also pass the address of the CPU DAI driver - * structure. + /* + * Backward compatible for older bindings by manually triggering the + * machine driver's probe(). Use /compatible property, including the + * address of CPU DAI driver structure, as the name of machine driver. */ sprop = of_get_property(of_find_node_by_path("/"), "compatible", NULL); /* Sometimes the compatible name has a "fsl," prefix, so we strip it. */ diff --git a/sound/soc/fsl/fsl_ssi.h b/sound/soc/fsl/fsl_ssi.h index 5065105..1ad3bde 100644 --- a/sound/soc/fsl/fsl_ssi.h +++ b/sound/soc/fsl/fsl_ssi.h @@ -1,5 +1,5 @@ /* - * fsl_ssi.h - ALSA SSI interface for the Freescale MPC8610 SoC + * fsl_ssi.h - ALSA SSI interface for the Freescale MPC8610 and i.MX SoC * * Author: Timur Tabi * @@ -12,31 +12,75 @@ #ifndef _MPC8610_I2S_H #define _MPC8610_I2S_H -/* SSI registers */ +/* -- SSI Register Map -- */ + +/* SSI Transmit Data Register 0 */ #define CCSR_SSI_STX0 0x00 +/* SSI Transmit Data Register 1 */ #define CCSR_SSI_STX1 0x04 +/* SSI Receive Data Register 0 */ #define CCSR_SSI_SRX0 0x08 +/* SSI Receive Data Register 1 */ #define CCSR_SSI_SRX1 0x0c +/* SSI Control Register */ #define CCSR_SSI_SCR 0x10 +/* SSI Interrupt Status Register */ #define CCSR_SSI_SISR 0x14 +/* SSI Interrupt Enable Register */ #define CCSR_SSI_SIER 0x18 +/* SSI Transmit Configuration Register */ #define CCSR_SSI_STCR 0x1c +/* SSI Receive Configuration Register */ #define CCSR_SSI_SRCR 0x20 +/* SSI Transmit Clock Control Register */ #define CCSR_SSI_STCCR 0x24 +/* SSI Receive Clock Control Register */ #define CCSR_SSI_SRCCR 0x28 +/* SSI FIFO Control/Status Register */ #define CCSR_SSI_SFCSR 0x2c +/* + * SSI Test Register (Intended for debugging purposes only) + * + * Note: STR is not documented in recent IMX datasheet, but + * is described in IMX51 reference manual at section 56.3.3.14 + */ #define CCSR_SSI_STR 0x30 +/* + * SSI Option Register (Intended for internal use only) + * + * Note: SOR is not documented in recent IMX datasheet, but + * is described in IMX51 reference manual at section 56.3.3.15 + */ #define CCSR_SSI_SOR 0x34 +/* SSI AC97 Control Register */ #define CCSR_SSI_SACNT 0x38 +/* SSI AC97 Command Address Register */ #define CCSR_SSI_SACADD 0x3c +/* SSI AC97 Command Data Register */ #define CCSR_SSI_SACDAT 0x40 +/* SSI AC97 Tag Register */ #define CCSR_SSI_SATAG 0x44 +/* SSI Transmit Time Slot Mask Register */ #define CCSR_SSI_STMSK 0x48 +/* SSI Receive Time Slot Mask Register */ #define CCSR_SSI_SRMSK 0x4c +/* + * SSI AC97 Channel Status Register + * + * The status could be changed by: + * 1) Writing a '1' bit at some position in SACCEN sets relevant bit in SACCST + * 2) Writing a '1' bit at some position in SACCDIS unsets the relevant bit + * 3) Receivng a '1' in SLOTREQ bit from external CODEC via AC Link + */ #define CCSR_SSI_SACCST 0x50 +/* SSI AC97 Channel Enable Register -- Set bits in SACCST */ #define CCSR_SSI_SACCEN 0x54 +/* SSI AC97 Channel Disable Register -- Clear bits in SACCST */ #define CCSR_SSI_SACCDIS 0x58 +/* -- SSI Register Field Maps -- */ + +/* SSI Control Register -- CCSR_SSI_SCR 0x10 */ #define CCSR_SSI_SCR_SYNC_TX_FS 0x00001000 #define CCSR_SSI_SCR_RFR_CLK_DIS 0x00000800 #define CCSR_SSI_SCR_TFR_CLK_DIS 0x00000400 @@ -52,6 +96,7 @@ #define CCSR_SSI_SCR_TE 0x00000002 #define CCSR_SSI_SCR_SSIEN 0x00000001 +/* SSI Interrupt Status Register -- CCSR_SSI_SISR 0x14 */ #define CCSR_SSI_SISR_RFRC 0x01000000 #define CCSR_SSI_SISR_TFRC 0x00800000 #define CCSR_SSI_SISR_CMDAU 0x00040000 @@ -74,6 +119,7 @@ #define CCSR_SSI_SISR_TFE1 0x00000002 #define CCSR_SSI_SISR_TFE0 0x00000001 +/* SSI Interrupt Enable Register -- CCSR_SSI_SIER 0x18 */ #define CCSR_SSI_SIER_RFRC_EN 0x01000000 #define CCSR_SSI_SIER_TFRC_EN 0x00800000 #define CCSR_SSI_SIER_RDMAE 0x00400000 @@ -100,6 +146,7 @@ #define CCSR_SSI_SIER_TFE1_EN 0x00000002 #define CCSR_SSI_SIER_TFE0_EN 0x00000001 +/* SSI Transmit Configuration Register -- CCSR_SSI_STCR 0x1C */ #define CCSR_SSI_STCR_TXBIT0 0x00000200 #define CCSR_SSI_STCR_TFEN1 0x00000100 #define CCSR_SSI_STCR_TFEN0 0x00000080 @@ -111,6 +158,7 @@ #define CCSR_SSI_STCR_TFSL 0x00000002 #define CCSR_SSI_STCR_TEFS 0x00000001 +/* SSI Receive Configuration Register -- CCSR_SSI_SRCR 0x20 */ #define CCSR_SSI_SRCR_RXEXT 0x00000400 #define CCSR_SSI_SRCR_RXBIT0 0x00000200 #define CCSR_SSI_SRCR_RFEN1 0x00000100 @@ -123,7 +171,10 @@ #define CCSR_SSI_SRCR_RFSL 0x00000002 #define CCSR_SSI_SRCR_REFS 0x00000001 -/* STCCR and SRCCR */ +/* + * SSI Transmit Clock Control Register -- CCSR_SSI_STCCR 0x24 + * SSI Receive Clock Control Register -- CCSR_SSI_SRCCR 0x28 + */ #define CCSR_SSI_SxCCR_DIV2_SHIFT 18 #define CCSR_SSI_SxCCR_DIV2 0x00040000 #define CCSR_SSI_SxCCR_PSR_SHIFT 17 @@ -142,9 +193,10 @@ ((((x) - 1) << CCSR_SSI_SxCCR_PM_SHIFT) & CCSR_SSI_SxCCR_PM_MASK) /* - * The xFCNT bits are read-only, and the xFWM bits are read/write. Use the - * CCSR_SSI_SFCSR_xFCNTy() macros to read the FIFO counters, and use the - * CCSR_SSI_SFCSR_xFWMy() macros to set the watermarks. + * SSI FIFO Control/Status Register -- CCSR_SSI_SFCSR 0x2c + * + * Tx or Rx FIFO Counter -- CCSR_SSI_SFCSR_xFCNTy Read-Only + * Tx or Rx FIFO Watermarks -- CCSR_SSI_SFCSR_xFWMy Read/Write */ #define CCSR_SSI_SFCSR_RFCNT1_SHIFT 28 #define CCSR_SSI_SFCSR_RFCNT1_MASK 0xF0000000 @@ -179,6 +231,7 @@ #define CCSR_SSI_SFCSR_TFWM0(x) \ (((x) << CCSR_SSI_SFCSR_TFWM0_SHIFT) & CCSR_SSI_SFCSR_TFWM0_MASK) +/* SSI Test Register -- CCSR_SSI_STR 0x30 */ #define CCSR_SSI_STR_TEST 0x00008000 #define CCSR_SSI_STR_RCK2TCK 0x00004000 #define CCSR_SSI_STR_RFS2TFS 0x00002000 @@ -188,6 +241,7 @@ #define CCSR_SSI_STR_TFS2RFS 0x00000020 #define CCSR_SSI_STR_TXSTATE(x) ((x) & 0x1F) +/* SSI Option Register -- CCSR_SSI_SOR 0x34 */ #define CCSR_SSI_SOR_CLKOFF 0x00000040 #define CCSR_SSI_SOR_RX_CLR 0x00000020 #define CCSR_SSI_SOR_TX_CLR 0x00000010 @@ -197,6 +251,7 @@ #define CCSR_SSI_SOR_WAIT(x) (((x) & 3) << CCSR_SSI_SOR_WAIT_SHIFT) #define CCSR_SSI_SOR_SYNRST 0x00000001 +/* SSI AC97 Control Register -- CCSR_SSI_SACNT 0x38 */ #define CCSR_SSI_SACNT_FRDIV(x) (((x) & 0x3f) << 5) #define CCSR_SSI_SACNT_WR 0x00000010 #define CCSR_SSI_SACNT_RD 0x00000008 diff --git a/sound/soc/fsl/fsl_ssi_dbg.c b/sound/soc/fsl/fsl_ssi_dbg.c index 5469ffb..9c7fa6c 100644 --- a/sound/soc/fsl/fsl_ssi_dbg.c +++ b/sound/soc/fsl/fsl_ssi_dbg.c @@ -82,9 +82,10 @@ void fsl_ssi_dbg_isr(struct fsl_ssi_dbg *dbg, u32 sisr) dbg->stats.tfe0++; } -/* Show the statistics of a flag only if its interrupt is enabled. The - * compiler will optimze this code to a no-op if the interrupt is not - * enabled. +/** + * Show the statistics of a flag only if its interrupt is enabled + * + * Compilers will optimze it to a no-op if the interrupt is disabled */ #define SIER_SHOW(flag, name) \ do { \ @@ -94,10 +95,9 @@ void fsl_ssi_dbg_isr(struct fsl_ssi_dbg *dbg, u32 sisr) /** - * fsl_sysfs_ssi_show: display SSI statistics + * Display the statistics for the current SSI device * - * Display the statistics for the current SSI device. To avoid confusion, - * we only show those counts that are enabled. + * To avoid confusion, only show those counts that are enabled */ static int fsl_ssi_stats_show(struct seq_file *s, void *unused) {