[v2,3/3] ASoC: amd: enabling bt i2s config after acp reset

Commit Message

Vijendar Mukunda April 18, 2018, 11:04 a.m. UTC

On ST/CZ based platforms, for specific platform bt uart
mux to be defined for bt i2s.
By default, these pins will be used for uart.
After acp reset , it requires to reprogram bt i2s config
mux pins to enable bt i2s instance.
added bt i2s enablement sequence during acp init.

Signed-off-by: Vijendar Mukunda <[e-mail]>
Signed-off-by: Akshu Agrawal <[e-mail]>
---
v1->v2: fixed kbuild errors
 sound/soc/amd/acp-da7219-max98357a.c | 2 ++
 sound/soc/amd/acp-pcm-dma.c          | 9 +++++++++
 sound/soc/amd/acp.h                  | 1 +
 3 files changed, 12 insertions(+)

Patch

diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c
index b205c78..9ff2138 100644
--- a/sound/soc/amd/acp-da7219-max98357a.c
+++ b/sound/soc/amd/acp-da7219-max98357a.c
@@ -44,6 +44,7 @@ 
 
 static struct snd_soc_jack cz_jack;
 struct clk *da7219_dai_clk;
+extern int bt_pad_enable;
 
 static int cz_da7219_init(struct snd_soc_pcm_runtime *rtd)
 {
@@ -251,6 +252,7 @@  static int cz_probe(struct platform_device *pdev)
 				cz_card.name, ret);
 		return ret;
 	}
+	bt_pad_enable = device_property_read_bool(&pdev->dev, "bt-pad-enable");
 	return 0;
 }
 
diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 7c392fe..b52c660 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -46,6 +46,8 @@ 
 
 #define DRV_NAME "acp_audio_dma"
 
+bool bt_pad_enable = false;
+EXPORT_SYMBOL(bt_pad_enable);
 
 static const struct snd_pcm_hardware acp_pcm_hardware_playback = {
 	.info = SNDRV_PCM_INFO_INTERLEAVED |
@@ -525,6 +527,13 @@  static int acp_init(void __iomem *acp_mmio, u32 asic_type)
 	val &= ~ACP_SOFT_RESET__SoftResetAud_MASK;
 	acp_reg_write(val, acp_mmio, mmACP_SOFT_RESET);
 
+	/* For BT instance change pins from UART to BT */
+	if (bt_pad_enable) {
+		val = acp_reg_read(acp_mmio, mmACP_BT_UART_PAD_SEL);
+		val |= ACP_BT_UART_PAD_SELECT_MASK;
+		acp_reg_write(val, acp_mmio, mmACP_BT_UART_PAD_SEL);
+	}
+
 	/* initiailize Onion control DAGB register */
 	acp_reg_write(ACP_ONION_CNTL_DEFAULT, acp_mmio,
 		      mmACP_AXI2DAGB_ONION_CNTL);
diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h
index 95c39a3..520a08f 100644
--- a/sound/soc/amd/acp.h
+++ b/sound/soc/amd/acp.h
@@ -110,6 +110,7 @@ 
 #define ACP_I2S_MIC_16BIT_RESOLUTION_EN 0x01
 #define ACP_I2S_SP_16BIT_RESOLUTION_EN	0x02
 #define ACP_I2S_BT_16BIT_RESOLUTION_EN	0x04
+#define ACP_BT_UART_PAD_SELECT_MASK	0x1
 
 enum acp_dma_priority_level {
 	/* 0x0 Specifies the DMA channel is given normal priority */