[v5,9/9] soundwire: intel: Add pre/post bank switch ops

Commit Message

Shreyas NC July 5, 2018, 11:46 a.m. UTC

To support multi link on Intel platforms, we need to update
SDW SHIM registers.

So, add pre/post bank switch ops for the same in Intel driver.

Signed-off-by: Sanyog Kale <[e-mail]>
Signed-off-by: Vinod Koul <[e-mail]>
Signed-off-by: Shreyas NC <[e-mail]>
---
 drivers/soundwire/intel.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

Patch

diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index 0a8990e..da7f91f 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -398,6 +398,69 @@  static int intel_config_stream(struct sdw_intel *sdw,
 }
 
 /*
+ * bank switch routines
+ */
+
+static int intel_pre_bank_switch(struct sdw_bus *bus)
+{
+	struct sdw_cdns *cdns = bus_to_cdns(bus);
+	struct sdw_intel *sdw = cdns_to_intel(cdns);
+	void __iomem *shim = sdw->res->shim;
+	int sync_reg;
+
+	/* Write to register only for multi-link */
+	if (!bus->multi_link)
+		return 0;
+
+	/* Read SYNC register */
+	sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
+	sync_reg |= SDW_SHIM_SYNC_CMDSYNC << sdw->instance;
+	intel_writel(shim, SDW_SHIM_SYNC, sync_reg);
+
+	return 0;
+}
+
+static int intel_post_bank_switch(struct sdw_bus *bus)
+{
+	struct sdw_cdns *cdns = bus_to_cdns(bus);
+	struct sdw_intel *sdw = cdns_to_intel(cdns);
+	void __iomem *shim = sdw->res->shim;
+	int sync_reg, ret;
+
+	/* Write to register only for multi-link */
+	if (!bus->multi_link)
+		return 0;
+
+	/* Read SYNC register */
+	sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
+
+	/*
+	 * post_bank_switch() ops is called from the bus in loop for
+	 * all the Masters in the steam with the expectation that
+	 * we trigger the bankswitch for the only first Master in the list
+	 * and do nothing for the other Masters
+	 *
+	 * So, set the SYNCGO bit only if CMDSYNC bit is set for any Master.
+	 */
+	if (!(sync_reg & SDW_SHIM_SYNC_CMDSYNC_MASK))
+		return 0;
+
+	/*
+	 * Set SyncGO bit to synchronously trigger a bank switch for
+	 * all the masters. A write to SYNCGO bit clears CMDSYNC bit for all
+	 * the Masters.
+	 */
+	sync_reg |= SDW_SHIM_SYNC_SYNCGO;
+
+	ret = intel_clear_bit(shim, SDW_SHIM_SYNC, sync_reg,
+					SDW_SHIM_SYNC_SYNCGO);
+	if (ret < 0)
+		dev_err(sdw->cdns.dev, "Post bank switch failed: %d", ret);
+
+	return ret;
+}
+
+/*
  * DAI routines
  */
 
@@ -750,6 +813,8 @@  static struct sdw_master_ops sdw_intel_ops = {
 	.xfer_msg_defer = cdns_xfer_msg_defer,
 	.reset_page_addr = cdns_reset_page_addr,
 	.set_bus_conf = cdns_bus_conf,
+	.pre_bank_switch = intel_pre_bank_switch,
+	.post_bank_switch = intel_post_bank_switch,
 };
 
 /*