[v2,3/3] ASoC: mediatek: mt8183: fix tdm out data is valid on rising edge

Commit Message

Jiaxin Yu Aug. 24, 2019, 4:37 a.m. UTC

This patch correct tdm out bck inverse register to AUDIO_TOP_CON3[3].

Signed-off-by: Jiaxin Yu <[e-mail]>
---
 sound/soc/mediatek/mt8183/mt8183-dai-tdm.c | 4 +++-
 sound/soc/mediatek/mt8183/mt8183-reg.h     | 8 +++++---
 2 files changed, 8 insertions(+), 4 deletions(-)

Patch

diff --git a/sound/soc/mediatek/mt8183/mt8183-dai-tdm.c b/sound/soc/mediatek/mt8183/mt8183-dai-tdm.c
index d34cabdbf889..0d69cf440407 100644
--- a/sound/soc/mediatek/mt8183/mt8183-dai-tdm.c
+++ b/sound/soc/mediatek/mt8183/mt8183-dai-tdm.c
@@ -505,7 +505,9 @@  static int mtk_dai_tdm_hw_params(struct snd_pcm_substream *substream,
 
 	/* set tdm */
 	if (tdm_priv->bck_invert)
-		tdm_con |= 1 << BCK_INVERSE_SFT;
+		regmap_update_bits(afe->regmap, AUDIO_TOP_CON3,
+				   BCK_INVERSE_MASK_SFT,
+				   0x1 << BCK_INVERSE_SFT);
 
 	if (tdm_priv->lck_invert)
 		tdm_con |= 1 << LRCK_INVERSE_SFT;
diff --git a/sound/soc/mediatek/mt8183/mt8183-reg.h b/sound/soc/mediatek/mt8183/mt8183-reg.h
index e0482f2826da..e544a09e1913 100644
--- a/sound/soc/mediatek/mt8183/mt8183-reg.h
+++ b/sound/soc/mediatek/mt8183/mt8183-reg.h
@@ -413,6 +413,11 @@ 
 #define AFE_MAX_REGISTER AFE_GENERAL2_ASRC_2CH_CON13
 #define AFE_IRQ_STATUS_BITS 0x1fff
 
+/* AUDIO_TOP_CON3 */
+#define BCK_INVERSE_SFT                              3
+#define BCK_INVERSE_MASK                             0x1
+#define BCK_INVERSE_MASK_SFT                         (0x1 << 3)
+
 /* AFE_DAC_CON0 */
 #define AWB2_ON_SFT                                   29
 #define AWB2_ON_MASK                                  0x1
@@ -1596,9 +1601,6 @@ 
 #define TDM_EN_SFT                                    0
 #define TDM_EN_MASK                                   0x1
 #define TDM_EN_MASK_SFT                               (0x1 << 0)
-#define BCK_INVERSE_SFT                               1
-#define BCK_INVERSE_MASK                              0x1
-#define BCK_INVERSE_MASK_SFT                          (0x1 << 1)
 #define LRCK_INVERSE_SFT                              2
 #define LRCK_INVERSE_MASK                             0x1
 #define LRCK_INVERSE_MASK_SFT                         (0x1 << 2)