From patchwork Fri Aug 14 10:53:08 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rohit Kumar X-Patchwork-Id: 11714359 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B6CC813B1 for ; Fri, 14 Aug 2020 11:02:12 +0000 (UTC) Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 493422078D for ; Fri, 14 Aug 2020 11:02:12 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=alsa-project.org header.i=@alsa-project.org header.b="JoiSP7wP"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="Et1re8xm" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 493422078D Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: mail.kernel.org; spf=pass smtp.mailfrom=alsa-devel-bounces@alsa-project.org Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id C83551669; Fri, 14 Aug 2020 13:01:21 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz C83551669 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1597402930; bh=/qDPCXFe088ave7kIHCWJCbOaYK+S3M6AVFKYuY3PqM=; h=From:To:Subject:Date:In-Reply-To:References:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=JoiSP7wPcKeUMS9yiI0ocFkBYERlKTPsQSlV9N3FFgEjovXu4SArZ3LnKxpLKjDoH dWhbx8KitJRXi5aYcFshO0nZ3djeh1HL/qAb2ztYlo74tT/z8xAaNvJJYbQ++U0A33 +PxFag2BYRWmGK62daxVdJEeqxCWK7t3Z+wjUpGY= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 741B2F80336; Fri, 14 Aug 2020 12:55:19 +0200 (CEST) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa1.perex.cz (Postfix, from userid 50401) id ECD59F8032A; Fri, 14 Aug 2020 12:55:15 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on alsa1.perex.cz X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, RCVD_IN_MSPIKE_H2,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=disabled version=3.4.0 Received: from mail29.static.mailgun.info (mail29.static.mailgun.info [104.130.122.29]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 066BBF80321 for ; Fri, 14 Aug 2020 12:55:06 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 066BBF80321 Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="Et1re8xm" DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1597402509; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=zXIW/VWs4aF3XA2tNuD5iaHNKVHneYAhBLPG1fC5jHk=; b=Et1re8xmRXwC7BvNTZf5h83HPJYrwY8tdjwezEXSXaZeyI3coQGNaRlKrXUtmbdfefTd5bXV /IIXsw5N7z+pRTczBldWtsepWeC66jj3/wLwWxjVrSfFKf8mTyhnSKI8GJXUIr5FuKlqB2ha IVWtyruGFbgGitVVDC1kC6p+9OY= X-Mailgun-Sending-Ip: 104.130.122.29 X-Mailgun-Sid: WyI4ZmE2ZSIsICJhbHNhLWRldmVsQGFsc2EtcHJvamVjdC5vcmciLCAiYmU5ZTRhIl0= Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by smtp-out-n05.prod.us-west-2.postgun.com with SMTP id 5f366d833f2ce11020cdc854 (version=TLS1.2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256); Fri, 14 Aug 2020 10:54:59 GMT Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 7AB81C433C9; Fri, 14 Aug 2020 10:54:59 +0000 (UTC) Received: from rohkumar-linux.qualcomm.com (unknown [202.46.22.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: rohitkr) by smtp.codeaurora.org (Postfix) with ESMTPSA id 79B59C43449; Fri, 14 Aug 2020 10:54:52 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 79B59C43449 Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=none smtp.mailfrom=rohitkr@codeaurora.org From: Rohit kumar To: agross@kernel.org, bjorn.andersson@linaro.org, lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org, plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz, tiwai@suse.com, srinivas.kandagatla@linaro.org, linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v6 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format Date: Fri, 14 Aug 2020 16:23:08 +0530 Message-Id: <1597402388-14112-13-git-send-email-rohitkr@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1597402388-14112-1-git-send-email-rohitkr@codeaurora.org> References: <1597402388-14112-1-git-send-email-rohitkr@codeaurora.org> Cc: Rohit kumar X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Update lpass-cpu binding with yaml formats. Signed-off-by: Rohit kumar --- .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 -------------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 189 +++++++++++++++++++++ 2 files changed, 189 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt deleted file mode 100644 index c07202c..00000000 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt +++ /dev/null @@ -1,130 +0,0 @@ -* Qualcomm Technologies LPASS CPU DAI - -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). - -Required properties: - -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or - "qcom,sc7180-lpass-cpu" -- clocks : Must contain an entry for each entry in clock-names. -- clock-names : A list which must include the following entries: - * "ahbix-clk" - * "mi2s-osr-clk" - * "mi2s-bit-clk" - : required clocks for "qcom,lpass-cpu-apq8016" - * "ahbix-clk" - * "mi2s-bit-clk0" - * "mi2s-bit-clk1" - * "mi2s-bit-clk2" - * "mi2s-bit-clk3" - * "pcnoc-mport-clk" - * "pcnoc-sway-clk" - : required clocks for "qcom,lpass-cpu-sc7180" - * "audio-core" - * "mclk0" - * "mi2s-bit-clk0" - * "mi2s-bit-clk1" - * "pcnoc-sway-clk" - * "pcnoc-mport-clk" - -- interrupts : Must contain an entry for each entry in - interrupt-names. -- interrupt-names : A list which must include the following entries: - * "lpass-irq-lpaif" -- pinctrl-N : One property must exist for each entry in - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt - for details of the property values. -- pinctrl-names : Must contain a "default" entry. -- reg : Must contain an address for each entry in reg-names. -- reg-names : A list which must include the following entries: - * "lpass-lpaif" -- #address-cells : Must be 1 -- #size-cells : Must be 0 - - - -Optional properties: - -- qcom,adsp : Phandle for the audio DSP node - -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. -The SD lines to use can be configured by adding subnodes for each of the DAIs. - -Required properties for each DAI (represented by a subnode): -- reg : Must be one of the DAI IDs - (usually part of dt-bindings header) -- qcom,playback-sd-lines: List of serial data lines to use for playback - Each SD line should be represented by a number from 0-3. -- qcom,capture-sd-lines : List of serial data lines to use for capture - Each SD line should be represented by a number from 0-3. - -Note that adding a subnode changes the default to "no lines configured", -so both playback and capture lines should be configured when a subnode is added. - -Examples: -1) - -lpass@28100000 { - compatible = "qcom,lpass-cpu"; - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>; - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; - interrupts = <0 85 1>; - interrupt-names = "lpass-irq-lpaif"; - pinctrl-names = "default", "idle"; - pinctrl-0 = <&mi2s_default>; - pinctrl-1 = <&mi2s_idle>; - reg = <0x28100000 0x10000>; - reg-names = "lpass-lpaif"; - qcom,adsp = <&adsp>; - - #address-cells = <1>; - #size-cells = <0>; - - /* Optional to set different MI2S SD lines */ - dai@3 { - reg = ; - qcom,playback-sd-lines = <0 1>; - }; -}; - -2) - -#include - -lpass_cpu: lpass { - compatible = "qcom,sc7180-lpass-cpu"; - - reg = <0 0x62F00000 0 0x29000>; - - iommus = <&apps_smmu 0x1020 0>; - - power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; - clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; - clock-names = "pcnoc-sway-clk", "audio-core", - "mclk0", "pcnoc-mport-clk", - "mi2s-bit-clk0", "mi2s-bit-clk1"; - interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "lpass-irq-lpaif"; - - - #sound-dai-cells = <1>; - - #address-cells = <1>; - #size-cells = <0>; - - mi2s-primary@0 { - reg = ; - qcom,playback-sd-lines = <1>; - qcom,capture-sd-lines = <0>; - }; - - mi2s-secondary@1 { - reg = ; - qcom,playback-sd-lines = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file mode 100644 index 00000000..09c9bd2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -0,0 +1,189 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings + +maintainers: + - Srinivas Kandagatla + - Rohit kumar + +description: | + Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist + of MI2S interface for audio data transfer on external codecs. LPASS cpu driver + is a module to configure Low-Power Audio Interface(LPAIF) core registers + across different IP versions. + +properties: + compatible: + enum: + - qcom,lpass-cpu + - qcom,apq8016-lpass-cpu + - qcom,sc7180-lpass-cpu + + reg: + maxItems: 1 + description: LPAIF core registers + + clocks: + minItems: 3 + maxItems: 6 + + clock-names: + minItems: 3 + maxItems: 6 + + interrupts: + maxItems: 1 + description: LPAIF DMA buffer interrupt + + qcom,adsp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle for the audio DSP node + + iommus: + maxItems: 1 + description: Phandle to apps_smmu node with sid mask + + power-domains: + maxItems: 1 + + '#sound-dai-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "(^mi2s-[0-9a-f]$|mi2s)": + type: object + description: Required properties for each DAI + + properties: + reg: + maxItems: 1 + description: Must be one of the DAI ID + + qcom,playback-sd-lines: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: list of MI2S data lines for playback + + qcom,capture-sd-lines: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: list of MI2S data lines for capture + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - '#sound-dai-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,lpass-cpu + + then: + properties: + clock-names: + items: + - const: ahbix-clk + - const: mi2s-osr-clk + - const: mi2s-bit-clk + + - if: + properties: + compatible: + contains: + const: qcom,apq8016-lpass-cpu + + then: + properties: + clock-names: + items: + - const: ahbix-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + - const: mi2s-bit-clk2 + - const: mi2s-bit-clk3 + - const: pcnoc-mport-clk + - const: pcnoc-sway-clk + + - if: + properties: + compatible: + contains: + const: qcom,sc7180-lpass-cpu + + then: + properties: + clock-names: + items: + - const: pcnoc-sway-clk + - const: audio-core + - const: mclk0 + - const: pcnoc-mport-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + required: + - iommus + - power-domains + +examples: + - | + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + lpass@62f00000 { + compatible = "qcom,sc7180-lpass-cpu"; + + reg = <0 0x62f00000 0 0x29000>; + + iommus = <&apps_smmu 0x1020 0>; + power-domains = <&lpass_hm 0>; + + clocks = <&gcc 131>, + <&lpasscorecc 6>, + <&lpasscorecc 7>, + <&lpasscorecc 10>, + <&lpasscorecc 8>, + <&lpasscorecc 9>; + + clock-names = "pcnoc-sway-clk", "audio-core", + "mclk0", "pcnoc-mport-clk", + "mi2s-bit-clk0", "mi2s-bit-clk1"; + + interrupts = <0 160 1>; + + #sound-dai-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + /* Optional to set different MI2S SD lines */ + mi2s-primary@0 { + reg = ; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>; + }; + }; + }; + +...