| Message ID | 1605119676-32273-2-git-send-email-spujar@nvidia.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Tegra210 audio graph card | expand |
On Thu, Nov 12, 2020 at 12:04:31AM +0530, Sameer Pujar wrote: > Add device tree binding properties of generic graph to ASoC component > devices. This allows to define audio ports out of these components or > DAIs and audio graph based sound card can be realised with this. This is all dependent on graph.yaml being applied which hasn't happened yet. I guess I'll need to provide a branch as there's multiple subsystems needing it. > > Signed-off-by: Sameer Pujar <spujar@nvidia.com> > --- > .../devicetree/bindings/sound/nvidia,tegra186-dspk.yaml | 6 ++++++ > .../devicetree/bindings/sound/nvidia,tegra210-admaif.yaml | 6 ++++++ > .../devicetree/bindings/sound/nvidia,tegra210-ahub.yaml | 13 +++++++++++-- > .../devicetree/bindings/sound/nvidia,tegra210-dmic.yaml | 6 ++++++ > .../devicetree/bindings/sound/nvidia,tegra210-i2s.yaml | 6 ++++++ > 5 files changed, 35 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > index ed2fb32..3c9364d 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml > @@ -55,6 +55,12 @@ properties: > The name can be "DSPK1" or "DSPKx", where x depends on the maximum > available instances on a Tegra SoC. > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports If you have 'ports', then that means you have multiple ports and you have to enumerate what each port is. > + > + port: > + $ref: /schemas/sound/audio-graph.yaml#/properties/port If you only have 1 port then, you can use 'port'. So listing both is an error. > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > index c028b25..162823d 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml > @@ -37,6 +37,12 @@ properties: > > dma-names: true > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + port: > + $ref: /schemas/sound/audio-graph.yaml#/properties/port > + > if: > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > index d772197..59cd1f1 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > @@ -56,6 +56,16 @@ properties: > > ranges: true > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + port: > + $ref: /schemas/sound/audio-graph.yaml#/properties/port > + > +patternProperties: > + "@[0-9a-f]+$": > + type: object > + > required: > - compatible > - reg > @@ -67,8 +77,7 @@ required: > - "#size-cells" > - ranges > > -additionalProperties: > - type: object > +additionalProperties: false > > examples: > - | > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > index 2a3207b..b16bf5e 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml > @@ -56,6 +56,12 @@ properties: > The name can be "DMIC1" or "DMIC2" ... "DMICx", where x depends > on the maximum available instances on a Tegra SoC. > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + port: > + $ref: /schemas/sound/audio-graph.yaml#/properties/port > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > index dfc1bf7..598f763 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml > @@ -74,6 +74,12 @@ properties: > The name can be "I2S1" or "I2S2" ... "I2Sx", where x depends > on the maximum available instances on a Tegra SoC. > > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + port: > + $ref: /schemas/sound/audio-graph.yaml#/properties/port > + > required: > - compatible > - reg > -- > 2.7.4 >
Hi Rob, >> Add device tree binding properties of generic graph to ASoC component >> devices. This allows to define audio ports out of these components or >> DAIs and audio graph based sound card can be realised with this. > This is all dependent on graph.yaml being applied which hasn't happened > yet. I guess I'll need to provide a branch as there's multiple > subsystems needing it. > >> Signed-off-by: Sameer Pujar <spujar@nvidia.com> >> --- >> .../devicetree/bindings/sound/nvidia,tegra186-dspk.yaml | 6 ++++++ >> .../devicetree/bindings/sound/nvidia,tegra210-admaif.yaml | 6 ++++++ >> .../devicetree/bindings/sound/nvidia,tegra210-ahub.yaml | 13 +++++++++++-- >> .../devicetree/bindings/sound/nvidia,tegra210-dmic.yaml | 6 ++++++ >> .../devicetree/bindings/sound/nvidia,tegra210-i2s.yaml | 6 ++++++ >> 5 files changed, 35 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml >> index ed2fb32..3c9364d 100644 >> --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml >> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml >> @@ -55,6 +55,12 @@ properties: >> The name can be "DSPK1" or "DSPKx", where x depends on the maximum >> available instances on a Tegra SoC. >> >> + ports: >> + $ref: /schemas/graph.yaml#/properties/ports > If you have 'ports', then that means you have multiple ports and you > have to enumerate what each port is. > >> + >> + port: >> + $ref: /schemas/sound/audio-graph.yaml#/properties/port > If you only have 1 port then, you can use 'port'. > > > So listing both is an error. Since "ASoC: graph card schema rework" series is merged now, referencing "audio-graph-port.yaml" should be sufficient here? ...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index ed2fb32..3c9364d 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -55,6 +55,12 @@ properties: The name can be "DSPK1" or "DSPKx", where x depends on the maximum available instances on a Tegra SoC. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + port: + $ref: /schemas/sound/audio-graph.yaml#/properties/port + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index c028b25..162823d 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -37,6 +37,12 @@ properties: dma-names: true + ports: + $ref: /schemas/graph.yaml#/properties/ports + + port: + $ref: /schemas/sound/audio-graph.yaml#/properties/port + if: properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index d772197..59cd1f1 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -56,6 +56,16 @@ properties: ranges: true + ports: + $ref: /schemas/graph.yaml#/properties/ports + + port: + $ref: /schemas/sound/audio-graph.yaml#/properties/port + +patternProperties: + "@[0-9a-f]+$": + type: object + required: - compatible - reg @@ -67,8 +77,7 @@ required: - "#size-cells" - ranges -additionalProperties: - type: object +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index 2a3207b..b16bf5e 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -56,6 +56,12 @@ properties: The name can be "DMIC1" or "DMIC2" ... "DMICx", where x depends on the maximum available instances on a Tegra SoC. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + port: + $ref: /schemas/sound/audio-graph.yaml#/properties/port + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index dfc1bf7..598f763 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -74,6 +74,12 @@ properties: The name can be "I2S1" or "I2S2" ... "I2Sx", where x depends on the maximum available instances on a Tegra SoC. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + port: + $ref: /schemas/sound/audio-graph.yaml#/properties/port + required: - compatible - reg
Add device tree binding properties of generic graph to ASoC component devices. This allows to define audio ports out of these components or DAIs and audio graph based sound card can be realised with this. Signed-off-by: Sameer Pujar <spujar@nvidia.com> --- .../devicetree/bindings/sound/nvidia,tegra186-dspk.yaml | 6 ++++++ .../devicetree/bindings/sound/nvidia,tegra210-admaif.yaml | 6 ++++++ .../devicetree/bindings/sound/nvidia,tegra210-ahub.yaml | 13 +++++++++++-- .../devicetree/bindings/sound/nvidia,tegra210-dmic.yaml | 6 ++++++ .../devicetree/bindings/sound/nvidia,tegra210-i2s.yaml | 6 ++++++ 5 files changed, 35 insertions(+), 2 deletions(-)