| Message ID | 1666271160-22424-1-git-send-email-quic_srivasam@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3] dt-bindings: soundwire: Convert text bindings to DT Schema | expand |
On 20/10/2022 09:06, Srinivasa Rao Mandadapu wrote: > Convert soundwire text bindings to DT Schema format. > > Update interrupt property items as per device tree, > as it is not appropriately described in text file. > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> > Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> > --- Thank you for your patch. There is something to discuss/improve. > -}; > diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml > new file mode 100644 > index 0000000..12cd3c1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml > @@ -0,0 +1,184 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SoundWire Controller > + > +maintainers: > + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > + - Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > + > +description: > + The Qualcomm SoundWire controller along with its board specific bus parameters. > + > +properties: > + compatible: > + enum: > + - qcom,soundwire-v1.3.0 > + - qcom,soundwire-v1.5.0 > + - qcom,soundwire-v1.5.1 > + - qcom,soundwire-v1.6.0 > + > + reg: > + maxItems: 1 > + > + interrupts: > + items: > + - description: specify the SoundWire controller core. > + - description: specify the Soundwire controller wake IRQ. The second property was optional. You need to test DTS before sending the bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). IOW, you need here: minItems: 1 > + > + interrupt-names: minItems: 1 > + items: > + - const: wakeup > + - const: core That's definitely wrong order and should not pass any tests... > + > + clocks: > + items: > + - description: iface clock > + > + clock-names: > + items: > + - const: iface > + > + resets: > + items: > + - description: SWR_AUDIO_CGCR RESET > + > + reset-names: > + items: > + - const: swr_audio_cgcr > + > + '#sound-dai-cells': > + const: 1 > + > + '#address-cells': > + const: 2 > + > + '#size-cells': > + const: 0 > + > + wakeup-source: true > + > + qcom,din-ports: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: count of data in ports > + > + qcom,dout-ports: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: count of data out ports > + > + qcom,ports-word-length: > + $ref: /schemas/types.yaml#/definitions/uint8-array > + description: size of payload channel sample. > + maxItems: 5 > + > + qcom,ports-sinterval-low: > + $ref: /schemas/types.yaml#/definitions/uint8-array > + description: sample interval low of each data port. > + maxItems: 5 > + > + qcom,ports-offset1: > + $ref: /schemas/types.yaml#/definitions/uint8-array > + description: payload transport window offset1 of each data port. You miss here some pieces of original description, > + maxItems: 5 > + > + qcom,ports-offset2: > + $ref: /schemas/types.yaml#/definitions/uint8-array > + description: payload transport window offset2 of each data port. Ditto - and in other places. > + maxItems: 5 > + > + qcom,ports-lane-control: > + $ref: /schemas/types.yaml#/definitions/uint8-array > + description: identify which data lane the data port uses. > + maxItems: 5 > + > + qcom,ports-block-pack-mode: > + $ref: /schemas/types.yaml#/definitions/uint8-array > + description: indicate the block packing mode. > + maxItems: 5 > + > + qcom,ports-hstart: > + $ref: /schemas/types.yaml#/definitions/uint8-array > + description: identifying lowerst numbered coloum in SoundWire frame. > + maxItems: 5 > + > + qcom,ports-hstop: > + $ref: /schemas/types.yaml#/definitions/uint8-array > + description: identifying highest numbered coloum in SoundWire frame. > + maxItems: 5 > + > + qcom,ports-block-group-count: > + $ref: /schemas/types.yaml#/definitions/uint8-array > + description: indicate how many sample intervals are combined into a payload. > + maxItems: 5 > + > + codec@4: It's too specific. What if different device uses different address? You need patternProperties "^codec@[0-9a-f]+$" > + $ref: ../sound/qcom,wcd938x-sdw.yaml# Full path, so /schemas/sound/qcom,wcd..... Cannot we have other codecs attached? For example check SC7280 IDP, SM8250 MTP, RB5. > + description: > + Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC. > + It has RX and TX Soundwire slave devices. This bindings is for the > + slave devices. > + type: object > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names > + - '#sound-dai-cells' > + - '#address-cells' > + - '#size-cells' > + - qcom,dout-ports > + - qcom,din-ports > + - qcom,ports-sinterval-low > + - qcom,ports-offset1 > + - qcom,ports-offset2 > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> > + > + soundwire@3210000 { > + compatible = "qcom,soundwire-v1.6.0"; > + reg = <0x03210000 0x2000>; > + > + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, > + <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; > + Missing interrupt names. Best regards, Krzysztof
On Thu, 20 Oct 2022 18:36:00 +0530, Srinivasa Rao Mandadapu wrote: > Convert soundwire text bindings to DT Schema format. > > Update interrupt property items as per device tree, > as it is not appropriately described in text file. > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> > Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> > --- > This patch depends on: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=42801e6185290d63691bd39cf8a3bba6cd5fe520 > Changes since V2: > -- Update commit message. > -- Add child node property. > -- Change file name. > -- Remove minIteams for few properties. > -- Remove redundant required properties. > -- Remove redundant description for wakeup-source property. > -- Update interrupt property items. > Changes since V1: > -- Remove the status field in example. > -- Remove interrupt-names property in the required list. > -- Add the wakeup-source property. > > .../devicetree/bindings/soundwire/qcom,sdw.txt | 214 --------------------- > .../bindings/soundwire/qcom,soundwire.yaml | 184 ++++++++++++++++++ > 2 files changed, 184 insertions(+), 214 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/soundwire/qcom,sdw.txt > create mode 100644 Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/ soundwire@3210000: 'codec@0,4' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3210000: interrupts: [[0, 155, 4]] is too short arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: 'codec@0,3', 'qcom,port-offset' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: qcom,ports-block-group-count: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: qcom,ports-block-pack-mode: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: qcom,ports-hstart: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: qcom,ports-hstop: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: qcom,ports-lane-control: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: qcom,ports-offset1: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: qcom,ports-offset2: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: qcom,ports-sinterval-low: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire@3230000: qcom,ports-word-length: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sc7280-crd-r3.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb soundwire-controller@3210000: interrupts: [[0, 298, 4]] is too short arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-mtp.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3210000: 'label' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3210000: 'label', 'wcd9380-rx@0,4' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sm8250-mtp.dtb soundwire-controller@3230000: interrupt-names:0: 'wakeup' was expected arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-mtp.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3230000: interrupt-names: ['core'] is too short arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-mtp.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3230000: interrupts-extended: [[1, 0, 297, 4]] is too short arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-mtp.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3230000: 'label', 'qcom,port-offset' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3230000: 'label', 'qcom,port-offset', 'wcd9380-tx@0,3' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sm8250-mtp.dtb soundwire-controller@3250000: interrupts: [[0, 202, 4]] is too short arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-mtp.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3250000: qcom,ports-block-pack-mode: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-mtp.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3250000: qcom,ports-offset1: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-mtp.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3250000: qcom,ports-offset2: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-mtp.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3250000: qcom,ports-sinterval-low: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb arch/arm64/boot/dts/qcom/sm8250-hdk.dtb arch/arm64/boot/dts/qcom/sm8250-mtp.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dtb arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dtb soundwire-controller@3250000: 'wsa8810-left@0,4', 'wsa8810-right@0,3' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sm8250-mtp.dtb soundwire-controller@3250000: 'wsa8810-left', 'wsa8810-right' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb swm@c85: interrupts-extended: [[169, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dtb swm@c85: interrupts-extended: [[175, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dtb swm@c85: interrupts-extended: [[176, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-mtp.dtb swm@c85: interrupts-extended: [[177, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dtb swm@c85: interrupts-extended: [[178, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dtb arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dtb swm@c85: interrupts-extended: [[179, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dtb arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dtb swm@c85: interrupts-extended: [[180, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dtb swm@c85: interrupts-extended: [[181, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dtb swm@c85: interrupts-extended: [[186, 20]] is too short arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dtb swm@c85: interrupts-extended: [[189, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-db845c.dtb swm@c85: interrupts-extended: [[190, 20]] is too short arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dtb arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dtb arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dtb swm@c85: qcom,ports-offset1: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dtb arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dtb arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dtb arch/arm64/boot/dts/qcom/sdm845-db845c.dtb arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dtb arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dtb arch/arm64/boot/dts/qcom/sdm845-mtp.dtb arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dtb arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dtb arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dtb arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dtb arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dtb arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dtb arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dtb swm@c85: qcom,ports-offset2: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dtb arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dtb arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dtb arch/arm64/boot/dts/qcom/sdm845-db845c.dtb arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dtb arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dtb arch/arm64/boot/dts/qcom/sdm845-mtp.dtb arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dtb arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dtb arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dtb arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dtb arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dtb arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dtb arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dtb swm@c85: qcom,ports-sinterval-low: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dtb arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dtb arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dtb arch/arm64/boot/dts/qcom/sdm845-db845c.dtb arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dtb arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dtb arch/arm64/boot/dts/qcom/sdm845-mtp.dtb arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dtb arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dtb arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dtb arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dtb arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dtb arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dtb arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dtb arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dtb swm@c85: 'wsa8810-left', 'wsa8810-right' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sdm845-db845c.dtb arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dtb arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dtb
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt deleted file mode 100644 index c85c257..0000000 --- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt +++ /dev/null @@ -1,214 +0,0 @@ -Qualcomm SoundWire Controller Bindings - - -This binding describes the Qualcomm SoundWire Controller along with its -board specific bus parameters. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>", - Example: - "qcom,soundwire-v1.3.0" - "qcom,soundwire-v1.5.0" - "qcom,soundwire-v1.5.1" - "qcom,soundwire-v1.6.0" -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of SoundWire controller - address space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the SoundWire Controller core and optional - wake IRQ - -- interrupt-names: - Usage: Optional - Value type: boolean - Value type: <stringlist> - Definition: should be "core" for core and "wakeup" for wake interrupt. - -- wakeup-source: - Usage: Optional - Value type: boolean - Definition: should specify if SoundWire Controller is wake up capable. - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: should be "iface" for SoundWire Controller interface clock - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the SoundWire Controller interface clock - -- #sound-dai-cells: - Usage: required - Value type: <u32> - Definition: must be 1 for digital audio interfaces on the controller. - -- qcom,dout-ports: - Usage: required - Value type: <u32> - Definition: must be count of data out ports - -- qcom,din-ports: - Usage: required - Value type: <u32> - Definition: must be count of data in ports - -- qcom,ports-offset1: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify payload transport window offset1 of each - data port. Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-offset2: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify payload transport window offset2 of each - data port. Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-sinterval-low: - Usage: required - Value type: <prop-encoded-array> - Definition: should be sample interval low of each data port. - Out ports followed by In ports. Used for Sample Interval - calculation. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-word-length: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be size of payload channel sample. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-block-pack-mode: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be 0 or 1 to indicate the block packing mode. - 0 to indicate Blocks are per Channel - 1 to indicate Blocks are per Port. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-block-group-count: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be in range 1 to 4 to indicate how many sample - intervals are combined into a payload. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-lane-control: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be in range 0 to 7 to identify which data lane - the data port uses. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-hstart: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be number identifying lowerst numbered coloum in - SoundWire Frame, i.e. left edge of the Transport sub-frame - for each port. Values between 0 and 15 are valid. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-hstop: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be number identifying highest numbered coloum in - SoundWire Frame, i.e. the right edge of the Transport - sub-frame for each port. Values between 0 and 15 are valid. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,dports-type: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be one of the following types - 0 for reduced port - 1 for simple ports - 2 for full port - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- reset: - Usage: optional - Value type: <prop-encoded-array> - Definition: Should specify the SoundWire audio CSR reset controller interface, - which is required for SoundWire version 1.6.0 and above. - -- reset-names: - Usage: optional - Value type: <stringlist> - Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset - controller interface. - -Note: - More Information on detail of encoding of these fields can be -found in MIPI Alliance SoundWire 1.0 Specifications. - -= SoundWire devices -Each subnode of the bus represents SoundWire device attached to it. -The properties of these nodes are defined by the individual bindings. - -= EXAMPLE -The following example represents a SoundWire controller on DB845c board -which has controller integrated inside WCD934x codec on SDM845 SoC. - -soundwire: soundwire@c85 { - compatible = "qcom,soundwire-v1.3.0"; - reg = <0xc85 0x20>; - interrupts = <20 IRQ_TYPE_EDGE_RISING>; - clocks = <&wcc>; - clock-names = "iface"; - resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; - reset-names = "swr_audio_cgcr"; - #sound-dai-cells = <1>; - qcom,dports-type = <0>; - qcom,dout-ports = <6>; - qcom,din-ports = <2>; - qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; - qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; - - /* Left Speaker */ - left{ - .... - }; - - /* Right Speaker */ - right{ - .... - }; -}; diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml new file mode 100644 index 0000000..12cd3c1 --- /dev/null +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoundWire Controller + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + - Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> + +description: + The Qualcomm SoundWire controller along with its board specific bus parameters. + +properties: + compatible: + enum: + - qcom,soundwire-v1.3.0 + - qcom,soundwire-v1.5.0 + - qcom,soundwire-v1.5.1 + - qcom,soundwire-v1.6.0 + + reg: + maxItems: 1 + + interrupts: + items: + - description: specify the SoundWire controller core. + - description: specify the Soundwire controller wake IRQ. + + interrupt-names: + items: + - const: wakeup + - const: core + + clocks: + items: + - description: iface clock + + clock-names: + items: + - const: iface + + resets: + items: + - description: SWR_AUDIO_CGCR RESET + + reset-names: + items: + - const: swr_audio_cgcr + + '#sound-dai-cells': + const: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 0 + + wakeup-source: true + + qcom,din-ports: + $ref: /schemas/types.yaml#/definitions/uint32 + description: count of data in ports + + qcom,dout-ports: + $ref: /schemas/types.yaml#/definitions/uint32 + description: count of data out ports + + qcom,ports-word-length: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: size of payload channel sample. + maxItems: 5 + + qcom,ports-sinterval-low: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: sample interval low of each data port. + maxItems: 5 + + qcom,ports-offset1: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: payload transport window offset1 of each data port. + maxItems: 5 + + qcom,ports-offset2: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: payload transport window offset2 of each data port. + maxItems: 5 + + qcom,ports-lane-control: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: identify which data lane the data port uses. + maxItems: 5 + + qcom,ports-block-pack-mode: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: indicate the block packing mode. + maxItems: 5 + + qcom,ports-hstart: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: identifying lowerst numbered coloum in SoundWire frame. + maxItems: 5 + + qcom,ports-hstop: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: identifying highest numbered coloum in SoundWire frame. + maxItems: 5 + + qcom,ports-block-group-count: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: indicate how many sample intervals are combined into a payload. + maxItems: 5 + + codec@4: + $ref: ../sound/qcom,wcd938x-sdw.yaml# + description: + Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC. + It has RX and TX Soundwire slave devices. This bindings is for the + slave devices. + type: object + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#sound-dai-cells' + - '#address-cells' + - '#size-cells' + - qcom,dout-ports + - qcom,din-ports + - qcom,ports-sinterval-low + - qcom,ports-offset1 + - qcom,ports-offset2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + + soundwire@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0x03210000 0x2000>; + + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&lpass_rx_macro>; + clock-names = "iface"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + codec@4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; + + };