diff mbox series

[11/11] arm64: dts: rockchip: rk3588-rock-5b: Add analog audio

Message ID 167888094408.26.8519612268176404044@mailman-core.alsa-project.org (mailing list archive)
State New, archived
Headers show
Series Enable I2S support for RK3588/RK3588S SoCs | expand

Commit Message

Cristian Ciocaltea March 15, 2023, 11:48 a.m. UTC
Add the necessary DT nodes for the Rock 5B board to enable the analog
audio support provided by the Everest Semi ES8316 codec.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 .../boot/dts/rockchip/rk3588-rock-5b.dts      | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 95805cb0adfa..945eac304766 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -2,6 +2,7 @@ 
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "rk3588.dtsi"
 
 / {
@@ -25,6 +26,59 @@  vcc5v0_sys: vcc5v0-sys-regulator {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "Analog";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8316: es8316@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
 };
 
 &sdhci {
@@ -42,3 +96,11 @@  &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
 };
+
+&pinctrl {
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};