@@ -842,12 +842,14 @@ static int es8316_i2c_probe(struct i2c_client *i2c_client)
es8316->irq = i2c_client->irq;
mutex_init(&es8316->lock);
- ret = devm_request_threaded_irq(dev, es8316->irq, NULL, es8316_irq,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "es8316", es8316);
- if (ret) {
- dev_warn(dev, "Failed to get IRQ %d: %d\n", es8316->irq, ret);
- es8316->irq = -ENXIO;
+ if (es8316->irq > 0) {
+ ret = devm_request_threaded_irq(dev, es8316->irq, NULL, es8316_irq,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ "es8316", es8316);
+ if (ret) {
+ dev_warn(dev, "Failed to get IRQ %d: %d\n", es8316->irq, ret);
+ es8316->irq = -ENXIO;
+ }
}
return devm_snd_soc_register_component(&i2c_client->dev,
The driver is able to work fine without relying on a mandatory interrupt being assigned to the I2C device. This is only needed when making use of the jack-detect support. However, the following warning message is always emitted when there is no such interrupt available: es8316 0-0011: Failed to get IRQ 0: -22 Do not attempt to request an IRQ if it is not available/valid. This also ensures the rather misleading message is not displayed anymore. Also note the IRQ validation relies on commit dab472eb931bc291 ("i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned"). Fixes: 822257661031 ("ASoC: es8316: Add jack-detect support") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> --- sound/soc/codecs/es8316.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)