@@ -445,9 +445,10 @@ static int es8328_hw_params(struct snd_pcm_substream *substream,
{
struct snd_soc_codec *codec = dai->codec;
struct es8328_priv *es8328 = snd_soc_codec_get_drvdata(codec);
- int clk_rate;
+ int clk_rate = clk_get_rate(es8328->clk);
int i;
int reg;
+ int val;
u8 ratio;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -455,16 +456,24 @@ static int es8328_hw_params(struct snd_pcm_substream *substream,
else
reg = ES8328_ADCCONTROL5;
- clk_rate = clk_get_rate(es8328->clk);
-
- if ((clk_rate != ES8328_SYSCLK_RATE_1X) &&
- (clk_rate != ES8328_SYSCLK_RATE_2X)) {
+ switch (clk_rate) {
+ case ES8328_SYSCLK_RATE_1X:
+ val = 0;
+ break;
+ case ES8328_SYSCLK_RATE_2X:
+ val = ES8328_MASTERMODE_MCLKDIV2;
+ break;
+ default:
dev_err(codec->dev,
"%s: clock is running at %d Hz, not %d or %d Hz\n",
__func__, clk_rate,
ES8328_SYSCLK_RATE_1X, ES8328_SYSCLK_RATE_2X);
return -EINVAL;
}
+ ret = snd_soc_update_bits(codec, ES8328_MASTERMODE,
+ ES8328_MASTERMODE_MCLKDIV2, val);
+ if (ret < 0)
+ return ret;
/* find master mode MCLK to sampling frequency ratio */
ratio = mclk_ratios[0].rate;
@@ -484,8 +493,6 @@ static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- struct es8328_priv *es8328 = snd_soc_codec_get_drvdata(codec);
- int clk_rate;
u8 mode = ES8328_DACCONTROL1_DACWL_16;
/* set master/slave audio interface */
@@ -515,14 +522,8 @@ static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai,
snd_soc_write(codec, ES8328_ADCCONTROL4, mode);
/* Master serial port mode, with BCLK generated automatically */
- clk_rate = clk_get_rate(es8328->clk);
- if (clk_rate == ES8328_SYSCLK_RATE_1X)
- snd_soc_write(codec, ES8328_MASTERMODE,
- ES8328_MASTERMODE_MSC);
- else
- snd_soc_write(codec, ES8328_MASTERMODE,
- ES8328_MASTERMODE_MCLKDIV2 |
- ES8328_MASTERMODE_MSC);
+ snd_soc_update_bits(codec, ES8328_MASTERMODE,
+ ES8328_MASTERMODE_MSC, ES8328_MASTERMODE_MSC);
return 0;
}
This ensures that the clock is setup after its frequency has been set; the existing code in set_dai_fmt may be called before the clock rate has been set resulting in an incorrect configuration. Signed-off-by: John Keeping <john@metanate.com> --- sound/soc/codecs/es8328.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)