diff mbox series

[1/2] ASoC: Add driver for PROTO Audio CODEC (with a WM8731)

Message ID 20180829144727.13757-2-codrin.ciubotariu@microchip.com (mailing list archive)
State New, archived
Headers show
Series ASoC: Add support for MikroElektronika PROTO codec | expand

Commit Message

Codrin Ciubotariu Aug. 29, 2018, 2:47 p.m. UTC
Add support for the MikroElektronika PROTO audio codec board.

URL to the audio chip:
http://www.mikroe.com/add-on-boards/audio-voice/audio-codec-proto/

Signed-off-by: Florian Meier <florian.meier@koalo.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
 sound/soc/atmel/Kconfig        |   7 ++
 sound/soc/atmel/Makefile       |   2 +
 sound/soc/atmel/mikroe-proto.c | 189 +++++++++++++++++++++++++++++++++
 3 files changed, 198 insertions(+)
 create mode 100644 sound/soc/atmel/mikroe-proto.c

Comments

Mark Brown Aug. 29, 2018, 2:53 p.m. UTC | #1
On Wed, Aug 29, 2018 at 05:47:26PM +0300, Codrin Ciubotariu wrote:

> +static const unsigned int wm8731_rates_12288000[] = {
> +	8000, 32000, 48000, 96000,
> +};
> +
> +static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 = {
> +	.list = wm8731_rates_12288000,
> +	.count = ARRAY_SIZE(wm8731_rates_12288000),
> +};
> +
> +static int snd_proto_startup(struct snd_pcm_substream *substream)
> +{
> +	/* Setup constraints, because there is a 12.288 MHz XTAL on the board */
> +	snd_pcm_hw_constraint_list(substream->runtime, 0,
> +				   SNDRV_PCM_HW_PARAM_RATE,
> +				   &wm8731_constraints_12288000);
> +	return 0;
> +}

This bit is better added to the CODEC driver since it'll apply to any
system where there's this clock rate (someone else could come in and add
other rates, no need to do that yourself though it'd be nice of course).

That also has the nice bonus that with that I think you'd be able to use
the graph card rather than a custom driver?
Mark Brown Aug. 29, 2018, 3:26 p.m. UTC | #2
On Wed, Aug 29, 2018 at 06:20:59PM +0300, Codrin Ciubotariu wrote:
> On 29.08.2018 17:53, Mark Brown wrote:

> > That also has the nice bonus that with that I think you'd be able to use
> > the graph card rather than a custom driver?

> The main reason for adding a custom driver and not using graph/simple card
> is the snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
> XTAL_RATE, SND_SOC_CLOCK_IN) call. This enables the oscillator found in the
> wm8731 codec. Since WM8731_SYSCLK_XTAL is not 0, we can't use
> system-clock-frequency DT property to set it.

Right, that'd be more substantial surgery on the driver to change the DT
binding so that it's got a clock provider in it; it'd be nice to do but
it's a bit much to make it a blocker so the machine driver is OK.
Codrin Ciubotariu Aug. 29, 2018, 3:33 p.m. UTC | #3
On 29.08.2018 18:20, Codrin Ciubotariu wrote:
> On 29.08.2018 17:53, Mark Brown wrote:
>> On Wed, Aug 29, 2018 at 05:47:26PM +0300, Codrin Ciubotariu wrote:
>>
>>> +static const unsigned int wm8731_rates_12288000[] = {
>>> +    8000, 32000, 48000, 96000,
>>> +};
>>> +
>>> +static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 
>>> = {
>>> +    .list = wm8731_rates_12288000,
>>> +    .count = ARRAY_SIZE(wm8731_rates_12288000),
>>> +};
>>> +
>>> +static int snd_proto_startup(struct snd_pcm_substream *substream)
>>> +{
>>> +    /* Setup constraints, because there is a 12.288 MHz XTAL on the 
>>> board */
>>> +    snd_pcm_hw_constraint_list(substream->runtime, 0,
>>> +                   SNDRV_PCM_HW_PARAM_RATE,
>>> +                   &wm8731_constraints_12288000);
>>> +    return 0;
>>> +}
>>
>> This bit is better added to the CODEC driver since it'll apply to any
>> system where there's this clock rate (someone else could come in and add
>> other rates, no need to do that yourself though it'd be nice of course).
> 
> I could do it.

It looks like these constraints are already in the wm8731 driver. I will 
wait for more comments and then I will send a v2 without this part.

Thanks and best regards,
Codrin
kernel test robot Aug. 29, 2018, 11:43 p.m. UTC | #4
Hi Codrin,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on at91/at91-next]
[also build test ERROR on v4.19-rc1 next-20180829]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Codrin-Ciubotariu/ASoC-Add-driver-for-PROTO-Audio-CODEC-with-a-WM8731/20180830-060610
base:   https://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git at91-next
config: i386-allmodconfig (attached as .config)
compiler: gcc-7 (Debian 7.3.0-16) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   sound/soc/atmel/mikroe-proto.c: In function 'snd_proto_init':
>> sound/soc/atmel/mikroe-proto.c:49:35: error: 'struct snd_soc_pcm_runtime' has no member named 'codec'
     struct snd_soc_codec *codec = rtd->codec;
                                      ^~
>> sound/soc/atmel/mikroe-proto.c:56:16: error: dereferencing pointer to incomplete type 'struct snd_soc_codec'
      dev_err(codec->dev, "Failed to set WM8731 SYSCLK: %d\n", ret);
                   ^~

vim +49 sound/soc/atmel/mikroe-proto.c

    46	
    47	static int snd_proto_init(struct snd_soc_pcm_runtime *rtd)
    48	{
  > 49		struct snd_soc_codec *codec = rtd->codec;
    50		struct snd_soc_dai *codec_dai = rtd->codec_dai;
    51	
    52		/* Set proto sysclk */
    53		int ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
    54						 XTAL_RATE, SND_SOC_CLOCK_IN);
    55		if (ret < 0) {
  > 56			dev_err(codec->dev, "Failed to set WM8731 SYSCLK: %d\n", ret);
    57			return ret;
    58		}
    59	
    60		return 0;
    61	}
    62	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
kernel test robot Aug. 30, 2018, 10:12 a.m. UTC | #5
Hi Codrin,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on at91/at91-next]
[also build test WARNING on v4.19-rc1 next-20180830]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Codrin-Ciubotariu/ASoC-Add-driver-for-PROTO-Audio-CODEC-with-a-WM8731/20180830-060610
base:   https://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git at91-next


coccinelle warnings: (new ones prefixed by >>)

>> sound/soc/atmel/mikroe-proto.c:178:3-8: No need to set .owner here. The core will do it.

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
diff mbox series

Patch

diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index 539ef33e670a..fbf4d3e42c18 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -97,4 +97,11 @@  config SND_ATMEL_SOC_I2S
 	help
 	  Say Y or M if you want to add support for Atmel ASoc driver for boards
 	  using I2S.
+
+config SND_SOC_MIKROE_PROTO
+	tristate "Support for Mikroe-PROTO board"
+	depends on OF
+	select SND_SOC_WM8731
+	help
+	  Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731).
 endif
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index cd87cb4bcff5..9f41bfa0fea3 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -17,6 +17,7 @@  snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o
 snd-atmel-soc-classd-objs := atmel-classd.o
 snd-atmel-soc-pdmic-objs := atmel-pdmic.o
 snd-atmel-soc-tse850-pcm5142-objs := tse850-pcm5142.o
+snd-soc-mikroe-proto-objs := mikroe-proto.o
 
 obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
 obj-$(CONFIG_SND_ATMEL_SOC_WM8904) += snd-atmel-soc-wm8904.o
@@ -24,3 +25,4 @@  obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o
 obj-$(CONFIG_SND_ATMEL_SOC_CLASSD) += snd-atmel-soc-classd.o
 obj-$(CONFIG_SND_ATMEL_SOC_PDMIC) += snd-atmel-soc-pdmic.o
 obj-$(CONFIG_SND_ATMEL_SOC_TSE850_PCM5142) += snd-atmel-soc-tse850-pcm5142.o
+obj-$(CONFIG_SND_SOC_MIKROE_PROTO) += snd-soc-mikroe-proto.o
diff --git a/sound/soc/atmel/mikroe-proto.c b/sound/soc/atmel/mikroe-proto.c
new file mode 100644
index 000000000000..9d9dc1c8ac6b
--- /dev/null
+++ b/sound/soc/atmel/mikroe-proto.c
@@ -0,0 +1,189 @@ 
+/*
+ * ASoC driver for PROTO AudioCODEC (with a WM8731)
+ *
+ * Author:      Florian Meier, <koalo@koalo.de>
+ *	      Copyright 2013
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include "../codecs/wm8731.h"
+
+#define XTAL_RATE 12288000	/* This is fixed on this board */
+
+static const unsigned int wm8731_rates_12288000[] = {
+	8000, 32000, 48000, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 = {
+	.list = wm8731_rates_12288000,
+	.count = ARRAY_SIZE(wm8731_rates_12288000),
+};
+
+static int snd_proto_startup(struct snd_pcm_substream *substream)
+{
+	/* Setup constraints, because there is a 12.288 MHz XTAL on the board */
+	snd_pcm_hw_constraint_list(substream->runtime, 0,
+				   SNDRV_PCM_HW_PARAM_RATE,
+				   &wm8731_constraints_12288000);
+	return 0;
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_proto_ops = {
+	.startup = snd_proto_startup,
+};
+
+static int snd_proto_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+	/* Set proto sysclk */
+	int ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
+					 XTAL_RATE, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set WM8731 SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget snd_proto_widget[] = {
+	SND_SOC_DAPM_MIC("Microphone Jack", NULL),
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route snd_proto_route[] = {
+	/* speaker connected to LHPOUT/RHPOUT */
+	{"Headphone Jack", NULL, "LHPOUT"},
+	{"Headphone Jack", NULL, "RHPOUT"},
+
+	/* mic is connected to Mic Jack, with WM8731 Mic Bias */
+	{"MICIN", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Microphone Jack"},
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_proto = {
+	.name		= "snd_mikroe_proto",
+	.owner		= THIS_MODULE,
+	.dapm_widgets	= snd_proto_widget,
+	.num_dapm_widgets = ARRAY_SIZE(snd_proto_widget),
+	.dapm_routes	= snd_proto_route,
+	.num_dapm_routes = ARRAY_SIZE(snd_proto_route),
+};
+
+static int snd_proto_probe(struct platform_device *pdev)
+{
+	struct snd_soc_dai_link *dai;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *codec_np, *cpu_np;
+	struct device_node *bitclkmaster = NULL;
+	struct device_node *framemaster = NULL;
+	unsigned int dai_fmt;
+	int ret = 0;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No device node supplied\n");
+		return -EINVAL;
+	}
+
+	snd_proto.dev = &pdev->dev;
+	ret = snd_soc_of_parse_card_name(&snd_proto, "model");
+	if (ret)
+		return ret;
+
+	dai = devm_kzalloc(&pdev->dev, sizeof(*dai), GFP_KERNEL);
+	if (!dai)
+		return -ENOMEM;
+
+	snd_proto.dai_link = dai;
+	snd_proto.num_links = 1;
+
+	dai->name = "WM8731";
+	dai->stream_name = "WM8731 HiFi";
+	dai->codec_dai_name = "wm8731-hifi";
+	dai->init = &snd_proto_init;
+	dai->ops = &snd_proto_ops;
+
+	codec_np = of_parse_phandle(np, "audio-codec", 0);
+	if (!codec_np) {
+		dev_err(&pdev->dev, "audio-codec node missing\n");
+		return -EINVAL;
+	}
+	dai->codec_of_node = codec_np;
+
+	cpu_np = of_parse_phandle(np, "i2s-controller", 0);
+	if (!cpu_np) {
+		dev_err(&pdev->dev, "i2s-controller missing\n");
+		return -EINVAL;
+	}
+	dai->cpu_of_node = cpu_np;
+	dai->platform_of_node = cpu_np;
+
+	dai_fmt = snd_soc_of_parse_daifmt(np, NULL,
+					  &bitclkmaster, &framemaster);
+	if (bitclkmaster != framemaster) {
+		dev_err(&pdev->dev, "Must be the same bitclock and frame master\n");
+		return -EINVAL;
+	}
+	if (bitclkmaster) {
+		dai_fmt &= ~SND_SOC_DAIFMT_MASTER_MASK;
+		if (codec_np == bitclkmaster)
+			dai_fmt |= SND_SOC_DAIFMT_CBM_CFM;
+		else
+			dai_fmt |= SND_SOC_DAIFMT_CBS_CFS;
+	}
+	of_node_put(bitclkmaster);
+	of_node_put(framemaster);
+	dai->dai_fmt = dai_fmt;
+
+	of_node_put(codec_np);
+	of_node_put(cpu_np);
+
+	ret = snd_soc_register_card(&snd_proto);
+	if (ret && ret != -EPROBE_DEFER)
+		dev_err(&pdev->dev,
+			"snd_soc_register_card() failed: %d\n", ret);
+
+	return ret;
+}
+
+static int snd_proto_remove(struct platform_device *pdev)
+{
+	return snd_soc_unregister_card(&snd_proto);
+}
+
+static const struct of_device_id snd_proto_of_match[] = {
+	{ .compatible = "mikroe,mikroe-proto", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, snd_proto_of_match);
+
+static struct platform_driver snd_proto_driver = {
+	.driver = {
+		.name   = "snd-mikroe-proto",
+		.owner  = THIS_MODULE,
+		.of_match_table = snd_proto_of_match,
+	},
+	.probe	  = snd_proto_probe,
+	.remove	 = snd_proto_remove,
+};
+
+module_platform_driver(snd_proto_driver);
+
+MODULE_AUTHOR("Florian Meier");
+MODULE_DESCRIPTION("ASoC Driver for PROTO board (WM8731)");
+MODULE_LICENSE("GPL");