diff mbox series

[v3,08/11] dt-bindings: pinctrl: qcom-wcd934x: Add bindings for gpio

Message ID 20191029112700.14548-9-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show
Series ASoC: Add support to WCD9340/WCD9341 codec | expand

Commit Message

Srinivas Kandagatla Oct. 29, 2019, 11:26 a.m. UTC
Qualcomm Technologies Inc WCD9340/WCD9341 Audio Codec has integrated
gpio controller to control 5 gpios on the chip. This patch adds
required device tree bindings for it.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 .../pinctrl/qcom,wcd934x-pinctrl.yaml         | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,wcd934x-pinctrl.yaml

Comments

Linus Walleij Nov. 3, 2019, 11:19 p.m. UTC | #1
On Tue, Oct 29, 2019 at 12:29 PM Srinivas Kandagatla
<srinivas.kandagatla@linaro.org> wrote:

> Qualcomm Technologies Inc WCD9340/WCD9341 Audio Codec has integrated
> gpio controller to control 5 gpios on the chip. This patch adds
> required device tree bindings for it.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  .../pinctrl/qcom,wcd934x-pinctrl.yaml         | 52 +++++++++++++++++++

The bindings look OK, but remind me if I have asked before (sorry then)
does these GPIOs expose some pin control properties and that is why
the driver is placed under pin control rather than the GPIO namespace?

Sorry if this is something I asked before, I just get too much mail.

Yours,
Linus Walleij
Srinivas Kandagatla Nov. 4, 2019, 9:35 a.m. UTC | #2
Thanks for reviewing this!

On 03/11/2019 23:19, Linus Walleij wrote:
> On Tue, Oct 29, 2019 at 12:29 PM Srinivas Kandagatla
> <srinivas.kandagatla@linaro.org> wrote:
> 
>> Qualcomm Technologies Inc WCD9340/WCD9341 Audio Codec has integrated
>> gpio controller to control 5 gpios on the chip. This patch adds
>> required device tree bindings for it.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>>   .../pinctrl/qcom,wcd934x-pinctrl.yaml         | 52 +++++++++++++++++++
> 
> The bindings look OK, but remind me if I have asked before (sorry then)
> does these GPIOs expose some pin control properties and that is why
> the driver is placed under pin control rather than the GPIO namespace?
> 
I don't remember you asking about this before :-),

This controller just has Output enable bits, No pin control properties.

As you suggested I can move this to drivers/gpio in next version.

Thanks,
srini
Linus Walleij Nov. 5, 2019, 1:25 p.m. UTC | #3
On Mon, Nov 4, 2019 at 10:35 AM Srinivas Kandagatla
<srinivas.kandagatla@linaro.org> wrote:

> This controller just has Output enable bits, No pin control properties.
>
> As you suggested I can move this to drivers/gpio in next version.

OK perfect, thanks!

NB: this probably also affects the compatible-string which contains
"pinctrl*" right?

Yours,
Linus Walleij
Srinivas Kandagatla Nov. 5, 2019, 1:27 p.m. UTC | #4
On 05/11/2019 13:25, Linus Walleij wrote:
> On Mon, Nov 4, 2019 at 10:35 AM Srinivas Kandagatla
> <srinivas.kandagatla@linaro.org>  wrote:
> 
>> This controller just has Output enable bits, No pin control properties.
>>
>> As you suggested I can move this to drivers/gpio in next version.
> OK perfect, thanks!
> 
> NB: this probably also affects the compatible-string which contains
> "pinctrl*" right?
Yes, I will suffix it with "-gpio" instead.

thanks,
srini
Rob Herring (Arm) Nov. 5, 2019, 6:49 p.m. UTC | #5
On Tue, Nov 05, 2019 at 01:27:45PM +0000, Srinivas Kandagatla wrote:
> 
> 
> On 05/11/2019 13:25, Linus Walleij wrote:
> > On Mon, Nov 4, 2019 at 10:35 AM Srinivas Kandagatla
> > <srinivas.kandagatla@linaro.org>  wrote:
> > 
> > > This controller just has Output enable bits, No pin control properties.
> > > 
> > > As you suggested I can move this to drivers/gpio in next version.
> > OK perfect, thanks!
> > 
> > NB: this probably also affects the compatible-string which contains
> > "pinctrl*" right?
> Yes, I will suffix it with "-gpio" instead.

Not a discussion we should be having because you should name this after 
what's in the chip documentation not the OS subsystem it happens to land 
in.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,wcd934x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,wcd934x-pinctrl.yaml
new file mode 100644
index 000000000000..432486d753b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,wcd934x-pinctrl.yaml
@@ -0,0 +1,52 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,wcd934x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WCD9340/WCD9341 GPIO Pin controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm Technologies Inc WCD9340/WCD9341 Audio Codec has integrated
+  gpio controller to control 5 gpios on the chip.
+
+properties:
+  compatible:
+    enum:
+      - qcom,wcd9340-pinctrl
+      - qcom,wcd9341-pinctrl
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - gpio-ranges
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    wcdpinctrl: pinctrl@42 {
+        compatible = "qcom,wcd9340-pinctrl";
+        reg = <0x042 0x2>;
+        gpio-controller;
+        gpio-ranges = <&wcdpinctrl 0 0 5>;
+        #gpio-cells = <2>;
+    };
+
+...