diff mbox series

[RFC,03/34] arm64: dts: allwinner: a64: Fix the audio codec compatible

Message ID 20200217064250.15516-4-samuel@sholland.org (mailing list archive)
State New, archived
Headers show
Series sun8i-codec fixes and new features | expand

Commit Message

Samuel Holland Feb. 17, 2020, 6:42 a.m. UTC 
Some differences were found between the A33 codec and the A64 codec,
causing the left and right channels to be swapped. To fix this, a new
compatible was added for the A64 variant of the codec. Update the A64
DTS to use the correct compatible.

Cc: stable@kernel.org
Fixes: ec4a95409d5c ("arm64: dts: allwinner: a64: add nodes necessary for analog sound support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Mark Brown Feb. 17, 2020, 2:56 p.m. UTC | #1 
On Mon, Feb 17, 2020 at 12:42:19AM -0600, Samuel Holland wrote:

> Cc: stable@kernel.org
> Fixes: ec4a95409d5c ("arm64: dts: allwinner: a64: add nodes necessary for analog sound support")
> Signed-off-by: Samuel Holland <samuel@sholland.org>

>  		codec: codec@1c22e00 {
>  			#sound-dai-cells = <0>;
> -			compatible = "allwinner,sun8i-a33-codec";
> +			compatible = "allwinner,sun50i-a64-codec";

This is an incompatible change in the ABI, it's going to break unless
it's applied at exactly the same time as the matching kernel update
adding the new compatible string.  That's not suitable for stable, you
need to keep the old compatible as a fallback.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 27e48234f1c2..6d7aa1736d21 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -802,7 +802,7 @@  dai: dai@1c22c00 {
 
 		codec: codec@1c22e00 {
 			#sound-dai-cells = <0>;
-			compatible = "allwinner,sun8i-a33-codec";
+			compatible = "allwinner,sun50i-a64-codec";
 			reg = <0x01c22e00 0x600>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;