@@ -99,7 +99,7 @@ config SND_SOC_MSM8996
config SND_SOC_SDM845
tristate "SoC Machine driver for SDM845 boards"
- depends on QCOM_APR && CROS_EC && I2C
+ depends on QCOM_APR && CROS_EC && I2C && SOUNDWIRE
select SND_SOC_QDSP6
select SND_SOC_QCOM_COMMON
select SND_SOC_RT5663
@@ -11,6 +11,7 @@
#include <sound/pcm_params.h>
#include <sound/jack.h>
#include <sound/soc.h>
+#include <linux/soundwire/sdw.h>
#include <uapi/linux/input-event-codes.h>
#include "common.h"
#include "qdsp6/q6afe.h"
@@ -31,10 +32,12 @@
struct sdm845_snd_data {
struct snd_soc_jack jack;
bool jack_setup;
+ bool stream_prepared[SLIM_MAX_RX_PORTS];
struct snd_soc_card *card;
uint32_t pri_mi2s_clk_count;
uint32_t sec_mi2s_clk_count;
uint32_t quat_tdm_clk_count;
+ struct sdw_stream_runtime *sruntime[SLIM_MAX_RX_PORTS];
};
static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28};
@@ -45,11 +48,18 @@ static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai;
+ struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS];
+ struct sdw_stream_runtime *sruntime;
u32 rx_ch_cnt = 0, tx_ch_cnt = 0;
int ret = 0, i;
for_each_rtd_codec_dais(rtd, i, codec_dai) {
+ sruntime = snd_soc_dai_get_sdw_stream(codec_dai,
+ substream->stream);
+ if (sruntime != ERR_PTR(-ENOTSUPP))
+ pdata->sruntime[cpu_dai->id] = sruntime;
+
ret = snd_soc_dai_get_channel_map(codec_dai,
&tx_ch_cnt, tx_ch, &rx_ch_cnt, rx_ch);
@@ -425,8 +435,65 @@ static void sdm845_snd_shutdown(struct snd_pcm_substream *substream)
}
}
+static int sdm845_snd_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+ int ret;
+
+ if (!sruntime)
+ return 0;
+
+ if (data->stream_prepared[cpu_dai->id]) {
+ sdw_disable_stream(sruntime);
+ sdw_deprepare_stream(sruntime);
+ data->stream_prepared[cpu_dai->id] = false;
+ }
+
+ ret = sdw_prepare_stream(sruntime);
+ if (ret)
+ return ret;
+
+ /**
+ * NOTE: there is a strict hw requirement about the ordering of port
+ * enables and actual WSA881x PA enable. PA enable should only happen
+ * after soundwire ports are enabled if not DC on the line is
+ * accumulated resulting in Click/Pop Noise
+ * PA enable/mute are handled as part of codec DAPM and digital mute.
+ */
+
+ ret = sdw_enable_stream(sruntime);
+ if (ret) {
+ sdw_deprepare_stream(sruntime);
+ return ret;
+ }
+ data->stream_prepared[cpu_dai->id] = true;
+
+ return ret;
+}
+
+static int sdm845_snd_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+ if (sruntime && data->stream_prepared[cpu_dai->id]) {
+ sdw_disable_stream(sruntime);
+ sdw_deprepare_stream(sruntime);
+ data->stream_prepared[cpu_dai->id] = false;
+ }
+
+ return 0;
+}
+
static const struct snd_soc_ops sdm845_be_ops = {
.hw_params = sdm845_snd_hw_params,
+ .hw_free = sdm845_snd_hw_free,
+ .prepare = sdm845_snd_prepare,
.startup = sdm845_snd_startup,
.shutdown = sdm845_snd_shutdown,
};
In existing setup WSA881x codec handles soundwire stream, however DB845c and other machines based on SDM845c have 2 instances for WSA881x codec. This will force soundwire stream to be prepared/enabled twice or multiple times. Handling SoundWire Stream in machine driver would fix this issue. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- sound/soc/qcom/Kconfig | 2 +- sound/soc/qcom/sdm845.c | 67 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+), 1 deletion(-)