@@ -164,6 +164,7 @@ config SND_FIREFACE
Say Y here to include support for RME fireface series.
* Fireface 400
* Fireface 800
+ * Fireface UFX
* Fireface UCX
* Fireface 802
@@ -199,7 +199,7 @@ static int latter_begin_session(struct snd_ff *ff, unsigned int rate)
else
return -EINVAL;
} else {
- // For Fireface 802. Due to bandwidth limitation on
+ // For Fireface UFX and 802. Due to bandwidth limitation on
// IEEE 1394a (400 Mbps), Analog 1-12 and AES are available
// without any ADAT at quadruple speed.
if (rate >= 32000 && rate <= 48000)
@@ -19,6 +19,7 @@ static void name_card(struct snd_ff *ff)
const char *const names[] = {
[SND_FF_UNIT_VERSION_FF800] = "Fireface800",
[SND_FF_UNIT_VERSION_FF400] = "Fireface400",
+ [SND_FF_UNIT_VERSION_UFX] = "FirefaceUFX",
[SND_FF_UNIT_VERSION_UCX] = "FirefaceUCX",
[SND_FF_UNIT_VERSION_802] = "Fireface802",
};
@@ -187,7 +188,7 @@ static const struct snd_ff_spec spec_ucx = {
.midi_rx_addrs = {0xffff00000030ull, 0xffff00000030ull},
};
-static const struct snd_ff_spec spec_802 = {
+static const struct snd_ff_spec spec_ufx_802 = {
.pcm_capture_channels = {30, 22, 14},
.pcm_playback_channels = {30, 22, 14},
.midi_in_ports = 1,
@@ -223,6 +224,18 @@ static const struct ieee1394_device_id snd_ff_id_table[] = {
.model_id = 0x101800,
.driver_data = (kernel_ulong_t)&spec_ff400,
},
+ // Fireface UFX.
+ {
+ .match_flags = IEEE1394_MATCH_VENDOR_ID |
+ IEEE1394_MATCH_SPECIFIER_ID |
+ IEEE1394_MATCH_VERSION |
+ IEEE1394_MATCH_MODEL_ID,
+ .vendor_id = OUI_RME,
+ .specifier_id = OUI_RME,
+ .version = SND_FF_UNIT_VERSION_UFX,
+ .model_id = 0x101800,
+ .driver_data = (kernel_ulong_t)&spec_ufx_802,
+ },
// Fireface UCX.
{
.match_flags = IEEE1394_MATCH_VENDOR_ID |
@@ -245,7 +258,7 @@ static const struct ieee1394_device_id snd_ff_id_table[] = {
.specifier_id = OUI_RME,
.version = SND_FF_UNIT_VERSION_802,
.model_id = 0x101800,
- .driver_data = (kernel_ulong_t)&spec_802,
+ .driver_data = (kernel_ulong_t)&spec_ufx_802,
},
{}
};
@@ -37,6 +37,7 @@
enum snd_ff_unit_version {
SND_FF_UNIT_VERSION_FF800 = 0x000001,
SND_FF_UNIT_VERSION_FF400 = 0x000002,
+ SND_FF_UNIT_VERSION_UFX = 0x000003,
SND_FF_UNIT_VERSION_UCX = 0x000004,
SND_FF_UNIT_VERSION_802 = 0x000005,
};
Fireface UFX was shipped by RME GmbH in 2010, and now discontinued. Although this model has some enhanced feature which Fireface 802 doesn't have (e.g. on-board USB mass storage device class, configuration interface with color display), the functionality relevant to packet communication on IEEE 1394 bus seems to be the same as Fireface 802 (e.g. available number of channels for PCM frame in each sampling transfer frequency). With the assumption, this commit adds support for Fireface UFX. In ALSA fireface driver, these two models are handled as the same one. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> --- sound/firewire/Kconfig | 1 + sound/firewire/fireface/ff-protocol-latter.c | 2 +- sound/firewire/fireface/ff.c | 17 +++++++++++++++-- sound/firewire/fireface/ff.h | 1 + 4 files changed, 18 insertions(+), 3 deletions(-)