diff mbox series

[19/28] ASoC: ux500: ux500_msp_i2s: Remove unused variables 'reg_val_DR' and 'reg_val_TSTDR'

Message ID 20200707101642.1747944-20-lee.jones@linaro.org (mailing list archive)
State New, archived
Headers show
Series Clean-up ASoC's W=1 build warnings | expand

Commit Message

Lee Jones July 7, 2020, 10:16 a.m. UTC 
Looks like these have been unchecked since the driver's inception in 2012.

Fixes the following W=1 kernel build warning(s):

 sound/soc/ux500/ux500_msp_i2s.c: In function ‘flush_fifo_rx’:
 sound/soc/ux500/ux500_msp_i2s.c:398:6: warning: variable ‘reg_val_DR’ set but not used [-Wunused-but-set-variable]
 sound/soc/ux500/ux500_msp_i2s.c: In function ‘flush_fifo_tx’:
 sound/soc/ux500/ux500_msp_i2s.c:415:6: warning: variable ‘reg_val_TSTDR’ set but not used [-Wunused-but-set-variable]

Cc: zhong jiang <zhongjiang@huawei.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Cc: Roger Nilsson <roger.xr.nilsson@stericsson.com>
Cc: Sandeep Kaushik <sandeep.kaushik@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 sound/soc/ux500/ux500_msp_i2s.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c
index 394d8b2a4a161..fd0b88bb79212 100644
--- a/sound/soc/ux500/ux500_msp_i2s.c
+++ b/sound/soc/ux500/ux500_msp_i2s.c
@@ -395,7 +395,7 @@  static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
 
 static void flush_fifo_rx(struct ux500_msp *msp)
 {
-	u32 reg_val_DR, reg_val_GCR, reg_val_FLR;
+	u32 reg_val_GCR, reg_val_FLR;
 	u32 limit = 32;
 
 	reg_val_GCR = readl(msp->registers + MSP_GCR);
@@ -403,7 +403,7 @@  static void flush_fifo_rx(struct ux500_msp *msp)
 
 	reg_val_FLR = readl(msp->registers + MSP_FLR);
 	while (!(reg_val_FLR & RX_FIFO_EMPTY) && limit--) {
-		reg_val_DR = readl(msp->registers + MSP_DR);
+		readl(msp->registers + MSP_DR);
 		reg_val_FLR = readl(msp->registers + MSP_FLR);
 	}
 
@@ -412,7 +412,7 @@  static void flush_fifo_rx(struct ux500_msp *msp)
 
 static void flush_fifo_tx(struct ux500_msp *msp)
 {
-	u32 reg_val_TSTDR, reg_val_GCR, reg_val_FLR;
+	u32 reg_val_GCR, reg_val_FLR;
 	u32 limit = 32;
 
 	reg_val_GCR = readl(msp->registers + MSP_GCR);
@@ -421,7 +421,7 @@  static void flush_fifo_tx(struct ux500_msp *msp)
 
 	reg_val_FLR = readl(msp->registers + MSP_FLR);
 	while (!(reg_val_FLR & TX_FIFO_EMPTY) && limit--) {
-		reg_val_TSTDR = readl(msp->registers + MSP_TSTDR);
+		readl(msp->registers + MSP_TSTDR);
 		reg_val_FLR = readl(msp->registers + MSP_FLR);
 	}
 	writel(0x0, msp->registers + MSP_ITCR);