| Message ID | 20200728160833.24130-1-dmurphy@ti.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 63b0383f3c1c32d7ff958bf3a58c58a84cbd7450 |
| Headers | show |
| Series | [1/2] dt-bindings: tlv320adcx140: Add GPO config and drive config | expand |
On Tue, 28 Jul 2020 11:08:32 -0500, Dan Murphy wrote: > Add properties for configuring the General Purpose Outputs (GPO). The > GPOs. There are 2 settings for each GPO, configuration and the output drive > type. Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/2] dt-bindings: tlv320adcx140: Add GPO config and drive config commit: 63b0383f3c1c32d7ff958bf3a58c58a84cbd7450 [2/2] ASoC: tlv320adcx140: Add GPO configuration and drive output config commit: 6617cff6a05e7e7a679499cb1d5cd2d3bc6390c3 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index 2e6ac5d2ee96..0950eb69f2b2 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -108,6 +108,32 @@ properties: maximum: 7 default: [0, 0, 0, 0] +patternProperties: + '^ti,gpo-config-[1-4]$': + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Defines the configuration and output driver for the general purpose + output pins (GPO). These values are pairs, the first value is for the + configuration type and the second value is for the output drive type. + The array is defined as <GPO_CFG GPO_DRV> + + GPO output configuration can be one of the following: + + 0 - (default) disabled + 1 - GPOX is configured as a general-purpose output (GPO) + 2 - GPOX is configured as a device interrupt output (IRQ) + 3 - GPOX is configured as a secondary ASI output (SDOUT2) + 4 - GPOX is configured as a PDM clock output (PDMCLK) + + GPO output drive configuration for the GPO pins can be one of the following: + + 0d - (default) Hi-Z output + 1d - Drive active low and active high + 2d - Drive active low and weak high + 3d - Drive active low and Hi-Z + 4d - Drive weak low and active high + 5d - Drive Hi-Z and active high + required: - compatible - reg @@ -124,6 +150,8 @@ examples: ti,mic-bias-source = <6>; ti,pdm-edge-select = <0 1 0 1>; ti,gpi-config = <4 5 6 7>; + ti,gpo-config-1 = <0 0>; + ti,gpo-config-2 = <0 0>; reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; };
Add properties for configuring the General Purpose Outputs (GPO). The GPOs. There are 2 settings for each GPO, configuration and the output drive type. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../bindings/sound/tlv320adcx140.yaml | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+)