new file mode 100644
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2020 Intel Corporation. All rights reserved.
+ *
+ * Author: Cezary Rojewski <cezary.rojewski@intel.com>
+ */
+
+#ifndef __SND_SOC_INTEL_CATPT_CORE_H
+#define __SND_SOC_INTEL_CATPT_CORE_H
+
+#include <linux/dma/dw.h>
+#include "registers.h"
+
+struct catpt_dev;
+
+void catpt_sram_init(struct resource *sram, u32 start, u32 size);
+void catpt_sram_free(struct resource *sram);
+struct resource *
+catpt_request_region(struct resource *root, resource_size_t size);
+
+static inline bool catpt_resource_overlapping(struct resource *r1,
+ struct resource *r2,
+ struct resource *ret)
+{
+ if (!resource_overlaps(r1, r2))
+ return false;
+ ret->start = max(r1->start, r2->start);
+ ret->end = min(r1->end, r2->end);
+ return true;
+}
+
+struct catpt_module_type {
+ bool loaded;
+ u32 entry_point;
+ u32 persistent_size;
+ u32 scratch_size;
+ /* DRAM, initial module state */
+ u32 state_offset;
+ u32 state_size;
+
+ struct list_head node;
+};
+
+struct catpt_spec {
+ struct snd_soc_acpi_mach *machines;
+ u8 core_id;
+ u32 host_dram_offset;
+ u32 host_iram_offset;
+ u32 host_shim_offset;
+ u32 host_dma_offset[CATPT_DMA_COUNT];
+ u32 host_ssp_offset[CATPT_SSP_COUNT];
+ u32 dram_mask;
+ u32 iram_mask;
+ void (*pll_shutdown)(struct catpt_dev *cdev, bool enable);
+ int (*power_up)(struct catpt_dev *cdev);
+ int (*power_down)(struct catpt_dev *cdev);
+};
+
+struct catpt_dev {
+ struct device *dev;
+ struct dw_dma_chip *dmac;
+
+ void __iomem *pci_ba;
+ void __iomem *lpe_ba;
+ u32 lpe_base;
+ int irq;
+
+ const struct catpt_spec *spec;
+ struct completion fw_ready;
+
+ struct resource dram;
+ struct resource iram;
+ struct resource *scratch;
+};
+
+int catpt_dmac_probe(struct catpt_dev *cdev);
+void catpt_dmac_remove(struct catpt_dev *cdev);
+struct dma_chan *catpt_dma_request_config_chan(struct catpt_dev *cdev);
+int catpt_dma_memcpy_todsp(struct catpt_dev *cdev, struct dma_chan *chan,
+ dma_addr_t dst_addr, dma_addr_t src_addr,
+ size_t size);
+int catpt_dma_memcpy_fromdsp(struct catpt_dev *cdev, struct dma_chan *chan,
+ dma_addr_t dst_addr, dma_addr_t src_addr,
+ size_t size);
+
+#endif
new file mode 100644
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright(c) 2020 Intel Corporation. All rights reserved.
+//
+// Author: Cezary Rojewski <cezary.rojewski@intel.com>
+//
+
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include "core.h"
+#include "registers.h"
+
+static bool catpt_dma_filter(struct dma_chan *chan, void *param)
+{
+ return param == chan->device->dev;
+}
+
+/*
+ * Either engine 0 or 1 can be used for image loading.
+ * Align with Windows driver equivalent and stick to engine 1.
+ */
+#define CATPT_DMA_DEVID 1
+#define CATPT_DMA_DSP_ADDR_MASK GENMASK(31, 20)
+
+struct dma_chan *catpt_dma_request_config_chan(struct catpt_dev *cdev)
+{
+ struct dma_slave_config config;
+ struct dma_chan *chan;
+ dma_cap_mask_t mask;
+ int ret;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+
+ chan = dma_request_channel(mask, catpt_dma_filter, cdev->dev);
+ if (!chan) {
+ dev_err(cdev->dev, "request channel failed\n");
+ return ERR_PTR(-EPROBE_DEFER);
+ }
+
+ memset(&config, 0, sizeof(config));
+ config.direction = DMA_MEM_TO_DEV;
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.src_maxburst = 16;
+ config.dst_maxburst = 16;
+
+ ret = dmaengine_slave_config(chan, &config);
+ if (ret) {
+ dev_err(cdev->dev, "slave config failed: %d\n", ret);
+ dma_release_channel(chan);
+ return ERR_PTR(ret);
+ }
+
+ return chan;
+}
+
+static int catpt_dma_memcpy(struct catpt_dev *cdev, struct dma_chan *chan,
+ dma_addr_t dst_addr, dma_addr_t src_addr,
+ size_t size)
+{
+ struct dma_async_tx_descriptor *desc;
+ enum dma_status status;
+
+ desc = dmaengine_prep_dma_memcpy(chan, dst_addr, src_addr, size,
+ DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(cdev->dev, "prep dma memcpy failed\n");
+ return -EIO;
+ }
+
+ /* enable demand mode for dma channel */
+ catpt_updatel_shim(cdev, HMDC,
+ CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id),
+ CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id));
+ dmaengine_submit(desc);
+ status = dma_wait_for_async_tx(desc);
+ /* regardless of status, disable access to HOST memory in demand mode */
+ catpt_updatel_shim(cdev, HMDC,
+ CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id), 0);
+
+ return (status == DMA_COMPLETE) ? 0 : -EPROTO;
+}
+
+int catpt_dma_memcpy_todsp(struct catpt_dev *cdev, struct dma_chan *chan,
+ dma_addr_t dst_addr, dma_addr_t src_addr,
+ size_t size)
+{
+ return catpt_dma_memcpy(cdev, chan, dst_addr | CATPT_DMA_DSP_ADDR_MASK,
+ src_addr, size);
+}
+
+int catpt_dma_memcpy_fromdsp(struct catpt_dev *cdev, struct dma_chan *chan,
+ dma_addr_t dst_addr, dma_addr_t src_addr,
+ size_t size)
+{
+ return catpt_dma_memcpy(cdev, chan, dst_addr,
+ src_addr | CATPT_DMA_DSP_ADDR_MASK, size);
+}
+
+int catpt_dmac_probe(struct catpt_dev *cdev)
+{
+ struct dw_dma_chip *dmac;
+ int ret;
+
+ dmac = devm_kzalloc(cdev->dev, sizeof(*dmac), GFP_KERNEL);
+ if (!dmac)
+ return -ENOMEM;
+
+ dmac->regs = cdev->lpe_ba + cdev->spec->host_dma_offset[CATPT_DMA_DEVID];
+ dmac->dev = cdev->dev;
+ dmac->irq = cdev->irq;
+
+ ret = dma_coerce_mask_and_coherent(cdev->dev, DMA_BIT_MASK(31));
+ if (ret)
+ return ret;
+ /*
+ * Caller is responsible for putting device in D0 to allow
+ * for I/O and memory access before probing DW.
+ */
+ ret = dw_dma_probe(dmac);
+ if (ret)
+ return ret;
+
+ cdev->dmac = dmac;
+ return 0;
+}
+
+void catpt_dmac_remove(struct catpt_dev *cdev)
+{
+ /*
+ * As do_dma_remove() juggles with pm_runtime_get_xxx() and
+ * pm_runtime_put_xxx() while both ADSP and DW 'devices' are part of
+ * the same module, caller makes sure pm_runtime_disable() is invoked
+ * before removing DW to prevent postmortem resume and suspend.
+ */
+ dw_dma_remove(cdev->dmac);
+}
new file mode 100644
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright(c) 2020 Intel Corporation. All rights reserved.
+//
+// Author: Cezary Rojewski <cezary.rojewski@intel.com>
+//
+
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include "core.h"
+
+void catpt_sram_init(struct resource *sram, u32 start, u32 size)
+{
+ sram->start = start;
+ sram->end = start + size - 1;
+}
+
+void catpt_sram_free(struct resource *sram)
+{
+ struct resource *res, *save;
+
+ for (res = sram->child; res;) {
+ save = res->sibling;
+ release_resource(res);
+ kfree(res);
+ res = save;
+ }
+}
+
+struct resource *
+catpt_request_region(struct resource *root, resource_size_t size)
+{
+ struct resource *res = root->child;
+ resource_size_t addr = root->start;
+
+ for (;;) {
+ if (res->start - addr >= size)
+ break;
+ addr = res->end + 1;
+ res = res->sibling;
+ if (!res)
+ return NULL;
+ }
+
+ return __request_region(root, addr, size, NULL, 0);
+}
new file mode 100644
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2020 Intel Corporation. All rights reserved.
+ *
+ * Author: Cezary Rojewski <cezary.rojewski@intel.com>
+ */
+
+#ifndef __SND_SOC_INTEL_CATPT_REGS_H
+#define __SND_SOC_INTEL_CATPT_REGS_H
+
+#include <linux/bitops.h>
+#include <linux/iopoll.h>
+#include <uapi/linux/pci_regs.h>
+
+#define CATPT_SHIM_REGS_SIZE 4096
+#define CATPT_DMA_REGS_SIZE 1024
+#define CATPT_DMA_COUNT 2
+#define CATPT_SSP_COUNT 2
+#define CATPT_SSP_REGS_SIZE 512
+
+/* DSP Shim registers */
+
+#define CATPT_SHIM_CS1 0x00
+#define CATPT_SHIM_ISC 0x18
+#define CATPT_SHIM_ISD 0x20
+#define CATPT_SHIM_IMC 0x28
+#define CATPT_SHIM_IMD 0x30
+#define CATPT_SHIM_IPCC 0x38
+#define CATPT_SHIM_IPCD 0x40
+#define CATPT_SHIM_CLKCTL 0x78
+#define CATPT_SHIM_CS2 0x80
+#define CATPT_SHIM_LTRC 0xE0
+#define CATPT_SHIM_HMDC 0xE8
+
+#define CATPT_CS_LPCS BIT(31)
+#define CATPT_CS_SFCR(ssp) BIT(27 + (ssp))
+#define CATPT_CS_S1IOCS BIT(23)
+#define CATPT_CS_S0IOCS BIT(21)
+#define CATPT_CS_PCE BIT(15)
+#define CATPT_CS_SDPM(ssp) BIT(11 + (ssp))
+#define CATPT_CS_STALL BIT(10)
+#define CATPT_CS_DCS GENMASK(6, 4)
+/* b100 DSP core & audio fabric high clock */
+#define CATPT_CS_DCS_HIGH (0x4 << 4)
+#define CATPT_CS_SBCS(ssp) BIT(2 + (ssp))
+#define CATPT_CS_RST BIT(1)
+
+#define CATPT_ISC_IPCDB BIT(1)
+#define CATPT_ISC_IPCCD BIT(0)
+#define CATPT_ISD_DCPWM BIT(31)
+#define CATPT_ISD_IPCCB BIT(1)
+#define CATPT_ISD_IPCDD BIT(0)
+
+#define CATPT_IMC_IPCDB BIT(1)
+#define CATPT_IMC_IPCCD BIT(0)
+#define CATPT_IMD_IPCCB BIT(1)
+#define CATPT_IMD_IPCDD BIT(0)
+
+#define CATPT_IPCC_BUSY BIT(31)
+#define CATPT_IPCC_DONE BIT(30)
+#define CATPT_IPCD_BUSY BIT(31)
+#define CATPT_IPCD_DONE BIT(30)
+
+#define CATPT_CLKCTL_CFCIP BIT(31)
+#define CATPT_CLKCTL_SMOS GENMASK(25, 24)
+
+#define CATPT_HMDC_HDDA(e, ch) BIT(8 * (e) + (ch))
+
+/* defaults to reset SHIM registers to after each power cycle */
+#define CATPT_CS_DEFAULT 0x8480040E
+#define CATPT_ISC_DEFAULT 0x0
+#define CATPT_ISD_DEFAULT 0x0
+#define CATPT_IMC_DEFAULT 0x7FFF0003
+#define CATPT_IMD_DEFAULT 0x7FFF0003
+#define CATPT_IPCC_DEFAULT 0x0
+#define CATPT_IPCD_DEFAULT 0x0
+#define CATPT_CLKCTL_DEFAULT 0x7FF
+#define CATPT_CS2_DEFAULT 0x0
+#define CATPT_LTRC_DEFAULT 0x0
+#define CATPT_HMDC_DEFAULT 0x0
+
+/* PCI Configuration registers */
+
+#define CATPT_PCI_PMCAPID 0x80
+#define CATPT_PCI_PMCS (CATPT_PCI_PMCAPID + PCI_PM_CTRL)
+#define CATPT_PCI_VDRTCTL0 0xA0
+#define CATPT_PCI_VDRTCTL2 0xA8
+
+#define CATPT_VDRTCTL2_DTCGE BIT(10)
+#define CATPT_VDRTCTL2_DCLCGE BIT(1)
+#define CATPT_VDRTCTL2_CGEALL 0xF7F
+
+/* LPT PCI Configuration bits */
+
+#define LPT_VDRTCTL0_DSRAMPGE(b) BIT(16 + (b))
+#define LPT_VDRTCTL0_DSRAMPGE_MASK GENMASK(31, 16)
+#define LPT_VDRTCTL0_ISRAMPGE(b) BIT(6 + (b))
+#define LPT_VDRTCTL0_ISRAMPGE_MASK GENMASK(15, 6)
+#define LPT_VDRTCTL0_D3SRAMPGD BIT(2)
+#define LPT_VDRTCTL0_D3PGD BIT(1)
+#define LPT_VDRTCTL0_APLLSE BIT(0)
+
+/* WPT PCI Configuration bits */
+
+#define WPT_VDRTCTL0_DSRAMPGE(b) BIT(12 + (b))
+#define WPT_VDRTCTL0_DSRAMPGE_MASK GENMASK(31, 12)
+#define WPT_VDRTCTL0_ISRAMPGE(b) BIT(2 + (b))
+#define WPT_VDRTCTL0_ISRAMPGE_MASK GENMASK(11, 2)
+#define WPT_VDRTCTL0_D3SRAMPGD BIT(1)
+#define WPT_VDRTCTL0_D3PGD BIT(0)
+
+#define WPT_VDRTCTL2_APLLSE BIT(31)
+
+/* defaults to reset SSP registers to after each power cycle */
+#define CATPT_SSC0_DEFAULT 0x0
+#define CATPT_SSC1_DEFAULT 0x0
+#define CATPT_SSS_DEFAULT 0xF004
+#define CATPT_SSIT_DEFAULT 0x0
+#define CATPT_SSD_DEFAULT 0xC43893A3
+#define CATPT_SSTO_DEFAULT 0x0
+#define CATPT_SSPSP_DEFAULT 0x0
+#define CATPT_SSTSA_DEFAULT 0x0
+#define CATPT_SSRSA_DEFAULT 0x0
+#define CATPT_SSTSS_DEFAULT 0x0
+#define CATPT_SSCR2_DEFAULT 0x0
+#define CATPT_SSPSP2_DEFAULT 0x0
+
+/* Physically the same block, access address differs between host and dsp */
+#define CATPT_DSP_DRAM_OFFSET 0x400000
+#define catpt_to_host_offset(offset) ((offset) & ~(CATPT_DSP_DRAM_OFFSET))
+#define catpt_to_dsp_offset(offset) ((offset) | CATPT_DSP_DRAM_OFFSET)
+
+#define CATPT_MEMBLOCK_SIZE 0x8000
+#define catpt_num_dram(cdev) (hweight_long((cdev)->spec->dram_mask))
+#define catpt_num_iram(cdev) (hweight_long((cdev)->spec->iram_mask))
+#define catpt_dram_size(cdev) (catpt_num_dram(cdev) * CATPT_MEMBLOCK_SIZE)
+#define catpt_iram_size(cdev) (catpt_num_iram(cdev) * CATPT_MEMBLOCK_SIZE)
+
+/* registry I/O helpers */
+
+#define catpt_shim_addr(cdev) \
+ ((cdev)->lpe_ba + (cdev)->spec->host_shim_offset)
+#define catpt_dma_addr(cdev, dma) \
+ ((cdev)->lpe_ba + (cdev)->spec->host_dma_offset[dma])
+#define catpt_ssp_addr(cdev, ssp) \
+ ((cdev)->lpe_ba + (cdev)->spec->host_ssp_offset[ssp])
+#define catpt_inbox_addr(cdev) \
+ ((cdev)->lpe_ba + (cdev)->ipc.config.inbox_offset)
+#define catpt_outbox_addr(cdev) \
+ ((cdev)->lpe_ba + (cdev)->ipc.config.outbox_offset)
+
+#define catpt_writel_ssp(cdev, ssp, reg, val) \
+ writel(val, catpt_ssp_addr(cdev, ssp) + (reg))
+
+#define catpt_readl_shim(cdev, reg) \
+ readl(catpt_shim_addr(cdev) + CATPT_SHIM_##reg)
+#define catpt_writel_shim(cdev, reg, val) \
+ writel(val, catpt_shim_addr(cdev) + CATPT_SHIM_##reg)
+#define catpt_updatel_shim(cdev, reg, mask, val) \
+ catpt_writel_shim(cdev, reg, \
+ (catpt_readl_shim(cdev, reg) & ~(mask)) | (val))
+
+#define catpt_readl_poll_shim(cdev, reg, val, cond, delay_us, timeout_us) \
+ readl_poll_timeout(catpt_shim_addr(cdev) + CATPT_SHIM_##reg, \
+ val, cond, delay_us, timeout_us)
+
+#define catpt_readl_pci(cdev, reg) \
+ readl(cdev->pci_ba + CATPT_PCI_##reg)
+#define catpt_writel_pci(cdev, reg, val) \
+ writel(val, cdev->pci_ba + CATPT_PCI_##reg)
+#define catpt_updatel_pci(cdev, reg, mask, val) \
+ catpt_writel_pci(cdev, reg, \
+ (catpt_readl_pci(cdev, reg) & ~(mask)) | (val))
+
+#define catpt_readl_poll_pci(cdev, reg, val, cond, delay_us, timeout_us) \
+ readl_poll_timeout((cdev)->pci_ba + CATPT_PCI_##reg, \
+ val, cond, delay_us, timeout_us)
+
+#endif
Declare base structures, registers and extension routines for the catpt solution. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> --- sound/soc/intel/catpt/core.h | 86 ++++++++++++++ sound/soc/intel/catpt/dsp.c | 138 +++++++++++++++++++++++ sound/soc/intel/catpt/loader.c | 46 ++++++++ sound/soc/intel/catpt/registers.h | 179 ++++++++++++++++++++++++++++++ 4 files changed, 449 insertions(+) create mode 100644 sound/soc/intel/catpt/core.h create mode 100644 sound/soc/intel/catpt/dsp.c create mode 100644 sound/soc/intel/catpt/loader.c create mode 100644 sound/soc/intel/catpt/registers.h