Message ID | 20210112203250.2576775-2-arnd@kernel.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/2,v2] ALSA: hda: fix SND_INTEL_DSP_CONFIG dependency | expand |
On 1/12/21 2:32 PM, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The Kconfig logic around SND_SOC_SOF_INTEL_SOUNDWIRE tries to > ensure that all sound modules can be built with the minimal > dependencies, but this fails in some configurations: > > x86_64-linux-ld: sound/hda/intel-dsp-config.o: in function `snd_intel_dsp_driver_probe': > intel-dsp-config.c:(.text+0x134): undefined reference to `sdw_intel_acpi_scan' > > Specifically, this happens if the dsp-config driver is built-in but does > not need to use soundwire, while CONFIG_SOUNDWIRE_INTEL is enabled as > a loadable module. > > An easier and more correct way to do this is to remove > CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK and instead have > the two drivers that can link against SOUNDWIRE_INTEL, > i.e. DSP_CONFIG and SND_SOC_SOF_HDA, select that driver whenever > SND_SOC_SOF_INTEL_SOUNDWIRE_LINK is set. > > This however means that SND_SOC_SOF_INTEL_SOUNDWIRE cannot be selected > by users when SOUNDWIRE is only usable by loadable modules and one or > more drivers using SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE is built-in. The problem is real, but the proposal isn't completely right, there is absolutely no logical link or functional dependency between INTEL_DSP_CONFIG and SOUNDWIRE. We have a similar case with HDaudio, the two buses can be selected as tristates, but the SOF configuration needs to match. In both cases, either we add a 'depends' and users need to make sure the configurations match on the two sides. Or we use select but one of the selections will be overridden and becomes meaningless. Arnd, do you mind if I give it a try on my side? > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- > sound/hda/Kconfig | 1 + > sound/soc/sof/intel/Kconfig | 16 ++++++---------- > 2 files changed, 7 insertions(+), 10 deletions(-) > > diff --git a/sound/hda/Kconfig b/sound/hda/Kconfig > index 3bc9224d5e4f..ecab814d7698 100644 > --- a/sound/hda/Kconfig > +++ b/sound/hda/Kconfig > @@ -44,5 +44,6 @@ config SND_INTEL_NHLT > config SND_INTEL_DSP_CONFIG > tristate > select SND_INTEL_NHLT if ACPI > + select SOUNDWIRE_INTEL if SND_SOC_SOF_INTEL_SOUNDWIRE > # this config should be selected only for Intel DSP platforms. > # A fallback is provided so that the code compiles in all cases. > diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig > index 67365ce0d86d..df8f9760870e 100644 > --- a/sound/soc/sof/intel/Kconfig > +++ b/sound/soc/sof/intel/Kconfig > @@ -330,13 +330,17 @@ config SND_SOC_SOF_HDA > tristate > select SND_HDA_EXT_CORE if SND_SOC_SOF_HDA_LINK > select SND_SOC_HDAC_HDA if SND_SOC_SOF_HDA_AUDIO_CODEC > + select SOUNDWIRE_INTEL if SND_SOC_SOF_INTEL_SOUNDWIRE > help > This option is not user-selectable but automagically handled by > 'select' statements at a higher level. > > -config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK > +config SND_SOC_SOF_INTEL_SOUNDWIRE > bool "SOF support for SoundWire" > - depends on SOUNDWIRE && ACPI > + depends on SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE > + depends on SOUNDWIRE > + depends on ACPI > + depends on !(SOUNDWIRE=m && SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y) > help > This adds support for SoundWire with Sound Open Firmware > for Intel(R) platforms. > @@ -345,14 +349,6 @@ config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK > > config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE > tristate > - select SND_SOC_SOF_INTEL_SOUNDWIRE if SND_SOC_SOF_INTEL_SOUNDWIRE_LINK > - help > - This option is not user-selectable but automagically handled by > - 'select' statements at a higher level. > - > -config SND_SOC_SOF_INTEL_SOUNDWIRE > - tristate > - select SOUNDWIRE_INTEL > help > This option is not user-selectable but automagically handled by > 'select' statements at a higher level. >
On Tue, Jan 12, 2021 at 10:03 PM Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> wrote: > On 1/12/21 2:32 PM, Arnd Bergmann wrote: > > From: Arnd Bergmann <arnd@arndb.de> > > > > The Kconfig logic around SND_SOC_SOF_INTEL_SOUNDWIRE tries to > > ensure that all sound modules can be built with the minimal > > dependencies, but this fails in some configurations: > > > > x86_64-linux-ld: sound/hda/intel-dsp-config.o: in function `snd_intel_dsp_driver_probe': > > intel-dsp-config.c:(.text+0x134): undefined reference to `sdw_intel_acpi_scan' > > > > Specifically, this happens if the dsp-config driver is built-in but does > > not need to use soundwire, while CONFIG_SOUNDWIRE_INTEL is enabled as > > a loadable module. > > > > An easier and more correct way to do this is to remove > > CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK and instead have > > the two drivers that can link against SOUNDWIRE_INTEL, > > i.e. DSP_CONFIG and SND_SOC_SOF_HDA, select that driver whenever > > SND_SOC_SOF_INTEL_SOUNDWIRE_LINK is set. > > > > This however means that SND_SOC_SOF_INTEL_SOUNDWIRE cannot be selected > > by users when SOUNDWIRE is only usable by loadable modules and one or > > more drivers using SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE is built-in. > > The problem is real, but the proposal isn't completely right, there is > absolutely no logical link or functional dependency between > INTEL_DSP_CONFIG and SOUNDWIRE. If that is true, would it be possible to move the call to sdw_intel_acpi_scan() out of these drivers and one layer higher where the dependency actually is? I was indeed wondering whether the intel-dsp-config.c is just another layering violation: this is another generic piece of code that seems to contain too much knowledge about specific hardware implementations. > We have a similar case with HDaudio, the two buses can be selected as > tristates, but the SOF configuration needs to match. > > In both cases, either we add a 'depends' and users need to make sure the > configurations match on the two sides. Or we use select but one of the > selections will be overridden and becomes meaningless. Maybe something like this: config SND_SOC_SOF_INTEL_SOUNDWIRE - bool "SOF support for SoundWire" + tristate "SOF support for SoundWire" - depends on SOUNDWIRE && ACPI + depends on SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE + depends on SOUNDWIRE + depends on ACPI + depends on !(SOUNDWIRE=m && SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y) + select SOUNDWIRE_INTEL I have not tried it, but that should keep it all in one place. > Arnd, do you mind if I give it a try on my side? I have no specific attachment to my patch, this was just what I came up with to fix the build regression locally. Arnd
On Tue, Jan 12, 2021 at 11:36:15PM +0100, Arnd Bergmann wrote: > I was indeed wondering whether the intel-dsp-config.c is just > another layering violation: this is another generic piece > of code that seems to contain too much knowledge about > specific hardware implementations. The purpose of that code is to try to figure out which of the multiple sets of drivers and firmwares available for Intel systems it's best to run on any given system by default and choose between them at runtime (or allow that choice to be overridden by users) so it's all about knowing about specific hardware implementations.
diff --git a/sound/hda/Kconfig b/sound/hda/Kconfig index 3bc9224d5e4f..ecab814d7698 100644 --- a/sound/hda/Kconfig +++ b/sound/hda/Kconfig @@ -44,5 +44,6 @@ config SND_INTEL_NHLT config SND_INTEL_DSP_CONFIG tristate select SND_INTEL_NHLT if ACPI + select SOUNDWIRE_INTEL if SND_SOC_SOF_INTEL_SOUNDWIRE # this config should be selected only for Intel DSP platforms. # A fallback is provided so that the code compiles in all cases. diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig index 67365ce0d86d..df8f9760870e 100644 --- a/sound/soc/sof/intel/Kconfig +++ b/sound/soc/sof/intel/Kconfig @@ -330,13 +330,17 @@ config SND_SOC_SOF_HDA tristate select SND_HDA_EXT_CORE if SND_SOC_SOF_HDA_LINK select SND_SOC_HDAC_HDA if SND_SOC_SOF_HDA_AUDIO_CODEC + select SOUNDWIRE_INTEL if SND_SOC_SOF_INTEL_SOUNDWIRE help This option is not user-selectable but automagically handled by 'select' statements at a higher level. -config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK +config SND_SOC_SOF_INTEL_SOUNDWIRE bool "SOF support for SoundWire" - depends on SOUNDWIRE && ACPI + depends on SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE + depends on SOUNDWIRE + depends on ACPI + depends on !(SOUNDWIRE=m && SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y) help This adds support for SoundWire with Sound Open Firmware for Intel(R) platforms. @@ -345,14 +349,6 @@ config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE tristate - select SND_SOC_SOF_INTEL_SOUNDWIRE if SND_SOC_SOF_INTEL_SOUNDWIRE_LINK - help - This option is not user-selectable but automagically handled by - 'select' statements at a higher level. - -config SND_SOC_SOF_INTEL_SOUNDWIRE - tristate - select SOUNDWIRE_INTEL help This option is not user-selectable but automagically handled by 'select' statements at a higher level.