diff mbox series

[v3,07/15] ASoC: cs42l42: Disable regulators if probe fails

Message ID 20210306185553.62053-8-tanureal@opensource.cirrus.com (mailing list archive)
State Accepted
Commit 1abca8e1c77bd9c5f5c0bed21c5b075b6852a178
Headers show
Series Report jack and button detection + Capture Support | expand

Commit Message

Lucas Tanure March 6, 2021, 6:55 p.m. UTC
In case of cs42l42_i2c_probe() fail, the regulators were left enabled.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
Changes in v3:
- No changes

Changes in v2:
- No changes

 sound/soc/codecs/cs42l42.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index f61404de139b0..81cdd09d80bb3 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1750,8 +1750,10 @@  static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
 	/* Reset the Device */
 	cs42l42->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev,
 		"reset", GPIOD_OUT_LOW);
-	if (IS_ERR(cs42l42->reset_gpio))
-		return PTR_ERR(cs42l42->reset_gpio);
+	if (IS_ERR(cs42l42->reset_gpio)) {
+		ret = PTR_ERR(cs42l42->reset_gpio);
+		goto err_disable;
+	}
 
 	if (cs42l42->reset_gpio) {
 		dev_dbg(&i2c_client->dev, "Found reset GPIO\n");
@@ -1785,13 +1787,13 @@  static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
 		dev_err(&i2c_client->dev,
 			"CS42L42 Device ID (%X). Expected %X\n",
 			devid, CS42L42_CHIP_ID);
-		return ret;
+		goto err_disable;
 	}
 
 	ret = regmap_read(cs42l42->regmap, CS42L42_REVID, &reg);
 	if (ret < 0) {
 		dev_err(&i2c_client->dev, "Get Revision ID failed\n");
-		return ret;
+		goto err_disable;
 	}
 
 	dev_info(&i2c_client->dev,
@@ -1817,7 +1819,7 @@  static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
 	if (i2c_client->dev.of_node) {
 		ret = cs42l42_handle_device_data(i2c_client, cs42l42);
 		if (ret != 0)
-			return ret;
+			goto err_disable;
 	}
 
 	/* Setup headset detection */