| Message ID | 20210524152533.7479-1-peter.ujfalusi@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ALSA: hda: Add Lenovo ThinkStation P340 to power_save_denylist | expand |
On Mon, 24 May 2021 17:25:33 +0200, Peter Ujfalusi wrote: > > On playback start there is a huge plock/pop noise via the green jack used > in Line out mode. > > The only way I was able to fix it to set the power_save to 0 for the > snd_hda_intel. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> > --- > Hi Takashi, > > Changes since RFC: > - Fixed up the PCI ID > > ever since I have this workstation (three weeks) the plock/pop noise on playback > start bugged me. So far the only solution I have found is to disable the > power_save which I find acceptable on a desktop compared to the pops. > > The alsa-info.sh output is can be found here: > http://alsa-project.org/db/?f=414b1b236fc73db386ad4f938bc3b304f6b30b05 > > Missing details from alsa-info output: > # lspci -nnk | grep -A2 Audio > 00:1f.3 Audio device [0403]: Intel Corporation Comet Lake PCH cAVS [8086:06c8] > DeviceName: Onboard - Sound > Subsystem: Lenovo Device [17aa:1048] > > CPU: i9-10900k > > The machine have ALC623 codec and the jacks are correctly discovered and they > do what they supposed to be. > When I have the headset connected to the front and audio is routed there the > line out (green jack) from the back still prodices the plock/pop. > > Is there a known quirk for similar issue or a better way to handle it? In general, this deny list is the last resort when we couldn't find any other way to fix the click noise. Let's check other possibilities at first, e.g. setting auto_mute_via_amp flag. This can be achieved even via hints in an early patching specified via "patch" option of snd-hda-intel module (see Documentation/sound/hda/notes.rst for some information). Takashi
On 5/25/2021 10:19 AM, Takashi Iwai wrote: > On Mon, 24 May 2021 17:25:33 +0200, > Peter Ujfalusi wrote: >> >> On playback start there is a huge plock/pop noise via the green jack used >> in Line out mode. >> >> The only way I was able to fix it to set the power_save to 0 for the >> snd_hda_intel. >> >> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> >> --- >> Hi Takashi, >> >> Changes since RFC: >> - Fixed up the PCI ID >> >> ever since I have this workstation (three weeks) the plock/pop noise on playback >> start bugged me. So far the only solution I have found is to disable the >> power_save which I find acceptable on a desktop compared to the pops. >> >> The alsa-info.sh output is can be found here: >> http://alsa-project.org/db/?f=414b1b236fc73db386ad4f938bc3b304f6b30b05 >> >> Missing details from alsa-info output: >> # lspci -nnk | grep -A2 Audio >> 00:1f.3 Audio device [0403]: Intel Corporation Comet Lake PCH cAVS [8086:06c8] >> DeviceName: Onboard - Sound >> Subsystem: Lenovo Device [17aa:1048] >> >> CPU: i9-10900k >> >> The machine have ALC623 codec and the jacks are correctly discovered and they >> do what they supposed to be. >> When I have the headset connected to the front and audio is routed there the >> line out (green jack) from the back still prodices the plock/pop. >> >> Is there a known quirk for similar issue or a better way to handle it? > > In general, this deny list is the last resort when we couldn't find > any other way to fix the click noise. Sure, I'm not that familiar yet with the HDA code base. > Let's check other possibilities > at first, e.g. setting auto_mute_via_amp flag. This can be achieved > even via hints in an early patching specified via "patch" option of > snd-hda-intel module (see Documentation/sound/hda/notes.rst for some > information). Unfortunately the auto_mute_via_amp has no effect on the pop. line_in_auto_switch and pin_amp_workaround have no effect either. fwiw, a simple cat /proc/asound/card0/codec#0 generates plock/pop.
On Tue, 25 May 2021 10:14:26 +0200, Ujfalusi, Peter wrote: > > > > On 5/25/2021 10:19 AM, Takashi Iwai wrote: > > On Mon, 24 May 2021 17:25:33 +0200, > > Peter Ujfalusi wrote: > >> > >> On playback start there is a huge plock/pop noise via the green jack used > >> in Line out mode. > >> > >> The only way I was able to fix it to set the power_save to 0 for the > >> snd_hda_intel. > >> > >> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> > >> --- > >> Hi Takashi, > >> > >> Changes since RFC: > >> - Fixed up the PCI ID > >> > >> ever since I have this workstation (three weeks) the plock/pop noise on playback > >> start bugged me. So far the only solution I have found is to disable the > >> power_save which I find acceptable on a desktop compared to the pops. > >> > >> The alsa-info.sh output is can be found here: > >> http://alsa-project.org/db/?f=414b1b236fc73db386ad4f938bc3b304f6b30b05 > >> > >> Missing details from alsa-info output: > >> # lspci -nnk | grep -A2 Audio > >> 00:1f.3 Audio device [0403]: Intel Corporation Comet Lake PCH cAVS [8086:06c8] > >> DeviceName: Onboard - Sound > >> Subsystem: Lenovo Device [17aa:1048] > >> > >> CPU: i9-10900k > >> > >> The machine have ALC623 codec and the jacks are correctly discovered and they > >> do what they supposed to be. > >> When I have the headset connected to the front and audio is routed there the > >> line out (green jack) from the back still prodices the plock/pop. > >> > >> Is there a known quirk for similar issue or a better way to handle it? > > > > In general, this deny list is the last resort when we couldn't find > > any other way to fix the click noise. > > Sure, I'm not that familiar yet with the HDA code base. > > > Let's check other possibilities > > at first, e.g. setting auto_mute_via_amp flag. This can be achieved > > even via hints in an early patching specified via "patch" option of > > snd-hda-intel module (see Documentation/sound/hda/notes.rst for some > > information). > > Unfortunately the auto_mute_via_amp has no effect on the pop. > line_in_auto_switch and pin_amp_workaround have no effect either. How about applying alc_fixup_no_shutup() or alc_fixup_disable_aamix()? Takashi
On 5/25/2021 11:23 AM, Takashi Iwai wrote: >>> Let's check other possibilities >>> at first, e.g. setting auto_mute_via_amp flag. This can be achieved >>> even via hints in an early patching specified via "patch" option of >>> snd-hda-intel module (see Documentation/sound/hda/notes.rst for some >>> information). >> >> Unfortunately the auto_mute_via_amp has no effect on the pop. >> line_in_auto_switch and pin_amp_workaround have no effect either. > > How about applying alc_fixup_no_shutup() or alc_fixup_disable_aamix()? it looks like SND_PCI_QUIRK(0x17aa, 0x1048, "Lenovo ThinkStation P340", ALC269_FIXUP_NO_SHUTUP), in alc269_fixup_tbl[] alone fixes the pop noise, I'll send a new patch to do this instead. Thanks, Péter
On Tue, 25 May 2021 11:04:14 +0200, Ujfalusi, Peter wrote: > > > > On 5/25/2021 11:23 AM, Takashi Iwai wrote: > >>> Let's check other possibilities > >>> at first, e.g. setting auto_mute_via_amp flag. This can be achieved > >>> even via hints in an early patching specified via "patch" option of > >>> snd-hda-intel module (see Documentation/sound/hda/notes.rst for some > >>> information). > >> > >> Unfortunately the auto_mute_via_amp has no effect on the pop. > >> line_in_auto_switch and pin_amp_workaround have no effect either. > > > > How about applying alc_fixup_no_shutup() or alc_fixup_disable_aamix()? > > it looks like > > SND_PCI_QUIRK(0x17aa, 0x1048, "Lenovo ThinkStation P340", > ALC269_FIXUP_NO_SHUTUP), > > in alc269_fixup_tbl[] > > alone fixes the pop noise, I'll send a new patch to do this instead. Good to hear. But, there is already a quirk entry for this ID, so you'll need to put a chain there instead, I suppose. Takashi
On 5/25/2021 12:18 PM, Takashi Iwai wrote: > On Tue, 25 May 2021 11:04:14 +0200, > Ujfalusi, Peter wrote: >> >> >> >> On 5/25/2021 11:23 AM, Takashi Iwai wrote: >>>>> Let's check other possibilities >>>>> at first, e.g. setting auto_mute_via_amp flag. This can be achieved >>>>> even via hints in an early patching specified via "patch" option of >>>>> snd-hda-intel module (see Documentation/sound/hda/notes.rst for some >>>>> information). >>>> >>>> Unfortunately the auto_mute_via_amp has no effect on the pop. >>>> line_in_auto_switch and pin_amp_workaround have no effect either. >>> >>> How about applying alc_fixup_no_shutup() or alc_fixup_disable_aamix()? >> >> it looks like >> >> SND_PCI_QUIRK(0x17aa, 0x1048, "Lenovo ThinkStation P340", >> ALC269_FIXUP_NO_SHUTUP), >> >> in alc269_fixup_tbl[] >> >> alone fixes the pop noise, I'll send a new patch to do this instead. > > Good to hear. > > But, there is already a quirk entry for this ID, so you'll need to put > a chain there instead, I suppose. Adding Hui Wang who added old fixup fir the mics. Oh, I see. It might be that the "ThinkCentre Station" is actually refers to "ThinkStation P340" in that case I wonder if the plock/pop can be observed by Hui Wang as well and confirm that it is the same model. do you have any suggestion on naming the chain for the P340 headset-mic and no-plop on lineout fixup enum/text/entry?
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 79ade335c8a0..9cacd1cb211b 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2213,6 +2213,8 @@ static const struct snd_pci_quirk power_save_denylist[] = { SND_PCI_QUIRK(0x17aa, 0x36a7, "Lenovo C50 All in one", 0), /* https://bugs.launchpad.net/bugs/1821663 */ SND_PCI_QUIRK(0x1631, 0xe017, "Packard Bell NEC IMEDIA 5204", 0), + /* Loud plock/pop noise via the green jack on playback start */ + SND_PCI_QUIRK(0x17aa, 0x1048, "Lenovo ThinkStation P340", 0), {} }; #endif /* CONFIG_PM */
On playback start there is a huge plock/pop noise via the green jack used in Line out mode. The only way I was able to fix it to set the power_save to 0 for the snd_hda_intel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> --- Hi Takashi, Changes since RFC: - Fixed up the PCI ID ever since I have this workstation (three weeks) the plock/pop noise on playback start bugged me. So far the only solution I have found is to disable the power_save which I find acceptable on a desktop compared to the pops. The alsa-info.sh output is can be found here: http://alsa-project.org/db/?f=414b1b236fc73db386ad4f938bc3b304f6b30b05 Missing details from alsa-info output: # lspci -nnk | grep -A2 Audio 00:1f.3 Audio device [0403]: Intel Corporation Comet Lake PCH cAVS [8086:06c8] DeviceName: Onboard - Sound Subsystem: Lenovo Device [17aa:1048] CPU: i9-10900k The machine have ALC623 codec and the jacks are correctly discovered and they do what they supposed to be. When I have the headset connected to the front and audio is routed there the line out (green jack) from the back still prodices the plock/pop. Is there a known quirk for similar issue or a better way to handle it? Thanks you, Peter Ujfalusi sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+)