| Message ID | 20210715141802.880911-4-daniel.baluta@oss.nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Read firmware, tplg and machine driver name from dts node | expand |
On Thu, Jul 15, 2021 at 8:18 AM Daniel Baluta <daniel.baluta@oss.nxp.com> wrote: > > From: Daniel Baluta <daniel.baluta@nxp.com> > > Document firmware-name, tplg-name and machine-drv-name properties. That's obvious from the diff. Why do you need these? > > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> > --- > .../devicetree/bindings/dsp/fsl,dsp.yaml | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml > index 7afc9f2be13a..8095aa178e7c 100644 > --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml > +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml > @@ -60,6 +60,22 @@ properties: > used by DSP (see bindings/reserved-memory/reserved-memory.txt) > maxItems: 1 > > + firmware-name: > + $ref: /schemas/types.yaml#/definitions/string > + description: > + If present, name of the file within the firmware search path containing > + the DSP firmware loaded by SOF at DSP boot time. > + > + tplg-name: > + $ref: /schemas/types.yaml#/definitions/string > + description: > + Should contain the audio topology file name loaded by SOF driver. Is this some format the DSP requires? Why do we need a separate file? This is defined by the board or user config? > + > + machine-drv-name: > + $ref: /schemas/types.yaml#/definitions/string > + description: > + Contains the ASoC machine driver name used by SOF to handle DSP audio scenario. Umm, no. > + > required: > - compatible > - reg > @@ -69,6 +85,8 @@ required: > - mboxes > - mbox-names > - memory-region > + - tplg-name > + - machine-drv-name > > additionalProperties: false > > @@ -90,4 +108,6 @@ examples: > mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1"; > mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>; > memory-region = <&dsp_reserved>; > + tplg-name = "sof-imx8-wm8960.tplg"; > + machine-drv-name = "asoc-simple-card"; > }; > -- > 2.27.0 >
On Thu, 15 Jul 2021 17:18:02 +0300, Daniel Baluta wrote: > From: Daniel Baluta <daniel.baluta@nxp.com> > > Document firmware-name, tplg-name and machine-drv-name properties. > > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> > --- > .../devicetree/bindings/dsp/fsl,dsp.yaml | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/arm,mhuv2.example.dt.yaml: dsp@596e8000: 'tplg-name' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mailbox/arm,mhuv2.example.dt.yaml: dsp@596e8000: 'machine-drv-name' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml \ndoc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1505740 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Thu, Jul 15, 2021 at 5:59 PM Rob Herring <robh+dt@kernel.org> wrote: > > On Thu, Jul 15, 2021 at 8:18 AM Daniel Baluta <daniel.baluta@oss.nxp.com> wrote: > > > > From: Daniel Baluta <daniel.baluta@nxp.com> > > > > Document firmware-name, tplg-name and machine-drv-name properties. > > That's obvious from the diff. > > Why do you need these? > > > > > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> > > --- > > .../devicetree/bindings/dsp/fsl,dsp.yaml | 20 +++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml > > index 7afc9f2be13a..8095aa178e7c 100644 > > --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml > > +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml > > @@ -60,6 +60,22 @@ properties: > > used by DSP (see bindings/reserved-memory/reserved-memory.txt) > > maxItems: 1 > > > > + firmware-name: > > + $ref: /schemas/types.yaml#/definitions/string > > + description: > > + If present, name of the file within the firmware search path containing > > + the DSP firmware loaded by SOF at DSP boot time. > > + > > + tplg-name: > > + $ref: /schemas/types.yaml#/definitions/string > > + description: > > + Should contain the audio topology file name loaded by SOF driver. > > Is this some format the DSP requires? Why do we need a separate file? > This is defined by the board or user config? This is not specific to DSP but to ALSA (See ALSA topology [1]). We need the .tplg file in order to describe the support Audio scenario by our board. This could be defined both by: board: - e.g our CPU board can have a baseboard attached (so the audio scenario changes). user config: - e.g user wants to enable post processing or any audio component. I couldnt find a good way to specify this except via DTS. Intel folks derive this information from ACPI tables. [1] https://www.alsa-project.org/wiki/ALSA_topology
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml index 7afc9f2be13a..8095aa178e7c 100644 --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml @@ -60,6 +60,22 @@ properties: used by DSP (see bindings/reserved-memory/reserved-memory.txt) maxItems: 1 + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + If present, name of the file within the firmware search path containing + the DSP firmware loaded by SOF at DSP boot time. + + tplg-name: + $ref: /schemas/types.yaml#/definitions/string + description: + Should contain the audio topology file name loaded by SOF driver. + + machine-drv-name: + $ref: /schemas/types.yaml#/definitions/string + description: + Contains the ASoC machine driver name used by SOF to handle DSP audio scenario. + required: - compatible - reg @@ -69,6 +85,8 @@ required: - mboxes - mbox-names - memory-region + - tplg-name + - machine-drv-name additionalProperties: false @@ -90,4 +108,6 @@ examples: mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1"; mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>; memory-region = <&dsp_reserved>; + tplg-name = "sof-imx8-wm8960.tplg"; + machine-drv-name = "asoc-simple-card"; };