diff mbox series

[4/4] slimbus: ngd: reset dma setup during runtime pm

Message ID 20210716102123.26861-5-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show
Series slimbus: ngd: fix runtime pm issues. | expand

Commit Message

Srinivas Kandagatla July 16, 2021, 10:21 a.m. UTC 
During suspend/resume NGD remote instance is power cycled along
with remotely controlled bam dma engine.
So Reset the dma configuration during this suspend resume path
so that we are not dealing with any stale dma setup.

Without this transactions timeout after first suspend resume path.

Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/slimbus/qcom-ngd-ctrl.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index f3ee8e036372..7040293c2ee8 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1080,7 +1080,8 @@  static void qcom_slim_ngd_setup(struct qcom_slim_ngd_ctrl *ctrl)
 {
 	u32 cfg = readl_relaxed(ctrl->ngd->base);
 
-	if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN)
+	if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN ||
+		ctrl->state == QCOM_SLIM_NGD_CTRL_ASLEEP)
 		qcom_slim_ngd_init_dma(ctrl);
 
 	/* By default enable message queues */
@@ -1131,6 +1132,7 @@  static int qcom_slim_ngd_power_up(struct qcom_slim_ngd_ctrl *ctrl)
 			dev_info(ctrl->dev, "Subsys restart: ADSP active framer\n");
 			return 0;
 		}
+		qcom_slim_ngd_setup(ctrl);
 		return 0;
 	}
 
@@ -1618,6 +1620,7 @@  static int __maybe_unused qcom_slim_ngd_runtime_suspend(struct device *dev)
 	struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev);
 	int ret = 0;
 
+	qcom_slim_ngd_exit_dma(ctrl);
 	if (!ctrl->qmi.handle)
 		return 0;