diff mbox series

[6/8] ASoC: cirrus: i2s: Prepare clock before using it

Message ID 20210726115058.23729-7-nikita.shubin@maquefel.me (mailing list archive)
State New, archived
Headers show
Series arm: ep93xx: CCF conversion | expand

Commit Message

Nikita Shubin July 26, 2021, 11:50 a.m. UTC 
From: Alexander Sverdlin <alexander.sverdlin@gmail.com>

Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:

WARNING: CPU: 0 PID: 97 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared mclk
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_i2s_hw_params
snd_soc_dai_hw_params
soc_pcm_hw_params
snd_pcm_hw_params
snd_pcm_ioctl
...

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
---
 sound/soc/cirrus/ep93xx-i2s.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/cirrus/ep93xx-i2s.c b/sound/soc/cirrus/ep93xx-i2s.c
index 0d26550d0df8..4d3179f03202 100644
--- a/sound/soc/cirrus/ep93xx-i2s.c
+++ b/sound/soc/cirrus/ep93xx-i2s.c
@@ -111,9 +111,9 @@  static void ep93xx_i2s_enable(struct ep93xx_i2s_info *info, int stream)
 	if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
 	    (ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
 		/* Enable clocks */
-		clk_enable(info->mclk);
-		clk_enable(info->sclk);
-		clk_enable(info->lrclk);
+		clk_prepare_enable(info->mclk);
+		clk_prepare_enable(info->sclk);
+		clk_prepare_enable(info->lrclk);
 
 		/* Enable i2s */
 		ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 1);
@@ -156,9 +156,9 @@  static void ep93xx_i2s_disable(struct ep93xx_i2s_info *info, int stream)
 		ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 0);
 
 		/* Disable clocks */
-		clk_disable(info->lrclk);
-		clk_disable(info->sclk);
-		clk_disable(info->mclk);
+		clk_disable_unprepare(info->lrclk);
+		clk_disable_unprepare(info->sclk);
+		clk_disable_unprepare(info->mclk);
 	}
 }