diff mbox series

[v2] ASoC: rt5682: Fix the vol+ button detection issue

Message ID 20210825040346.28346-1-derek.fang@realtek.com (mailing list archive)
State Accepted
Commit 8d3019b63b3d92c9b5f1548f600485d39262bbe1
Headers show
Series [v2] ASoC: rt5682: Fix the vol+ button detection issue | expand

Commit Message

Derek [方德義] Aug. 25, 2021, 4:03 a.m. UTC 
From: Derek Fang <derek.fang@realtek.com>

Fix the wrong button vol+ detection issue with some brand headsets
by fine tuning the threshold of button vol+ and SAR ADC button accuracy.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
---
 sound/soc/codecs/rt5682.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

Comments

Mark Brown Aug. 25, 2021, 3:06 p.m. UTC | #1 
On Wed, 25 Aug 2021 12:03:46 +0800, derek.fang@realtek.com wrote:
> From: Derek Fang <derek.fang@realtek.com>
> 
> Fix the wrong button vol+ detection issue with some brand headsets
> by fine tuning the threshold of button vol+ and SAR ADC button accuracy.
> 
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: rt5682: Fix the vol+ button detection issue
      commit: 8d3019b63b3d92c9b5f1548f600485d39262bbe1

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index fcf442b8a732..e822fa1b9d4b 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -43,7 +43,9 @@  static const struct reg_sequence patch_list[] = {
 	{RT5682_DAC_ADC_DIG_VOL1, 0xa020},
 	{RT5682_I2C_CTRL, 0x000f},
 	{RT5682_PLL2_INTERNAL, 0x8266},
-	{RT5682_SAR_IL_CMD_3, 0x8365},
+	{RT5682_SAR_IL_CMD_1, 0x22b7},
+	{RT5682_SAR_IL_CMD_3, 0x0365},
+	{RT5682_SAR_IL_CMD_6, 0x0110},
 };
 
 void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev)
@@ -1726,8 +1728,6 @@  static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 	SND_SOC_DAPM_MIXER("Stereo1 ADC MIXR", RT5682_STO1_ADC_DIG_VOL,
 		RT5682_R_MUTE_SFT, 1, rt5682_sto1_adc_r_mix,
 		ARRAY_SIZE(rt5682_sto1_adc_r_mix)),
-	SND_SOC_DAPM_SUPPLY("BTN Detection Mode", RT5682_SAR_IL_CMD_1,
-		14, 1, NULL, 0),
 
 	/* ADC PGA */
 	SND_SOC_DAPM_PGA("Stereo1 ADC MIX", SND_SOC_NOPM, 0, 0, NULL, 0),
@@ -1898,8 +1898,6 @@  static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
 	{"Stereo1 ADC MIXR", "ADC2 Switch", "Stereo1 ADC R2 Mux"},
 	{"Stereo1 ADC MIXR", NULL, "ADC Stereo1 Filter"},
 
-	{"ADC Stereo1 Filter", NULL, "BTN Detection Mode"},
-
 	{"Stereo1 ADC MIX", NULL, "Stereo1 ADC MIXL"},
 	{"Stereo1 ADC MIX", NULL, "Stereo1 ADC MIXR"},
 
@@ -2949,7 +2947,8 @@  static int rt5682_suspend(struct snd_soc_component *component)
 
 		/* enter SAR ADC power saving mode */
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
-			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_BUTDET_RST_MASK, 0);
+			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK |
+			RT5682_SAR_BUTDET_RST_MASK | RT5682_SAR_SEL_MB1_MB2_MASK, 0);
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
 			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_BUTDET_RST_MASK,
 			RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV | RT5682_SAR_BUTDET_RST_NORMAL);
@@ -2971,6 +2970,9 @@  static int rt5682_resume(struct snd_soc_component *component)
 	regcache_sync(rt5682->regmap);
 
 	if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) {
+		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
+			RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_SEL_MB1_MB2_MASK,
+			RT5682_SAR_BUTDET_POW_NORM | RT5682_SAR_SEL_MB1_MB2_AUTO);
 		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
 			RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK,
 			RT5682_CTRL_MB1_FSM | RT5682_CTRL_MB2_FSM);