@@ -188,13 +188,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
}
if (SND_SOC_DAPM_EVENT_ON(event)) {
- if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
- ret = clk_prepare_enable(priv->mclk);
- if (ret < 0) {
- dev_err(card->dev,
- "could not configure MCLK state");
- return ret;
- }
+ ret = clk_prepare_enable(priv->mclk);
+ if (ret < 0) {
+ dev_err(card->dev, "could not configure MCLK state");
+ return ret;
}
ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50);
} else {
@@ -207,8 +204,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
48000 * 512,
SND_SOC_CLOCK_IN);
if (!ret)
- if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN)
- clk_disable_unprepare(priv->mclk);
+ clk_disable_unprepare(priv->mclk);
}
if (ret < 0) {
@@ -629,29 +625,25 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
return ret;
}
- if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
- /*
- * The firmware might enable the clock at
- * boot (this information may or may not
- * be reflected in the enable clock register).
- * To change the rate we must disable the clock
- * first to cover these cases. Due to common
- * clock framework restrictions that do not allow
- * to disable a clock that has not been enabled,
- * we need to enable the clock first.
- */
- ret = clk_prepare_enable(priv->mclk);
- if (!ret)
- clk_disable_unprepare(priv->mclk);
+ /*
+ * The firmware might enable the clock at boot (this information
+ * may or may not be reflected in the enable clock register).
+ * To change the rate we must disable the clock first to cover
+ * these cases. Due to common clock framework restrictions that
+ * do not allow to disable a clock that has not been enabled,
+ * we need to enable the clock first.
+ */
+ ret = clk_prepare_enable(priv->mclk);
+ if (!ret)
+ clk_disable_unprepare(priv->mclk);
- if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
- ret = clk_set_rate(priv->mclk, 25000000);
- else
- ret = clk_set_rate(priv->mclk, 19200000);
+ if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
+ ret = clk_set_rate(priv->mclk, 25000000);
+ else
+ ret = clk_set_rate(priv->mclk, 19200000);
- if (ret)
- dev_err(card->dev, "unable to set MCLK rate\n");
- }
+ if (ret)
+ dev_err(card->dev, "unable to set MCLK rate\n");
report = 0;
if (BYT_RT5651_JDSRC(byt_rt5651_quirk))
@@ -1064,21 +1056,20 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port";
if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
- priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
+ priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
if (IS_ERR(priv->mclk)) {
ret_val = PTR_ERR(priv->mclk);
dev_err(dev,
"Failed to get MCLK from pmc_plt_clk_3: %d\n",
ret_val);
- /*
- * Fall back to bit clock usage for -ENOENT (clock not
- * available likely due to missing dependencies), bail
- * for all other errors, including -EPROBE_DEFER
- */
- if (ret_val != -ENOENT)
- goto err;
- byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
+ goto err;
}
+ /*
+ * Fall back to bit clock usage when clock is not
+ * available likely due to missing dependencies.
+ */
+ if (!priv->mclk)
+ byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
}
snprintf(byt_rt5651_components, sizeof(byt_rt5651_components),
The devm_clk_get_optional() helper returns NULL when devm_clk_get() returns -ENOENT. This makes things slightly cleaner. The added benefit is mostly cosmetic. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- sound/soc/intel/boards/bytcr_rt5651.c | 69 ++++++++++++--------------- 1 file changed, 30 insertions(+), 39 deletions(-)