diff mbox series

[1/2] ASoC: rt5682: Avoid the unexpected IRQ event during going to suspend

Message ID 20211109095450.12950-1-derek.fang@realtek.com (mailing list archive)
State Accepted
Commit a3774a2a6544a7a4a85186e768afc07044aa507f
Headers show
Series [1/2] ASoC: rt5682: Avoid the unexpected IRQ event during going to suspend | expand

Commit Message

Derek [方德義] Nov. 9, 2021, 9:54 a.m. UTC
From: Derek Fang <derek.fang@realtek.com>

When the system suspends, the codec driver will set SAR to
power saving mode if a headset is plugged in.
There is a chance to generate an unexpected IRQ, and leads to
issues after resuming such as noise from OMTP type headsets.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
---
 sound/soc/codecs/rt5682.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

Comments

Mark Brown Nov. 12, 2021, 9:27 p.m. UTC | #1
On Tue, 9 Nov 2021 17:54:49 +0800, derek.fang@realtek.com wrote:
> From: Derek Fang <derek.fang@realtek.com>
> 
> When the system suspends, the codec driver will set SAR to
> power saving mode if a headset is plugged in.
> There is a chance to generate an unexpected IRQ, and leads to
> issues after resuming such as noise from OMTP type headsets.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-linus

Thanks!

[1/2] ASoC: rt5682: Avoid the unexpected IRQ event during going to suspend
      commit: a3774a2a6544a7a4a85186e768afc07044aa507f
[2/2] ASoC: rt5682: Re-detect the combo jack after resuming
      commit: 2cd9b0ef82d936623d789bb3fbb6fcf52c500367

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 78b4cb5fb6c8..a486ac268c33 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -48,6 +48,7 @@  static const struct reg_sequence patch_list[] = {
 	{RT5682_SAR_IL_CMD_6, 0x0110},
 	{RT5682_CHARGE_PUMP_1, 0x0210},
 	{RT5682_HP_LOGIC_CTRL_2, 0x0007},
+	{RT5682_SAR_IL_CMD_2, 0xac00},
 };
 
 void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev)
@@ -2943,9 +2944,6 @@  static int rt5682_suspend(struct snd_soc_component *component)
 	cancel_delayed_work_sync(&rt5682->jack_detect_work);
 	cancel_delayed_work_sync(&rt5682->jd_check_work);
 	if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) {
-		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
-			RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK,
-			RT5682_CTRL_MB1_REG | RT5682_CTRL_MB2_REG);
 		val = snd_soc_component_read(component,
 				RT5682_CBJ_CTRL_2) & RT5682_JACK_TYPE_MASK;
 
@@ -2967,10 +2965,15 @@  static int rt5682_suspend(struct snd_soc_component *component)
 		/* enter SAR ADC power saving mode */
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
 			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK |
-			RT5682_SAR_BUTDET_RST_MASK | RT5682_SAR_SEL_MB1_MB2_MASK, 0);
+			RT5682_SAR_SEL_MB1_MB2_MASK, 0);
+		usleep_range(5000, 6000);
+		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
+			RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK,
+			RT5682_CTRL_MB1_REG | RT5682_CTRL_MB2_REG);
+		usleep_range(10000, 12000);
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
-			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_BUTDET_RST_MASK,
-			RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV | RT5682_SAR_BUTDET_RST_NORMAL);
+			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK,
+			RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV);
 	}
 
 	regcache_cache_only(rt5682->regmap, true);