@@ -896,11 +896,12 @@ int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol,
struct wm_adsp *dsp = &dsps[mc->shift - 1];
char preload[32];
- snprintf(preload, ARRAY_SIZE(preload), "%s Preload", dsp->cs_dsp.name);
+ if (dsp->preloaded == ucontrol->value.integer.value[0])
+ return 0;
- dsp->preloaded = ucontrol->value.integer.value[0];
+ snprintf(preload, ARRAY_SIZE(preload), "%s Preload", dsp->cs_dsp.name);
- if (ucontrol->value.integer.value[0])
+ if (ucontrol->value.integer.value[0] || dsp->toggle_preload)
snd_soc_component_force_enable_pin(component, preload);
else
snd_soc_component_disable_pin(component, preload);
@@ -909,6 +910,13 @@ int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol,
flush_work(&dsp->boot_work);
+ dsp->preloaded = ucontrol->value.integer.value[0];
+
+ if (dsp->toggle_preload) {
+ snd_soc_component_disable_pin(component, preload);
+ snd_soc_dapm_sync(dapm);
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(wm_adsp2_preloader_put);
@@ -41,6 +41,14 @@ struct wm_adsp {
struct list_head compr_list;
struct list_head buffer_list;
+
+ /*
+ * Flag indicating the preloader widget only needs power toggled
+ * on state change rather than held on for the duration of the
+ * preload, useful for devices that can retain firmware memory
+ * across power down.
+ */
+ bool toggle_preload;
};
#define WM_ADSP1(wname, num) \
In the case a device can support retaining the firmware memory across low power states it is useful for the preloader widget to only power up whilst actually loading/unloading the core, as opposed to the normal operation where the widget is powered for the entire time a firmware is preloaded onto the core. Add support for this mode and a flag to enable it. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> --- sound/soc/codecs/wm_adsp.c | 14 +++++++++++--- sound/soc/codecs/wm_adsp.h | 8 ++++++++ 2 files changed, 19 insertions(+), 3 deletions(-)