@@ -34,11 +34,9 @@
#include <linux/omap-dma.h>
-#ifdef CONFIG_ARCH_OMAP1
#include <mach/hardware.h>
#include <linux/soc/ti/omap1-io.h>
#include <linux/soc/ti/omap1-soc.h>
-#endif
/*
* MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
@@ -51,16 +49,7 @@
#undef DEBUG
-#ifndef CONFIG_ARCH_OMAP1
-enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
- DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
-};
-
-enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
-#endif
-
#define OMAP_DMA_ACTIVE 0x01
-#define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
@@ -94,13 +83,9 @@ static inline void omap_disable_channel_irq(int lch)
/* disable channel interrupts */
p->dma_write(0, CICR, lch);
/* Clear CSR */
- if (dma_omap1())
- p->dma_read(CSR, lch);
- else
- p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+ p->dma_read(CSR, lch);
}
-#ifdef CONFIG_ARCH_OMAP1
static inline void set_gdma_dev(int req, int dev)
{
u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
@@ -112,11 +97,6 @@ static inline void set_gdma_dev(int req, int dev)
l |= (dev - 1) << shift;
omap_writel(l, reg);
}
-#else
-#define set_gdma_dev(req, dev) do {} while (0)
-#define omap_readl(reg) 0
-#define omap_writel(val, reg) do {} while (0)
-#endif
#ifdef CONFIG_ARCH_OMAP1
void omap_set_dma_priority(int lch, int dst_port, int priority)
@@ -181,59 +161,24 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
int dma_trigger, int src_or_dst_synch)
{
u32 l;
+ u16 ccr;
l = p->dma_read(CSDP, lch);
l &= ~0x03;
l |= data_type;
p->dma_write(l, CSDP, lch);
- if (dma_omap1()) {
- u16 ccr;
-
- ccr = p->dma_read(CCR, lch);
- ccr &= ~(1 << 5);
- if (sync_mode == OMAP_DMA_SYNC_FRAME)
- ccr |= 1 << 5;
- p->dma_write(ccr, CCR, lch);
-
- ccr = p->dma_read(CCR2, lch);
- ccr &= ~(1 << 2);
- if (sync_mode == OMAP_DMA_SYNC_BLOCK)
- ccr |= 1 << 2;
- p->dma_write(ccr, CCR2, lch);
- }
-
- if (dma_omap2plus() && dma_trigger) {
- u32 val;
-
- val = p->dma_read(CCR, lch);
-
- /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
- val &= ~((1 << 23) | (3 << 19) | 0x1f);
- val |= (dma_trigger & ~0x1f) << 14;
- val |= dma_trigger & 0x1f;
-
- if (sync_mode & OMAP_DMA_SYNC_FRAME)
- val |= 1 << 5;
- else
- val &= ~(1 << 5);
-
- if (sync_mode & OMAP_DMA_SYNC_BLOCK)
- val |= 1 << 18;
- else
- val &= ~(1 << 18);
-
- if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
- val &= ~(1 << 24); /* dest synch */
- val |= (1 << 23); /* Prefetch */
- } else if (src_or_dst_synch) {
- val |= 1 << 24; /* source synch */
- } else {
- val &= ~(1 << 24); /* dest synch */
- }
- p->dma_write(val, CCR, lch);
- }
+ ccr = p->dma_read(CCR, lch);
+ ccr &= ~(1 << 5);
+ if (sync_mode == OMAP_DMA_SYNC_FRAME)
+ ccr |= 1 << 5;
+ p->dma_write(ccr, CCR, lch);
+ ccr = p->dma_read(CCR2, lch);
+ ccr &= ~(1 << 2);
+ if (sync_mode == OMAP_DMA_SYNC_BLOCK)
+ ccr |= 1 << 2;
+ p->dma_write(ccr, CCR2, lch);
p->dma_write(elem_count, CEN, lch);
p->dma_write(frame_count, CFN, lch);
}
@@ -241,7 +186,7 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
{
- if (dma_omap1() && !dma_omap15xx()) {
+ if (!dma_omap15xx()) {
u32 l;
l = p->dma_read(LCH_CTRL, lch);
@@ -258,15 +203,12 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
int src_ei, int src_fi)
{
u32 l;
+ u16 w;
- if (dma_omap1()) {
- u16 w;
-
- w = p->dma_read(CSDP, lch);
- w &= ~(0x1f << 2);
- w |= src_port << 2;
- p->dma_write(w, CSDP, lch);
- }
+ w = p->dma_read(CSDP, lch);
+ w &= ~(0x1f << 2);
+ w |= src_port << 2;
+ p->dma_write(w, CSDP, lch);
l = p->dma_read(CCR, lch);
l &= ~(0x03 << 12);
@@ -304,26 +246,15 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- if (dma_omap2plus())
- burst = 0x1;
- else
- burst = 0x2;
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- if (dma_omap2plus()) {
- burst = 0x2;
- break;
- }
/*
* not supported by current hardware on OMAP1
* w |= (0x03 << 7);
*/
fallthrough;
case OMAP_DMA_DATA_BURST_16:
- if (dma_omap2plus()) {
- burst = 0x3;
- break;
- }
/* OMAP1 don't support burst 16 */
fallthrough;
default:
@@ -342,12 +273,10 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
{
u32 l;
- if (dma_omap1()) {
- l = p->dma_read(CSDP, lch);
- l &= ~(0x1f << 9);
- l |= dest_port << 9;
- p->dma_write(l, CSDP, lch);
- }
+ l = p->dma_read(CSDP, lch);
+ l &= ~(0x1f << 9);
+ l |= dest_port << 9;
+ p->dma_write(l, CSDP, lch);
l = p->dma_read(CCR, lch);
l &= ~(0x03 << 14);
@@ -385,22 +314,12 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- if (dma_omap2plus())
- burst = 0x1;
- else
- burst = 0x2;
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- if (dma_omap2plus())
- burst = 0x2;
- else
- burst = 0x3;
+ burst = 0x3;
break;
case OMAP_DMA_DATA_BURST_16:
- if (dma_omap2plus()) {
- burst = 0x3;
- break;
- }
/* OMAP1 don't support burst 16 */
fallthrough;
default:
@@ -416,10 +335,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
static inline void omap_enable_channel_irq(int lch)
{
/* Clear CSR */
- if (dma_omap1())
- p->dma_read(CSR, lch);
- else
- p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+ p->dma_read(CSR, lch);
/* Enable some nice interrupts. */
p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
@@ -437,8 +353,7 @@ static inline void enable_lnk(int lch)
l = p->dma_read(CLNK_CTRL, lch);
- if (dma_omap1())
- l &= ~(1 << 14);
+ l &= ~(1 << 14);
/* Set the ENABLE_LNK bits */
if (dma_chan[lch].next_lch != -1)
@@ -456,15 +371,8 @@ static inline void disable_lnk(int lch)
/* Disable interrupts */
omap_disable_channel_irq(lch);
- if (dma_omap1()) {
- /* Set the STOP_LNK bit */
- l |= 1 << 14;
- }
-
- if (dma_omap2plus()) {
- /* Clear the ENABLE_LNK bit */
- l &= ~(1 << 15);
- }
+ /* Set the STOP_LNK bit */
+ l |= 1 << 14;
p->dma_write(l, CLNK_CTRL, lch);
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
@@ -508,8 +416,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
- if (dma_omap1())
- chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+ chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
if (dma_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
@@ -522,7 +429,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
* id.
*/
p->dma_write(dev_id | (1 << 10), CCR, free_ch);
- } else if (dma_omap1()) {
+ } else {
p->dma_write(dev_id, CCR, free_ch);
}
@@ -739,8 +646,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
offset = p->dma_read(CSSA, lch);
}
- if (dma_omap1())
- offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
+ offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
return offset;
}
@@ -778,8 +684,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
offset = p->dma_read(CDSA, lch);
}
- if (dma_omap1())
- offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
+ offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
return offset;
}
@@ -796,9 +701,8 @@ int omap_dma_running(void)
{
int lch;
- if (dma_omap1())
- if (omap_lcd_dma_running())
- return 1;
+ if (omap_lcd_dma_running())
+ return 1;
for (lch = 0; lch < dma_chan_count; lch++)
if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
@@ -809,8 +713,6 @@ int omap_dma_running(void)
/*----------------------------------------------------------------------------*/
-#ifdef CONFIG_ARCH_OMAP1
-
static int omap1_dma_handle_ch(int ch)
{
u32 csr;
@@ -863,10 +765,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
return handled ? IRQ_HANDLED : IRQ_NONE;
}
-#else
-#define omap1_dma_irq_handler NULL
-#endif
-
struct omap_system_dma_plat_info *omap_get_plat_info(void)
{
return p;
@@ -912,29 +810,27 @@ static int omap_system_dma_probe(struct platform_device *pdev)
if (ch >= 6 && enable_1510_mode)
continue;
- if (dma_omap1()) {
- /*
- * request_irq() doesn't like dev_id (ie. ch) being
- * zero, so we have to kludge around this.
- */
- sprintf(&irq_name[0], "%d", ch);
- dma_irq = platform_get_irq_byname(pdev, irq_name);
-
- if (dma_irq < 0) {
- ret = dma_irq;
- goto exit_dma_irq_fail;
- }
-
- /* INT_DMA_LCD is handled in lcd_dma.c */
- if (dma_irq == INT_DMA_LCD)
- continue;
-
- ret = request_irq(dma_irq,
- omap1_dma_irq_handler, 0, "DMA",
- (void *) (ch + 1));
- if (ret != 0)
- goto exit_dma_irq_fail;
+ /*
+ * request_irq() doesn't like dev_id (ie. ch) being
+ * zero, so we have to kludge around this.
+ */
+ sprintf(&irq_name[0], "%d", ch);
+ dma_irq = platform_get_irq_byname(pdev, irq_name);
+
+ if (dma_irq < 0) {
+ ret = dma_irq;
+ goto exit_dma_irq_fail;
}
+
+ /* INT_DMA_LCD is handled in lcd_dma.c */
+ if (dma_irq == INT_DMA_LCD)
+ continue;
+
+ ret = request_irq(dma_irq,
+ omap1_dma_irq_handler, 0, "DMA",
+ (void *) (ch + 1));
+ if (ret != 0)
+ goto exit_dma_irq_fail;
}
/* reserve dma channels 0 and 1 in high security devices on 34xx */
@@ -954,9 +850,6 @@ static int omap_system_dma_remove(struct platform_device *pdev)
{
int dma_irq, irq_rel = 0;
- if (dma_omap2plus())
- return 0;
-
for ( ; irq_rel < dma_chan_count; irq_rel++) {
dma_irq = platform_get_irq(pdev, irq_rel);
free_irq(dma_irq, (void *)(irq_rel + 1));