| Message ID | 20220630150135.1799535-3-sbinding@opensource.cirrus.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Read _SUB from ACPI to be able to identify firmware | expand |
On 6/30/22 10:01, Stefan Binding wrote: > When loading firmware, wm_adsp uses a number of parameters to > determine the path of the firmware and tuning files to load. > One of these parameters is system_name. > Add support in cs35l41 to read this system name from the ACPI > _SUB ID in order to uniquely identify the firmware and tuning > mapped to a particular system. It's my understanding that the _SUB method is optional, not required. It may be wise to plan for a fallback, e.g to use DMI quirks or other identifiers, no? If it's used quite widely, then it may be a good thing to add to 'alsa-info'. > Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> > --- > sound/soc/codecs/cs35l41.c | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/sound/soc/codecs/cs35l41.c b/sound/soc/codecs/cs35l41.c > index 8766e19d85f1..d70469686699 100644 > --- a/sound/soc/codecs/cs35l41.c > +++ b/sound/soc/codecs/cs35l41.c > @@ -6,6 +6,7 @@ > // > // Author: David Rhodes <david.rhodes@cirrus.com> > > +#include <linux/acpi.h> > #include <linux/delay.h> > #include <linux/err.h> > #include <linux/init.h> > @@ -1142,6 +1143,24 @@ static int cs35l41_dsp_init(struct cs35l41_private *cs35l41) > return ret; > } > > +static int cs35l41_acpi_get_name(struct cs35l41_private *cs35l41) > +{ > + acpi_handle handle = ACPI_HANDLE(cs35l41->dev); > + const char *sub; > + > + /* If there is no ACPI_HANDLE, there is no ACPI for this system, return 0 */ > + if (!handle) > + return 0; > + > + sub = acpi_get_subsystem_id(handle); > + if (IS_ERR(sub)) > + return PTR_ERR(sub); > + > + cs35l41->dsp.system_name = sub; > + dev_dbg(cs35l41->dev, "Susystem ID: %s\n", cs35l41->dsp.system_name); Typo: Subsystem > + return 0; > +} > + > int cs35l41_probe(struct cs35l41_private *cs35l41, const struct cs35l41_hw_cfg *hw_cfg) > { > u32 regid, reg_revid, i, mtl_revid, int_status, chipid_match; > @@ -1270,6 +1289,10 @@ int cs35l41_probe(struct cs35l41_private *cs35l41, const struct cs35l41_hw_cfg * > goto err; > } > > + ret = cs35l41_acpi_get_name(cs35l41); > + if (ret < 0) > + goto err; > + > ret = cs35l41_dsp_init(cs35l41); > if (ret < 0) > goto err; > @@ -1316,6 +1339,7 @@ void cs35l41_remove(struct cs35l41_private *cs35l41) > pm_runtime_disable(cs35l41->dev); > > regmap_write(cs35l41->regmap, CS35L41_IRQ1_MASK1, 0xFFFFFFFF); > + kfree(cs35l41->dsp.system_name); > wm_adsp2_remove(&cs35l41->dsp); > cs35l41_safe_reset(cs35l41->regmap, cs35l41->hw_cfg.bst_type); >
On Thu, Jun 30, 2022 at 01:35:05PM -0500, Pierre-Louis Bossart wrote: > It's my understanding that the _SUB method is optional, not required. It > may be wise to plan for a fallback, e.g to use DMI quirks or other > identifiers, no? Presumably the fallback would go into cs35l41_acpi_get_name()?
On 6/30/22 14:34, Mark Brown wrote: > On Thu, Jun 30, 2022 at 01:35:05PM -0500, Pierre-Louis Bossart wrote: > >> It's my understanding that the _SUB method is optional, not required. It >> may be wise to plan for a fallback, e.g to use DMI quirks or other >> identifiers, no? > > Presumably the fallback would go into cs35l41_acpi_get_name()? That's what I had in mind, if this _SUB does not exist then you could use something else instead of returning -ENODATA; + sub = acpi_get_subsystem_id(handle); + if (IS_ERR(sub)) + return PTR_ERR(sub); + + cs35l41->dsp.system_name = sub;
diff --git a/sound/soc/codecs/cs35l41.c b/sound/soc/codecs/cs35l41.c index 8766e19d85f1..d70469686699 100644 --- a/sound/soc/codecs/cs35l41.c +++ b/sound/soc/codecs/cs35l41.c @@ -6,6 +6,7 @@ // // Author: David Rhodes <david.rhodes@cirrus.com> +#include <linux/acpi.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/init.h> @@ -1142,6 +1143,24 @@ static int cs35l41_dsp_init(struct cs35l41_private *cs35l41) return ret; } +static int cs35l41_acpi_get_name(struct cs35l41_private *cs35l41) +{ + acpi_handle handle = ACPI_HANDLE(cs35l41->dev); + const char *sub; + + /* If there is no ACPI_HANDLE, there is no ACPI for this system, return 0 */ + if (!handle) + return 0; + + sub = acpi_get_subsystem_id(handle); + if (IS_ERR(sub)) + return PTR_ERR(sub); + + cs35l41->dsp.system_name = sub; + dev_dbg(cs35l41->dev, "Susystem ID: %s\n", cs35l41->dsp.system_name); + return 0; +} + int cs35l41_probe(struct cs35l41_private *cs35l41, const struct cs35l41_hw_cfg *hw_cfg) { u32 regid, reg_revid, i, mtl_revid, int_status, chipid_match; @@ -1270,6 +1289,10 @@ int cs35l41_probe(struct cs35l41_private *cs35l41, const struct cs35l41_hw_cfg * goto err; } + ret = cs35l41_acpi_get_name(cs35l41); + if (ret < 0) + goto err; + ret = cs35l41_dsp_init(cs35l41); if (ret < 0) goto err; @@ -1316,6 +1339,7 @@ void cs35l41_remove(struct cs35l41_private *cs35l41) pm_runtime_disable(cs35l41->dev); regmap_write(cs35l41->regmap, CS35L41_IRQ1_MASK1, 0xFFFFFFFF); + kfree(cs35l41->dsp.system_name); wm_adsp2_remove(&cs35l41->dsp); cs35l41_safe_reset(cs35l41->regmap, cs35l41->hw_cfg.bst_type);
When loading firmware, wm_adsp uses a number of parameters to determine the path of the firmware and tuning files to load. One of these parameters is system_name. Add support in cs35l41 to read this system name from the ACPI _SUB ID in order to uniquely identify the firmware and tuning mapped to a particular system. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> --- sound/soc/codecs/cs35l41.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)